What precautions should be taken when disconnecting the battery and replacing the radiator and coolant reservoir on 2019 Volkswagen GTI?

When disconnecting the battery, one will have to re-learn about some systems. In order to change the radiator shutter assembly, lift the car, loosen the negative battery cable and empty the cooling system. Take out required parts then remove the radiator. Install The installation is in reverse, make sure to clean expansion tank before it is installed again.

Genuine 2019 Volkswagen GTI Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Coolant Reservoirs found

View related parts
2019 Volkswagen GTI Reservoir Part Number: 5Q0-121-407-M
$59.51 MSRP: $82.65
You Save: $23.14 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank
- Replaced by: 5Q0-121-407-AA
- SKU: 5Q0-121-407-M
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following 2019 Volkswagen GTI Submodels:
- Autobahn, Rabbit Edition, S, SE, Sport | 4 Cyl 2.0 L GAS
View related parts
2019 Volkswagen GTI Reservoir Part Number: 5QM-121-407-C
$31.07 MSRP: $51.78
You Save: $20.71 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank; Expansion Tank, Reservoir
- Item Weight: 27.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5QM-121-407-C
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following 2019 Volkswagen GTI Submodels:
- Autobahn, Rabbit Edition, S, SE | 4 Cyl 2.0 L GAS

2019 Volkswagen GTI Coolant Reservoir Parts and Q&A

Q: What precautions should be taken when disconnecting the battery and replacing the radiator and coolant reservoir on 2019 Volkswagen GTI?
A: When disconnecting the battery, one will have to re-learn about some systems. In order to change the radiator shutter assembly, lift the car, loosen the negative battery cable and empty the cooling system. Take out required parts then remove the radiator. Install The installation is in reverse, make sure to clean expansion tank before it is installed again.