What are the steps required for the installation of a new driveaxle nut, suspension strut-to-steering knuckle bolt nuts, and tie-rod end nut on 2002 Volkswagen Cabrio?

Installation To install, remove the driveaxle nut, tie-rod end nut, and suspension strut-to-steering knuckle bolt nuts. Take out the wheel, loosen the required parts, and take off the steering knuckle. Re-assemble parts by aligning them, closing to a required torque then attaching the wheel back again.

Genuine 2002 Volkswagen Cabrio Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2002 Volkswagen Cabrio Knuckle Part Number: 357-407-255-C
$308.66 MSRP: $421.67
You Save: $113.01 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Steering Knuckle
- Position: Left
- Item Weight: 11.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 357-407-255-C
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
More Info
Fits the following 2002 Volkswagen Cabrio Submodels:
- Base, GL, GLS, GLX, High Line | 4 Cyl 2.0 L GAS
View related parts
2002 Volkswagen Cabrio Knuckle Part Number: 357-407-256-C
$318.42 MSRP: $435.00
You Save: $116.58 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Steering Knuckle
- Position: Right
- Item Weight: 11.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 357-407-256-C
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
More Info
Fits the following 2002 Volkswagen Cabrio Submodels:
- Base, GL, GLS, GLX, High Line | 4 Cyl 2.0 L GAS

2002 Volkswagen Cabrio Steering Knuckle Parts and Q&A

Q: What are the steps required for the installation of a new driveaxle nut, suspension strut-to-steering knuckle bolt nuts, and tie-rod end nut on 2002 Volkswagen Cabrio?
A: Installation To install, remove the driveaxle nut, tie-rod end nut, and suspension strut-to-steering knuckle bolt nuts. Take out the wheel, loosen the required parts, and take off the steering knuckle. Re-assemble parts by aligning them, closing to a required torque then attaching the wheel back again.