How to replace the Hood Release Cable on Volkswagen Golf?

The hood latch release cable used on this model has two components which include one that is joined with the hood latch and the other one joins with the release lever located in the vehicle. One should never leave the release cable of the release lever and hood latch locked in place. Firstly, unlock the hood and pull the release cable connector out of the metal support directly over the left-hand side headlamp housing and unpack the plastic cover and loosen the cables. Proceed to use a small screwdriver to lift up the clip on the inside of the vehicle and take out the lever. The second step is to pry up the front part of the sill trim and driver side kick panel, and remove the cable housing in the release lever, and the end of the cable out of the release arm. Disconnect any other retaining points in the engine compartment one of which the release cable is attached to, and connect a wire or string to the end of the old cable. When in the passenger compartment, install the cable by pulling through cowl into passenger compartment, and attaching the new cable to the string or wire and pulling it through cowl into engine compartment. The rest of the installation proceeds in designation with the opposite of the removal process, making sure that all cable holding clips are secured in their respective places. Removing the hood safety lever: This can be done by unbolting it and attaching the bolt positions to the lever on any occasion where it needs to be adjusted, loosening the bolts, and positioning the lever to align perfectly with the latch when the hood is closed and then tightening the bolts back.

Genuine Volkswagen Golf Hood Release Cable

Hood Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Hood Release Cables found

View related parts
Volkswagen Golf Release Cable Part Number: 5K1-823-531
$29.51 MSRP: $49.18
You Save: $19.67 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2010-2014 Volkswagen Golf | Base, TDI | 4 Cyl 2.0 L DIESEL, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Golf Release Cable Part Number: 5G1-823-531-C
$33.71 MSRP: $56.18
You Save: $22.47 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2015-2021 Volkswagen Golf | Base, Launch Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL, TSi, Wolfsburg Edition | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
View related parts
Volkswagen Golf Cable Part Number: 1J1-823-531-C
$54.71 MSRP: $75.99
You Save: $21.28 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 1J1-823-531-B, 1HM-823-531
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1993-2006 Volkswagen Golf | Celebration Edition, City, GL, GL TDI, GLS, GLS TDI, GTI, GTI 1.8T, GTI 20th Anniversary, GTI 337, GTI GLS, GTI GLX, GTI VR6, Jazz, K2, Limited Edition, Sport, TDI, Trek, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Golf Release Cable Part Number: 5G0-823-535-B
$72.58 MSRP: $101.65
You Save: $29.07 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
- Replaces: 5G0-823-535-A
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2015-2021 Volkswagen Golf | Base, Launch Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL, TSi, Wolfsburg Edition | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
View related parts
Volkswagen Golf Release Cable Part Number: 5K0-823-535
$66.63 MSRP: $93.32
You Save: $26.69 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2010-2014 Volkswagen Golf | Base, TDI | 4 Cyl 2.0 L DIESEL, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Golf Cable Part Number: 192-823-531
$35.86 MSRP: $59.76
You Save: $23.90 (40%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1985-1992 Volkswagen Golf | Base, GL, GT, GTI, GTI 16-Valve, GTI 8-Valve | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS

Volkswagen Golf Hood Release Cable

Choose OEM Hood Release Cable for superior quality and long-lasting durability. They match the Volkswagen's factory specifications exactly and pass strict quality control. If you plan to replace Hood Release Cable on your Golf, put OEM at the top of your list. You'll get the right fit, reliable performance, and peace of mind. We stock an extensive inventory of genuine Volkswagen Golf parts. It is easy to find what you need. You will love our competitive prices that help you save. No more hassle with returns or guesswork. Every part includes a warranty straight from the manufacturer. Get trusted quality, strong durability, and real value today.

Volkswagen Golf Hood Release Cable Parts and Q&A

Release Cable
5G0-823-535-B
Q: How to replace the Hood Release Cable on Volkswagen Golf?
A:
The Hood Latch release cable used on this model has two components which include one that is joined with the Hood latch and the other one joins with the release lever located in the vehicle. One should never leave the release cable of the release lever and hood latch locked in place. Firstly, unlock the hood and pull the release cable connector out of the metal support directly over the left-hand side headlamp housing and unpack the plastic cover and loosen the cables. Proceed to use a small screwdriver to lift up the clip on the inside of the vehicle and take out the lever. The second step is to pry up the front part of the sill trim and driver side kick panel, and remove the cable housing in the release lever, and the end of the cable out of the release arm. Disconnect any other retaining points in the engine compartment one of which the release cable is attached to, and connect a wire or string to the end of the old cable. When in the passenger compartment, install the cable by pulling through cowl into passenger compartment, and attaching the new cable to the string or wire and pulling it through cowl into engine compartment. The rest of the installation proceeds in designation with the opposite of the removal process, making sure that all cable holding clips are secured in their respective places. Removing the hood safety lever: This can be done by unbolting it and attaching the bolt positions to the lever on any occasion where it needs to be adjusted, loosening the bolts, and positioning the lever to align perfectly with the latch when the hood is closed and then tightening the bolts back.