How to replace the blower motor and blower motor resistor on Volkswagen Jetta?

The blower control module is fitted as part of the blower motor and cannot be changed independently. First of all, take the trim panel off of under the glove box by removing the fasteners on the trim panel. The second step is to disconnect the electrical connector with the blower motor. Draw the locking tab of the blower motor downwards, turn the assembly counterclockwise, and pull out the blower motor, it can be important to note that some models can be secured by a retaining screw which must be removed before the housing can turn. To install, unwind the step back process by turning the blower housing until it meets the stop. In order to deal with the blower motor resistor, unconnection of the electrical connector with the resistor, and pushing the locking tab in the direction of the connector terminals to free the resistor. Take out the heater and air conditioning housing blower motor resistor by pushing the tab inwards. Lastly, removal is reversed followed by installation.

Genuine Volkswagen Jetta Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Blower Motor Resistors found

View related parts
Volkswagen Jetta Bracket Part Number: 1J0-819-322
$19.14 MSRP: $31.38
You Save: $12.24 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1999-2005 Volkswagen Jetta | GL, GL TDI, GLI, GLS, GLS TDI, GLX, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Jetta Resistor Part Number: 1K0-959-263-A
$64.25 MSRP: $89.97
You Save: $25.72 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 1K0-959-263, 561-959-263-A, 561-959-263
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2005-2018 Volkswagen Jetta | 2.0T, 2.5, Base, GL, GL TDI, GLI, GLI SE, GLI SEL, GLS, GLS TDI, Hybrid, Hybrid SE, Hybrid SEL, Hybrid SEL Premium, S, SE, SE Sport, SEL, SEL Premium, Sport, TDI, TDI Cup Edition, TDI Premium, TDI S, TDI SE, TDI SEL, Value Edition, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Jetta Resistor Part Number: 1K0-959-263-B
$66.63 MSRP: $93.32
You Save: $26.69 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2016-2018 Volkswagen Jetta | GLI, GLI SE, GLI SEL, Hybrid SEL Premium, S, SE, SE Sport, SEL, SEL Premium, Sport, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Resistor Part Number: 1H0-959-263
$77.34 MSRP: $108.31
You Save: $30.97 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1993-2001 Volkswagen Jetta | Celebration Edition, City, GL, GLS, GLX, GT, Jazz, K2, Limited Edition, TDI, Trek, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Jetta Controller Part Number: 3C0-907-521-G
$250.09 MSRP: $341.65
You Save: $91.56 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator; Blower Motor Resistor, Control Module, Resistor
- Replaces: 3C0-907-521-D, 3C0-907-521-F
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2008-2018 Volkswagen Jetta | Base, GLI, GLI SE, GLI SEL, Hybrid, Hybrid SE, Hybrid SEL, Hybrid SEL Premium, S, SE, SE Sport, SEL, SEL Premium, Sport, TDI, TDI Cup Edition, TDI Premium, TDI S, TDI SE, TDI SEL, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Jetta Resistor Part Number: 8A0-959-263-B
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1993-1995 Volkswagen Jetta | GL, GLS, Limited Edition | 4 Cyl 2.0 L GAS

Volkswagen Jetta Blower Motor Resistor

Choose OEM Blower Motor Resistor for superior quality and long-lasting durability. They match the Volkswagen's factory specifications exactly and pass strict quality control. If you plan to replace Blower Motor Resistor on your Jetta, put OEM at the top of your list. You'll get the right fit, reliable performance, and peace of mind. We stock an extensive inventory of genuine Volkswagen Jetta parts. It is easy to find what you need. You will love our competitive prices that help you save. No more hassle with returns or guesswork. Every part includes a warranty straight from the manufacturer. Get trusted quality, strong durability, and real value today.

Volkswagen Jetta Blower Motor Resistor Parts and Q&A

Resistor
1K0-959-263-A
Q: How to replace the blower motor and blower motor resistor on Volkswagen Jetta?
A:
The blower control module is fitted as part of the blower motor and cannot be changed independently. First of all, take the trim panel off of under the glove box by removing the fasteners on the trim panel. The second step is to disconnect the electrical connector with the blower motor. Draw the locking tab of the blower motor downwards, turn the assembly counterclockwise, and pull out the blower motor, it can be important to note that some models can be secured by a retaining screw which must be removed before the housing can turn. To install, unwind the step back process by turning the blower housing until it meets the stop. In order to deal with the blower motor resistor, unconnection of the electrical connector with the resistor, and pushing the locking tab in the direction of the connector terminals to free the resistor. Take out the heater and air conditioning housing blower motor resistor by pushing the tab inwards. Lastly, removal is reversed followed by installation.