Other Name: Controls; Dash Control Unit, Heater Control
Item Weight: 1.10 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 5C0-820-047-CT-XSH
Warranty: This genuine part is guaranteed by Volkswagen's
factory warranty.
Fits the following 2017 Volkswagen Jetta Submodels:
Base, GLI, Hybrid, Hybrid SE, Hybrid SEL, Hybrid SEL Premium, S, SE, SE Sport, SEL, Sport, TDI, TDI Premium, TDI S, TDI SE, TDI SEL, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
Warranty: This genuine part is guaranteed by Volkswagen's
factory warranty.
More Info
Fits the following 2017 Volkswagen Jetta Submodels:
Base, GLI, GLI SE, GLI SEL, Hybrid, Hybrid SE, Hybrid SEL, Hybrid SEL Premium, S, SE, SE Sport, SEL, SEL Premium, Sport, TDI, TDI Premium, TDI S, TDI SE, TDI SEL, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
Warranty: This genuine part is guaranteed by Volkswagen's
factory warranty.
More Info
Fits the following 2017 Volkswagen Jetta Submodels:
Base, GLI, Hybrid, Hybrid SE, Hybrid SEL, Hybrid SEL Premium, S, SE, SEL, TDI, TDI Premium, TDI S, TDI SE, TDI SEL | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
Warranty: This genuine part is guaranteed by Volkswagen's
factory warranty.
More Info
Fits the following 2017 Volkswagen Jetta Submodels:
GLI, GLI SE, GLI SEL, Hybrid SEL Premium, S, SE, SE Sport, SEL, SEL Premium, Sport, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
2017 Volkswagen Jetta A/C Switch Parts and Q&A
Q: What precautions should be taken when disconnecting the battery and removing the A/C switch and air conditioning control assembly on 2017 Volkswagen Jetta?
A: Some of the systems require re-learning after removal of the battery. To begin with, remove a negative cable. Take out the trim panel on the control assembly, screws and disconnect electrical connectors. In case of flexible shafts, take out the glove box and support fasteners and disconnect the flexible shaft. Elimination is deinstallation that is the opposite of installing.