The catalytic converter and the front exhaust pipe are between one component. Start by taking off the engine cover. Weakening procedure- Loosen the right-front wheel bolts and then raise the front of the vehicle and place it on jackstands. The second step is to remove the under-vehicle splash shield. Lose the inner fender liner to the right, as needed. The next step is to take out the upstream and downstream
Oxygen Sensors of the catalytic converter. Should you have it, take out the heat shield at the turbo charger. Afterward, remove the fasteners / clamps, which hold the front exhaust pipe with the catalytic converter to a manifold, cylinder head and or turbocharger. Unscrew the support ejaculatory bracket bolts and eliminate the support bracket. Disassemble the connections between the clamps which hold the catalytic converter to the rear exhaust and take out the catalytic converter along with the front exhaust pipe. Get rid of the old flange gasket and clamps. To install, follow the reverse procedure of the removal, and make sure to apply new gaskets and self-locking nuts when securing all the fasteners.