How to remove the front and rear bumpers on Volkswagen Passat?

All models have front and rear bumpers made of fascia and metal structural beam. In order to take off the front bumper, park the car and put on the parking brake, lift the car safely on jackstands and open the hood. Take the splash shield off underneath the engine, and off each front wheel well, take out the screws holding the edges of the bumper cover. Get the retaining tab out and the lower grilles off the bumper on both sides and, when fitted, the fog lights. Unscrew and loosen the two bumper retaining bolts beneath the car after which the bumper assembly is carefully removed by sliding it off the front side of the car, making sure to pull out any washer hoses should there be headlight wipers. In case the bumper cover is required to be detached of the metal bumper, push pins or screws are to be removed. On Volkswagen Passat vehicles between 1998 and 2001, screws holding the bottom of the bumper cover, the hood latch mechanism, and the front turn signal lights are removed, and the bolt holding the bumper cover in each of the turn signal light slots are removed. Use screws to remove the top of the bumper cover attached to the radiator support panel and remove the bumper. In 2002 and subsequent models, unscrew the upper and lower ends of the bumper cover, then retract the inner fender liner and then feel your way in removing the bumper cover off the alignment guides. In the case of the rear bumper, at the rear of the wheel wells, strip away the screws holding the bumper cover together, in the trunk section, remove the retaining bolts by folding down the floor covering, and removing the screws. The bumper assembly should be carefully removed, and the edges that are adhered should be loosened by hinging the bumper assembly upwards. The bumper support brackets are removable by removing the screw mounts. In VW Passat wagons and 1998-2001 sedan models, to remove the cover of the bumper, raise the rear of the vehicle, then take the screws that hold the bottom of the bumper cover of the vehicle, and open the trunk to remove the cover. Take out the bolts that hold the metal bumper on the support brackets. In 2002 and subsequent sedan models, loosen the bolts around the bottom of the bumper cover, the bolts at each end of the front, and the taillight housings, and then slide the bumper cover off the alignment guides. Removal is the opposite of installation, in which all the retaining bolts and screws are loosely fitted and then tightened completely.

Genuine Volkswagen Passat Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

42 Bumpers found

View related parts
Volkswagen Passat Bumper Cover Part Number: 561-807-421-K-GRU
$321.84 MSRP: $439.67
You Save: $117.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2016-2019 Volkswagen Passat | GT, R-Line, S, SE, SE R-Line, SEL, SEL Premium, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 561-807-217-B-GRU
$337.39 MSRP: $460.91
You Save: $123.52 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 561-807-217-A-GRU
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2012-2015 Volkswagen Passat | Limited Edition, S, SE, SEL, SEL Premium, Sport, TDI SE, TDI SEL, TDI SEL Premium, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 5 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 3B0-807-217-M-GRU
$345.49 MSRP: $471.98
You Save: $126.49 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2001-2005 Volkswagen Passat | GL, GL TDI, GLS, GLS 4 Motion, GLS TDI, GLX, GLX 4 Motion, W8 | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 6 Cyl 2.8 L GAS, 8 Cyl 4.0 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 561-807-217-D-GRU
$363.38 MSRP: $496.43
You Save: $133.05 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2016-2019 Volkswagen Passat | GT, R-Line, S, SE, SE R-Line, SEL, SEL Premium, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 561-807-421-E-GRU
$397.13 MSRP: $542.54
You Save: $145.41 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 561-807-421-A-GRU
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2012-2015 Volkswagen Passat | Limited Edition, S, SE, SEL, SEL Premium, Sport, TDI SE, TDI SEL, TDI SEL Premium, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 5 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 3B5-807-417-J-GRU
$395.94 MSRP: $540.90
You Save: $144.96 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2002-2004 Volkswagen Passat | W8 | 8 Cyl 4.0 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 3C5-807-417-AK-GRU
$398.57 MSRP: $544.50
You Save: $145.93 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 3C5-807-417-J-GRU
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2006-2008 Volkswagen Passat | 2.0T, 3.6, Komfort, Lux, Turbo, Value Edition, VR6, Wolfsburg Edition | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 561-807-421-D-GRU
$428.27 MSRP: $585.06
You Save: $156.79 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover
- Replaces: 561-807-421-GRU
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2012-2015 Volkswagen Passat | Limited Edition, S, SE, SEL, SEL Premium, Sport, TDI SE, TDI SEL, TDI SEL Premium, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 5 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 3B9-807-417-C-GRU
$408.19 MSRP: $557.63
You Save: $149.44 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2002-2004 Volkswagen Passat | W8 | 8 Cyl 4.0 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 3B0-807-217-GRU
$484.94 MSRP: $662.49
You Save: $177.55 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1998-2001 Volkswagen Passat | 4 Motion, GLS, GLS 4 Motion, GLX, GLX 4 Motion | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 3B9-807-417-GRU
$434.72 MSRP: $593.88
You Save: $159.16 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1998-2001 Volkswagen Passat | 4 Motion, GLS, GLS 4 Motion, GLX, GLX 4 Motion | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 561-807-217-H-GRU
$494.09 MSRP: $674.99
You Save: $180.90 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2016-2019 Volkswagen Passat | GT, R-Line, S, SE, SE R-Line, SEL, SEL Premium, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 3B5-807-417-GRU
$439.66 MSRP: $600.65
You Save: $160.99 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1998-2001 Volkswagen Passat | 4 Motion, GLS, GLS 4 Motion, GLX, GLX 4 Motion | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 3B5-807-417-H-GRU
$440.85 MSRP: $602.27
You Save: $161.42 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 3B5-807-417-E-GRU
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2001-2005 Volkswagen Passat | GL, GL TDI, GLS, GLS 4 Motion, GLS TDI, GLX, GLX 4 Motion | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 3C5-807-417-H-GRU
$476.31 MSRP: $650.71
You Save: $174.40 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2006-2010 Volkswagen Passat | 2.0T, 3.6, Komfort, Lux, Turbo, Value Edition, VR6, Wolfsburg Edition | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 3B9-807-417-B-GRU
$478.51 MSRP: $653.66
You Save: $175.15 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2001-2005 Volkswagen Passat | GL, GL TDI, GLS, GLS 4 Motion, GLS TDI, GLX, GLX 4 Motion | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 3B0-807-217-N-GRU
$489.15 MSRP: $668.24
You Save: $179.09 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2002-2004 Volkswagen Passat | GL, GL TDI, GLS, GLS 4 Motion, GLS TDI, GLX, GLX 4 Motion, W8 | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 6 Cyl 2.8 L GAS, 8 Cyl 4.0 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 3C9-807-417-GRU
$541.94 MSRP: $740.36
You Save: $198.42 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2007-2010 Volkswagen Passat | 2.0T, 3.6, Komfort, Lux, Turbo, Value Edition, VR6 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 3C9-807-417-E-GRU
$603.89 MSRP: $824.99
You Save: $221.10 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 3C9-807-417-A-GRU
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2007-2008 Volkswagen Passat | 2.0T, 3.6, Komfort, Lux, Turbo, Value Edition, VR6 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bumper Cover Part Number: 561-807-421-L-GRU
$712.43 MSRP: $973.27
You Save: $260.84 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2020-2022 Volkswagen Passat | Limited Edition, R-Line, S, SE, SEL | 4 Cyl 2.0 L GAS

