How to replace the lift support and trunk lid latch for sedan on Volkswagen Golf?

In models which have a trunk lock cylinder built into the trunk latch/actuator, the integrated part cannot be changed independently and must be changed as a whole. In order to unlock the latch, pull the trunk open and unplug the cable at the negative battery terminal, and the inner trim panel should be taken away in the trunk lid. There are models where the latch has a plastic trim cover, which must be pressed by depressing the retaining tab then slide off. The second stage is to undress the electrical connector of the latch, sketch the installed location of the latch bracket using a marker, pull out the mounting nuts, and extract the latch assembly. The reverse order is followed during reinstallation, so as not to be out of the marks that were drawn during removal. In the case of the support struts, open the trunk, the upper carpet has a pin that holds the carpet in place, peel back the carpet to reveal the inner lift support strut retaining clip. As you hold the trunk, disengage the support strut ends and take them off. The process of re-installation is also in reverse order. In order to deal with the release switch and backup camera assembly, unscrew the cable in the negative battery terminal, and then snap out the trunk lid trim panel. Unscrew the electrical connectors and pull out the switch holding nuts before detaching the switch assembly on the outside of the trunk lid, and re-connect the switch assembly in reverse order.

Genuine Volkswagen Golf Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Trunk Lid Latches found

View related parts
Volkswagen Golf Lock Part Number: 1J6-827-505-C-B41
$117.80 MSRP: $164.99
You Save: $47.19 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch
- Replaces: 1J6-827-505-B-B41, 1J6-827-505-B
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1999-2006 Volkswagen Golf | GL, GL TDI, GLS, GLS TDI, GTI, GTI 1.8T, GTI 20th Anniversary, GTI 337, GTI GLS, GTI GLX, GTI VR6, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Golf Lock Part Number: 5K0-827-505-C-9B9
$134.46 MSRP: $188.32
You Save: $53.86 (29%)
ADD TO CART
Product Specifications
- Other Name: Latch; Lock
- Replaces: 5K0-827-505-A-9B9, 5K0-827-505-9B9
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2010-2014 Volkswagen Golf | Base, TDI | 4 Cyl 2.0 L DIESEL, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Golf Lock Part Number: 5G6-827-505-B-9B9
$420.89 MSRP: $574.99
You Save: $154.10 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch; Lock
- Replaces: 5G6-827-505-9B9, 5G6-827-505-C-9B9, 5G6-827-505-A-9B9
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2015-2021 Volkswagen Golf | Base, Launch Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL, TSi, Wolfsburg Edition | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
View related parts
Volkswagen Golf Lock Part Number: 191-827-505
$34.20 MSRP: $57.00
You Save: $22.80 (40%)
ADD TO CART
Product Specifications
- Other Name: Latch
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1985-1992 Volkswagen Golf | Base, GL, GT, GTI, GTI 16-Valve, GTI 8-Valve | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Golf Lock Part Number: 1H6-827-505-B
$56.40 MSRP: $78.33
You Save: $21.93 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch; Trunk Lock
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1996-1998, 1994 Volkswagen Golf | GTI | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Golf Lock Part Number: 1HM-827-505-A
$33.88 MSRP: $47.04
You Save: $13.16 (28%)
ADD TO CART
Product Specifications
- Other Name: Latch; Trunk Lock
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1993-1999 Volkswagen Golf | Celebration Edition, City, GL, GTI, GTI VR6, Jazz, K2, Limited Edition, Sport, Trek, Wolfsburg Edition | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS

Volkswagen Golf Trunk Lid Latch

Choose OEM Trunk Lid Latch for superior quality and long-lasting durability. They match the Volkswagen's factory specifications exactly and pass strict quality control. If you plan to replace Trunk Lid Latch on your Golf, put OEM at the top of your list. You'll get the right fit, reliable performance, and peace of mind. We stock an extensive inventory of genuine Volkswagen Golf parts. It is easy to find what you need. You will love our competitive prices that help you save. No more hassle with returns or guesswork. Every part includes a warranty straight from the manufacturer. Get trusted quality, strong durability, and real value today.

Volkswagen Golf Trunk Lid Latch Parts and Q&A

Lock
5G6-827-505-B-9B9
Q: How to replace the lift support and trunk lid latch for sedan on Volkswagen Golf?
A:
In models which have a trunk lock cylinder built into the trunk latch/actuator, the integrated part cannot be changed independently and must be changed as a whole. In order to unlock the latch, pull the trunk open and unplug the cable at the negative battery terminal, and the inner trim panel should be taken away in the trunk lid. There are models where the latch has a plastic trim cover, which must be pressed by depressing the retaining tab then slide off. The second stage is to undress the electrical connector of the latch, sketch the installed location of the latch bracket using a marker, pull out the mounting nuts, and extract the latch assembly. The reverse order is followed during reinstallation, so as not to be out of the marks that were drawn during removal. In the case of the support struts, open the trunk, the upper carpet has a pin that holds the carpet in place, peel back the carpet to reveal the inner lift support strut retaining clip. As you hold the trunk, disengage the support strut ends and take them off. The process of re-installation is also in reverse order. In order to deal with the release switch and backup camera assembly, unscrew the cable in the negative battery terminal, and then snap out the trunk lid trim panel. Unscrew the electrical connectors and pull out the switch holding nuts before detaching the switch assembly on the outside of the trunk lid, and re-connect the switch assembly in reverse order.