Genuine Volkswagen Golf SportWagen Blower Motor

Volkswagen Golf SportWagen Blower Motor Parts and Q&A

• Blower Motor
  5Q1-819-021-H
  Q: How to replace the blower motor and blower motor resistor on Volkswagen Golf SportWagen?

  A:

  The blower control module is fitted as part of the blower motor and cannot be changed independently. First of all, take the trim panel off of under the glove box by removing the fasteners on the trim panel. The second step is to disconnect the electrical connector with the blower motor. Draw the locking tab of the blower motor downwards, turn the assembly counterclockwise, and pull out the blower motor, it can be important to note that some models can be secured by a retaining screw which must be removed before the housing can turn. To install, unwind the step back process by turning the blower housing until it meets the stop. In order to deal with the blower motor resistor, unconnection of the electrical connector with the resistor, and pushing the locking tab in the direction of the connector terminals to free the resistor. Take out the heater and air conditioning housing blower motor resistor by pushing the tab inwards. Lastly, removal is reversed followed by installation.