How to remove and install the front crankshaft seal and front oil seal on the crankshaft sprocket on 2003 Volkswagen Passat?

Take off the timing belt and crankshaft sprocker, and pry out the front seal, but not the housing. Wipe out the bore, grease the new seal with oil and push it in firmly. Clean surfaces prior to the use of RTV sealant and the reinstatement of parts. After running, inspect the engine with regard to oil leaks.

Genuine 2003 Volkswagen Passat Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2003 Volkswagen Passat Crank Seal Part Number: 068-103-085-E
$20.12 MSRP: $32.98
You Save: $12.86 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal; Front Seal
- Replaces: 068-103-085-A, 026-103-085-E, 026-103-085-F
- Item Weight: 0.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 068-103-085-E
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
More Info
Fits the following 2003 Volkswagen Passat Submodels:
- 4 Motion, CL, GL, GLS, GLS 4 Motion, GLX, GLX 4 Motion, W8 | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 4.0 L GAS
View related parts
2003 Volkswagen Passat Rear Main Seal Part Number: 021-103-051-C
$126.13 MSRP: $176.65
You Save: $50.52 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal; Front Seal, Rear Main Seal
- Position: Front
- Replaces: 021-103-051
- Item Weight: 0.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 021-103-051-C
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
More Info
Fits the following 2003 Volkswagen Passat Submodels:
- 3.6, GT, SE, SEL Premium, VR6, W8 | 6 Cyl 3.6 L GAS, 8 Cyl 4.0 L GAS

2003 Volkswagen Passat Crankshaft Seal Parts and Q&A

Q: How to remove and install the front crankshaft seal and front oil seal on the crankshaft sprocket on 2003 Volkswagen Passat?
A: Take off the timing belt and crankshaft sprocker, and pry out the front seal, but not the housing. Wipe out the bore, grease the new seal with oil and push it in firmly. Clean surfaces prior to the use of RTV sealant and the reinstatement of parts. After running, inspect the engine with regard to oil leaks.