How to replace the lift support and trunk lid latch for sedan on 2019 Volkswagen GTI?

In models that have an inbuilt trunk lock cylinder, the entire latch unit should be replaced. Unscrew the trunk, unscrew the negative battery cable and the inner trim panel. Unscrew the electrical connector of the latch and label its position and remove the connector. Repeat the same with support struts and release switch.

Genuine 2019 Volkswagen GTI Lift Support

Lift Support Shocks

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Lift Supports found

View related parts
2019 Volkswagen GTI Lift Cylinder Part Number: 5GM-823-359-A
$12.96 MSRP: $21.24
You Save: $8.28 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder, Support Cylinder
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GM-823-359-A
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following 2019 Volkswagen GTI Submodels:
- Autobahn, Rabbit Edition, S, SE | 4 Cyl 2.0 L GAS
View related parts
2019 Volkswagen GTI Strut Part Number: 5GM-827-550-B
$46.43 MSRP: $64.47
You Save: $18.04 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder, Strut
- Replaces: 5GM-827-550
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GM-827-550-B
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
More Info
Fits the following 2019 Volkswagen GTI Submodels:
- Autobahn, Rabbit Edition, S, SE, Sport | 4 Cyl 2.0 L GAS

2019 Volkswagen GTI Lift Support Parts and Q&A

Q: How to replace the lift support and trunk lid latch for sedan on 2019 Volkswagen GTI?
A: In models that have an inbuilt trunk lock cylinder, the entire latch unit should be replaced. Unscrew the trunk, unscrew the negative battery cable and the inner trim panel. Unscrew the electrical connector of the latch and label its position and remove the connector. Repeat the same with support struts and release switch.