What are the steps involved in removing and reinstalling front and rear bumpers, including considerations for the support beams and electrical components on Volkswagen Jetta?

Front and rear bumpers are made up of fascia or bumper cover and metal structural beam with some minor differences in some models in the sequences of removal. In order to take off the front bumper cover, lift the car and undo the negative battery connection. Unscrew the bottom bumper cover mounting screws and then unscrew the hood from the top to get to the top mounting screws. The fenderwell splash shield has lower section which can be peeled back to reach the fenderwell bumper fasteners on each side. In case of the presence of a front spoiler, dismount its mounting fasteners and pull off the spoiler. With caution, stiffen the edges of the bumper cover at the rear, unclip them of the fenderwell, and draw the grille forward to loosen the retaining tabs at the bottom. Unplug any electrical connectors of the bumper-mounted parts, and then push the bumper assembly out and be careful of the paint and any headlight wiper hoses. Installation is done in the same order but in a reverse manner, to make sure that the alignment occurs, and the parking assist system can require calibration after the installation. In the case of the bumper support beam, take off the bolts joining the beam to the frame and put the beam back by attaching all the fasteners and then tightening them loosely. In the case of the rear bumper cover, first take out the taillight housing fitted into the body, then operate in the rear wheelwells, unscrewing fasteners in the liner and the evaporator canister shield. Take out the lower fasteners, which are under the bumper, release the sides of the bumper cover and release the upper tabs out of the taillight housing recess. Unscrew any electrical connectors that have attached to bumper-mounted parts, and then push the bumper assembly out with care. Removal is the opposite of reinstallation, making sure that everything is properly aligned and then tightened after which the parking assist system may be calibrated as well. In the case of the rear bumper support beam, the bolts attaching it to the frame are removed, where certain models might have brackets to the blind-spot detection system which must be removed before the support beam itself is removed, and then replaced by loosely fitting all the fasteners before tightening.

Genuine Volkswagen Jetta Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

24 Bumpers found

View related parts
Volkswagen Jetta Bumper Cover Part Number: 1J5-807-217-J-GRU
$198.19 MSRP: $277.59
You Save: $79.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1999-2005 Volkswagen Jetta | GL, GL TDI, GLI, GLS, GLS TDI, GLX, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 1K5-807-417-H-GRU
$233.66 MSRP: $327.25
You Save: $93.59 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 1K5-807-417-F-GRU, 1K5-807-417-A-GRU
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2005-2010 Volkswagen Jetta | 2.0T, 2.5, GLI, S, SE, SEL, TDI, TDI Cup Edition, Value Edition, Wolfsburg Edition | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 1K0-807-217-A-GRU
$247.06 MSRP: $337.52
You Save: $90.46 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2005-2010 Volkswagen Jetta | 2.0T, 2.5, GL, GL TDI, GLI, GLS, GLS TDI, S, SE, SEL, TDI, TDI Cup Edition, Value Edition, Wolfsburg Edition | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 1J5-807-417-B-GRU
$249.97 MSRP: $341.48
You Save: $91.51 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1999-2005 Volkswagen Jetta | GL, GL TDI, GLI, GLS, GLS TDI, GLX, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 1K9-807-417-B-GRU
$329.39 MSRP: $449.99
You Save: $120.60 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 1K9-807-417-GRU
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2009-2014 Volkswagen Jetta | S, SE, SEL, TDI | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 17A-807-417-C-GRU
$360.44 MSRP: $492.39
You Save: $131.95 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2019-2021 Volkswagen Jetta | GLI 35th Anniversary Edition, GLI Autobahn, GLI S, R-Line, S, SE, SEL, SEL Premium | 4 Cyl 1.4 L GAS, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 1J9-807-417-GRU
$362.94 MSRP: $495.82
You Save: $132.88 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2001-2002 Volkswagen Jetta | GL, GLS, GLX, TDI | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 5C6-807-421-H-GRU
$326.66 MSRP: $446.25
You Save: $119.59 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 5C6-807-421-F-GRU
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2015-2018 Volkswagen Jetta | Base, GLI, GLI SE, GLI SEL, Hybrid SEL Premium, S, SE, SE Sport, SEL, SEL Premium, Sport, TDI S, TDI SE, TDI SEL, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 5C6-807-417-J-GRU
$357.98 MSRP: $489.04
You Save: $131.06 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover
- Replaces: 5C6-807-417-F-GRU
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2015 Volkswagen Jetta | Base, Hybrid SEL Premium, S, SE, SEL, TDI S, TDI SE, TDI SEL | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 17A-807-417-GRU
$381.74 MSRP: $521.50
You Save: $139.76 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2019-2021 Volkswagen Jetta | GLI 35th Anniversary Edition, GLI Autobahn, GLI S, R-Line, S, SE, SEL, SEL Premium | 4 Cyl 1.4 L GAS, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 5C6-807-418-A-GRU
$395.83 MSRP: $540.75
You Save: $144.92 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2011-2014 Volkswagen Jetta | Base, Hybrid, Hybrid SE, Hybrid SEL, Hybrid SEL Premium, S, SE, SEL, TDI, TDI Premium | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 5C6-807-421-GRU
$415.62 MSRP: $567.79
You Save: $152.17 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2012-2014 Volkswagen Jetta | GLI | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 1J9-807-417-A-GRU
$456.16 MSRP: $623.16
You Save: $167.00 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2003-2005 Volkswagen Jetta | GL, GL TDI, GLS, GLS TDI, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 17A-807-417-K-GRU
$530.69 MSRP: $724.99
You Save: $194.30 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2019-2021 Volkswagen Jetta | GLI 35th Anniversary Edition, GLI Autobahn, GLI S, R-Line, S, SE, SEL, SEL Premium | 4 Cyl 1.4 L GAS, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 5C6-807-417-L-GRU
$600.84 MSRP: $820.82
You Save: $219.98 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2015-2018 Volkswagen Jetta | Base, GLI, GLI SE, GLI SEL, Hybrid SEL Premium, S, SE, SEL, SEL Premium, Sport, TDI SE | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 165-807-417-F-QS1
$127.13 MSRP: $178.05
You Save: $50.92 (29%)
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1985-1989 Volkswagen Jetta | Base, GLI, GLI 16-Valve | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.8 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 1HM-807-417-J-GRU
$199.80 MSRP: $279.81
You Save: $80.01 (29%)
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1993-1999 Volkswagen Jetta | Celebration Edition, City, GL, GLS, GLX, GT, Jazz, K2, TDI, Trek, Wolfsburg Edition | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 165-807-217-D-GD6
$202.45 MSRP: $283.55
You Save: $81.10 (29%)
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1985-1990 Volkswagen Jetta | Base, Carat, GL, GLI, GLI 16-Valve | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 1HM-807-217-D-GRU
$222.70 MSRP: $311.93
You Save: $89.23 (29%)
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1993-1999 Volkswagen Jetta | Celebration Edition, City, GL, GLS, GLX, GT, Jazz, K2, TDI, Trek, Wolfsburg Edition | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Jetta Bumper Cover Part Number: 191-807-217-T-ROH
$222.84 MSRP: $312.10
You Save: $89.26 (29%)
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1990-1992 Volkswagen Jetta | Carat, GL, GLI 16-Valve | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS

