How to remove and install the rear axle beam on Volkswagen Jetta?

Loose the bolts of the rear wheel, raise the rear part of the vehicle and place it firmly on jackstands with the front wheels blocked to avoid rolling. Take off the rear wheels, undo the parking brake and undo the parking brake adjustment nut till the cables may be pulled off the brake cable equalizer. Unplug the rear wheel speed sensors and take away the coil springs. Raise the axle beam with a floor jack until the crossbrace is parallel to the floor, and then loosen the crossbrace-to-rear axle attaching bolts and looseness and detach the crossbrace and rear axle. Remove the clips connecting the rear axle and the brake lines on both sides and unconnect them. Unscrew the rear axle bracket mounting fasteners on the right and only the through-bolt nut on the left, remembering to note the various lengths of the rear axle mounting bracket fasteners to be installed. Take out the rear shock absorber-to-rear axle fasteners and loosen the rear axle of the vehicle. To install, remove in opening sequence, tighten all suspension fasteners that pass through rubber bushings to the required torque at ride height, use new fasteners, do not lighten up the rear axle mounting fasteners until the wheel suspended is raised to simulated ride height, bleed the brakes, and tighten the wheel bolts to the needed torque and have the rear wheel alignment verified and if necessary adjusted.

Genuine Volkswagen Jetta Axle Beam

Rigid Axle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Axle Beams found

View related parts
Volkswagen Jetta Engine Cradle Part Number: 1H0-199-315-AA
$472.75 MSRP: $645.83
You Save: $173.08 (27%)
ADD TO CART
Product Specifications
- Other Name: Sub Frame; Subframe, Suspension Crossmember
- Replaces: 1H0-199-315-J, 1H0-199-315-T, 1H0-199-315-S
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1993-1999 Volkswagen Jetta | Celebration Edition, City, GL, GLS, GLX, GT, Jazz, K2, Limited Edition, TDI, Trek, Wolfsburg Edition | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Jetta Crossmember Part Number: 5QM-505-315-D
$616.09 MSRP: $776.91
You Save: $160.82 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sub Frame; Crossmember, Suspension Crossmember
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2019-2024 Volkswagen Jetta | GLI 35th Anniversary Edition, GLI Autobahn, GLI S, R-Line, S, SE, SEL, SEL Premium, Sport | 4 Cyl 1.4 L GAS, 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Crossmember Part Number: 1K0-505-315-BP
$850.94 MSRP: $1073.07
You Save: $222.13 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sub Frame; Crossmember
- Replaces: 1K0-505-315-BL, 1K0-505-315-AS, 1K0-505-315-BB, 1K0-505-315-BG
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2005-2014 Volkswagen Jetta | 2.0T, 2.5, GL, GL TDI, GLI, GLS, GLS TDI, S, SE, SEL, TDI, TDI Cup Edition, Value Edition, Wolfsburg Edition | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Jetta Crossmember Part Number: 5C0-505-315-L
$939.39 MSRP: $1184.60
You Save: $245.21 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sub Frame; Crossmember, Suspension Crossmember
- Replaces: 5C0-505-315-E, 5C0-505-315-D, 5C0-505-315-H
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2011-2018 Volkswagen Jetta | Base, GLI, GLI SE, GLI SEL, Hybrid, Hybrid SE, Hybrid SEL, Hybrid SEL Premium, S, SE, SE Sport, SEL, SEL Premium, Sport, TDI, TDI Premium, TDI S, TDI SE, TDI SEL, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Jetta Engine Cradle Part Number: 1J0-199-313-M
$942.44 MSRP: $1188.45
You Save: $246.01 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sub Frame; Crossmember, Engine Cradle, Suspension Subframe
- Replaces: 1J0-199-313-F, 1J0-199-313-B, 1J0-199-313-J
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1999-2005 Volkswagen Jetta | GL, GL TDI, GLI, GLS, GLS TDI, GLX, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Jetta Crossmember Part Number: 1J0-500-051-L
$1152.89 MSRP: $1453.84
You Save: $300.95 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Axle; Axle Assembly, Crossmember
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1999-2005 Volkswagen Jetta | GL, GL TDI, GLI, GLS, GLS TDI, GLX, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Jetta Engine Cradle Part Number: 5QM-199-315-A
$1152.89 MSRP: $1453.84
You Save: $300.95 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sub Frame; Crossmember, Engine Cradle, Suspension Crossmember
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2019-2024 Volkswagen Jetta | GLI 35th Anniversary Edition, GLI Autobahn, GLI S, R-Line, S, SE, SEL, SEL Premium, Sport | 4 Cyl 1.4 L GAS, 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Engine Cradle Part Number: 1K0-199-313-AM
$1162.04 MSRP: $1465.37
You Save: $303.33 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sub Frame; Engine Cradle
- Replaces: 1K0-199-313-P
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2005-2014 Volkswagen Jetta | 2.0T, 2.5, GLI, S, SE, SEL, Value Edition, Wolfsburg Edition | 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Jetta Crossmember Part Number: 1J0-500-051-J
$988.20 MSRP: $1246.15
You Save: $257.95 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Axle; Crossmember
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1999-2005 Volkswagen Jetta | GL, GL TDI, GLI, GLS, GLS TDI, GLX, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS

Volkswagen Jetta Axle Beam

Choose OEM Axle Beam for superior quality and long-lasting durability. They match the Volkswagen's factory specifications exactly and pass strict quality control. If you plan to replace Axle Beam on your Jetta, put OEM at the top of your list. You'll get the right fit, reliable performance, and peace of mind. We stock an extensive inventory of genuine Volkswagen Jetta parts. It is easy to find what you need. You will love our competitive prices that help you save. No more hassle with returns or guesswork. Every part includes a warranty straight from the manufacturer. Get trusted quality, strong durability, and real value today.

Volkswagen Jetta Axle Beam Parts and Q&A

Engine Cradle
1K0-199-313-AM
Q: How to remove and install the rear axle beam on Volkswagen Jetta?
A:
Loose the bolts of the rear wheel, raise the rear part of the vehicle and place it firmly on jackstands with the front wheels blocked to avoid rolling. Take off the rear wheels, undo the parking brake and undo the parking brake adjustment nut till the cables may be pulled off the brake cable equalizer. Unplug the rear wheel speed sensors and take away the Coil Springs. Raise the axle beam with a floor jack until the crossbrace is parallel to the floor, and then loosen the crossbrace-to-rear axle attaching bolts and looseness and detach the crossbrace and rear axle. Remove the clips connecting the rear axle and the brake lines on both sides and unconnect them. Unscrew the rear axle bracket mounting fasteners on the right and only the through-bolt nut on the left, remembering to note the various lengths of the rear axle mounting bracket fasteners to be installed. Take out the rear shock absorber-to-rear axle fasteners and loosen the rear axle of the vehicle. To install, remove in opening sequence, tighten all suspension fasteners that pass through rubber bushings to the required torque at ride height, use new fasteners, do not lighten up the rear axle mounting fasteners until the wheel suspended is raised to simulated ride height, bleed the brakes, and tighten the wheel bolts to the needed torque and have the rear wheel alignment verified and if necessary adjusted.