How to remove and install the front wheel bearing and front wheel hub on 2019 Volkswagen GTI?

To install/install the wheel trim, loosen the driveaxle and wheel bolts and put the vehicle on jackstands. Unattach the parts of the brake system, the wheel speed sensor, and the driveaxle/hub bolt. Take off the hub/bearing assembly, making sure that the CV joint does not poke out. Wipe surfaces clean, lubricate and re-fit parts, apply to desired torque.

Genuine 2019 Volkswagen GTI Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Bearings found

View related parts
2019 Volkswagen GTI Hub & Bearing Part Number: 8S0-498-625-A
$62.72 MSRP: $87.85
You Save: $25.13 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing; Front Hub & Bearing, Hub & Bearing
- Replaces: 8V0-498-625-A
- Item Weight: 9.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S0-498-625-A
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
More Info
Fits the following 2019 Volkswagen GTI Submodels:
- Autobahn, Rabbit Edition, S, SE, Sport | 4 Cyl 2.0 L GAS
View related parts
2019 Volkswagen GTI Hub & Bearing Part Number: 5Q0-598-611
$253.14 MSRP: $345.82
You Save: $92.68 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing
- SKU: 5Q0-598-611
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following 2019 Volkswagen GTI Submodels:
- Autobahn, Base, Driver's Edition, Fahrenheit, Rabbit Edition, S, SE, Sport, Wolfsburg Edition | 4 Cyl 2.0 L GAS

2019 Volkswagen GTI Wheel Bearing Parts and Q&A

Q: How to remove and install the front wheel bearing and front wheel hub on 2019 Volkswagen GTI?
A: To install/install the wheel trim, loosen the driveaxle and wheel bolts and put the vehicle on jackstands. Unattach the parts of the brake system, the wheel speed sensor, and the driveaxle/hub bolt. Take off the hub/bearing assembly, making sure that the CV joint does not poke out. Wipe surfaces clean, lubricate and re-fit parts, apply to desired torque.