How to replace the Rack and Pinion Boot and reinstall the tie-rod end on 2007 Volkswagen Rabbit?

Loose lug nuts, put vehicle on jackstands and take off the wheel. Unscrew the tie-rod end and boot clamps and slip off the old boot. Installation of steering rod threads, new boot and clamps, reattaching end of the tie-rod, and finally by attaching wheel and tightening lug nuts complete installation.

Genuine 2007 Volkswagen Rabbit Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rack and Pinion Boots found

View related parts
2007 Volkswagen Rabbit Boot Part Number: 1K0-423-831-B
$19.85 MSRP: $32.54
You Save: $12.69 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cup; Tie Rod Boot
- Replaces: 5C0-423-831, 1K0-423-831-A
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1K0-423-831-B
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
More Info
Fits the following 2007 Volkswagen Rabbit Submodels:
- 2.5, S | 5 Cyl 2.5 L GAS
View related parts
2007 Volkswagen Rabbit Seal Part Number: 1K0-423-187
$2.01 MSRP: $3.30
You Save: $1.29 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Washer; Dust Shield, Gear Assembly Seal
- Replaces: 1K1-423-187
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1K0-423-187
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
More Info
Fits the following 2007 Volkswagen Rabbit Submodels:
- 2.5, S | 5 Cyl 2.5 L GAS

2007 Volkswagen Rabbit Rack and Pinion Boot Parts and Q&A

Q: How to replace the Rack and Pinion Boot and reinstall the tie-rod end on 2007 Volkswagen Rabbit?
A: Loose lug nuts, put vehicle on jackstands and take off the wheel. Unscrew the tie-rod end and boot clamps and slip off the old boot. Installation of steering rod threads, new boot and clamps, reattaching end of the tie-rod, and finally by attaching wheel and tightening lug nuts complete installation.