| Page 1 of 3 |Next >

1-20 of 42 Results

Volkswagen Passat Bumper

The Volkswagen Passat Bumper is the first line of defense in a daily fender tap of the car, acting as a shock absorber to protect the passengers in the car as well as other important hardware components such as the engine and radiator while still ensuring the sedan is well maintained. Assembled in the form of metal bars covered with a plastic outer shell that can contain foam or honeycomb energy absorbers, the assembly is installed at the front and rear ends of the vehicle to ensure that minor knocks are scattered before hitting the body. The midsize Volkswagen has two predominant styles, which it has been sporting over a number of model years. The first editions applied simple steel beams that were tough but added to the weight, but the subsequent generations of Volkswagen applied lightweight plastic-coated versions capable of bending and springing with little scratches, leading to fewer visible scratches and benefiting aerodynamics. Customers may continue to purchase either front or rear units individually, or purchase entire kits comprising brackets and hardware that fit together. There are chrome and textured black options in terms of color as well, and most of the pieces are sent in a primed state, allowing the owner to paint them to a factory finish. Other parts include a front spoiler, a lower panel that fits under the main Bumper to smooth out airflow and give a sports appearance. When a Bumper is dented, replacement will restore the Volkswagen's structural integrity and occupant safety and will transform the Passat's appearance without the use of complex tools.

Choose OEM Bumper for superior quality and long-lasting durability. They match the Volkswagen's factory specifications exactly and pass strict quality control. If you plan to replace Bumper on your Passat, put OEM at the top of your list. You'll get the right fit, reliable performance, and peace of mind. We stock an extensive inventory of genuine Volkswagen Passat parts. It is easy to find what you need. You will love our competitive prices that help you save. No more hassle with returns or guesswork. Every part includes a warranty straight from the manufacturer. Get trusted quality, strong durability, and real value today.

Volkswagen Passat Bumper Parts and Q&A

Bumper Cover
3B0-807-217-GRU
Q: How to remove the front and rear bumpers on Volkswagen Passat?
A:
All models have front and rear bumpers made of fascia and metal structural beam. In order to take off the front bumper, park the car and put on the parking brake, lift the car safely on jackstands and open the hood. Take the splash shield off underneath the engine, and off each front wheel well, take out the screws holding the edges of the bumper cover. Get the retaining tab out and the lower grilles off the bumper on both sides and, when fitted, the fog lights. Unscrew and loosen the two bumper retaining bolts beneath the car after which the bumper assembly is carefully removed by sliding it off the front side of the car, making sure to pull out any washer hoses should there be headlight wipers. In case the bumper cover is required to be detached of the metal bumper, push pins or screws are to be removed. On Volkswagen Passat vehicles between 1998 and 2001, screws holding the bottom of the bumper cover, the Hood Latch mechanism, and the front turn signal lights are removed, and the bolt holding the bumper cover in each of the turn signal light slots are removed. Use screws to remove the top of the bumper cover attached to the radiator support panel and remove the bumper. In 2002 and subsequent models, unscrew the upper and lower ends of the bumper cover, then retract the inner fender liner and then feel your way in removing the bumper cover off the alignment guides. In the case of the rear bumper, at the rear of the wheel wells, strip away the screws holding the bumper cover together, in the trunk section, remove the retaining bolts by folding down the floor covering, and removing the screws. The bumper assembly should be carefully removed, and the edges that are adhered should be loosened by hinging the bumper assembly upwards. The bumper support brackets are removable by removing the screw mounts. In VW Passat wagons and 1998-2001 sedan models, to remove the cover of the bumper, raise the rear of the vehicle, then take the screws that hold the bottom of the bumper cover of the vehicle, and open the trunk to remove the cover. Take out the bolts that hold the metal bumper on the support brackets. In 2002 and subsequent sedan models, loosen the bolts around the bottom of the bumper cover, the bolts at each end of the front, and the taillight housings, and then slide the bumper cover off the alignment guides. Removal is the opposite of installation, in which all the retaining bolts and screws are loosely fitted and then tightened completely.