| Page 1 of 2 |Next >

1-20 of 24 Results

Volkswagen Jetta Bumper

The first point of protection of the car is the Volkswagen Jetta Bumper, which cushions light impacts for passengers and for crucial parts under the hood. Attached to the ends of your Volkswagen sedan, the metal bar or reinforced cover folds on impact, spreading the energy between steel, aluminum, foam or rubber fillers so that body parts and the radiator hold on the other side. Early versions of the Jetta had bare steel bars, which had a chrome or black finish, whereas the more recent models have molded plastic or rubber skins that cover the beam, give a more refined appearance and come pre-painted. A broken Bumper must be replaced promptly since a damaged construction cannot protect from crashes any more and preserve the luxurious look that should be associated with a Volkswagen. Buyers may choose individual beams, complete kits or rear covers that would provide one additional protective layer and extend the life of the underlying Bumper, absorbing minor hits. An important inter-generational difference is that flexible plastic parking covers are able to spring back after bumping a car, unlike the older rigid steel-style covering, which does not. Nevertheless, whatever the choice, online catalogs can be easily selected by the owner, who only needs to enter the year of the vehicle, compare finishes, and the parts arrive in a few days, keeping their Volkswagen protected and fashionable without the struggle. The system that integrates energy capture, cosmetic refinement, and quick replacement follows; the changing Jetta impact system is still providing secure, everyday security.

Choose OEM Bumper for superior quality and long-lasting durability. They match the Volkswagen's factory specifications exactly and pass strict quality control. If you plan to replace Bumper on your Jetta, put OEM at the top of your list. You'll get the right fit, reliable performance, and peace of mind. We stock an extensive inventory of genuine Volkswagen Jetta parts. It is easy to find what you need. You will love our competitive prices that help you save. No more hassle with returns or guesswork. Every part includes a warranty straight from the manufacturer. Get trusted quality, strong durability, and real value today.

Volkswagen Jetta Bumper Parts and Q&A

Bumper Cover
1K9-807-417-B-GRU
Q: What are the steps involved in removing and reinstalling front and rear bumpers, including considerations for the support beams and electrical components on Volkswagen Jetta?
A:
Front and rear bumpers are made up of fascia or bumper cover and metal structural beam with some minor differences in some models in the sequences of removal. In order to take off the front bumper cover, lift the car and undo the negative battery connection. Unscrew the bottom bumper cover mounting screws and then unscrew the hood from the top to get to the top mounting screws. The fenderwell splash shield has lower section which can be peeled back to reach the fenderwell bumper fasteners on each side. In case of the presence of a front spoiler, dismount its mounting fasteners and pull off the spoiler. With caution, stiffen the edges of the bumper cover at the rear, unclip them of the fenderwell, and draw the grille forward to loosen the retaining tabs at the bottom. Unplug any electrical connectors of the bumper-mounted parts, and then push the bumper assembly out and be careful of the paint and any headlight wiper hoses. Installation is done in the same order but in a reverse manner, to make sure that the alignment occurs, and the parking assist system can require calibration after the installation. In the case of the bumper support beam, take off the bolts joining the beam to the frame and put the beam back by attaching all the fasteners and then tightening them loosely. In the case of the rear bumper cover, first take out the taillight housing fitted into the body, then operate in the rear wheelwells, unscrewing fasteners in the liner and the evaporator canister shield. Take out the lower fasteners, which are under the bumper, release the sides of the bumper cover and release the upper tabs out of the taillight housing recess. Unscrew any electrical connectors that have attached to bumper-mounted parts, and then push the bumper assembly out with care. Removal is the opposite of reinstallation, making sure that everything is properly aligned and then tightened after which the parking assist system may be calibrated as well. In the case of the rear bumper support beam, the bolts attaching it to the frame are removed, where certain models might have brackets to the blind-spot detection system which must be removed before the support beam itself is removed, and then replaced by loosely fitting all the fasteners before tightening.