How to replace the lift support and trunk lid latch integrated into the latch release actuator for coupe and wagon on Volkswagen GTI?

On models that have a liftgate lock cylinder that is built into the latch release actuator, the whole component cannot be replaced individually and it has to be replaced. The first thing to do is to open the liftgate and unplug the cable in the negative battery terminal and then remove the trim panel. In the case of a lock that fails, the liftgate may be manually unlocked using the emergency access lever that is located inside the car and possibly requires removal of a trim panel to access. Then, loosen up the wiring on the latch, strip it, and detach the latch out of the liftgate, and it is the same process when putting it back. Should it ever be necessary and may prevent access, then remove the tailgate wiper motor, followed by unloading the wiring of the handle/release unit. Take out the holding fasteners that hold the unit to the liftgate and locking brackets, then swing the unit clockwise to take it out and loose the drain hose (when present). Reinstatement is done in the same sequence as the removal is done keeping in mind to verify the functionality of the lock components before installing the trim panel once again. The liftgate support struts are taken off on all the models just like the hood support struts.

Genuine Volkswagen GTI Lift Support

Lift Support Shocks

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Lift Supports found

View related parts
Volkswagen GTI Lift Cylinder Part Number: 5GM-823-359
$35.84 MSRP: $59.73
You Save: $23.89 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2015-2017 Volkswagen GTI | Autobahn, S, SE, Sport | 4 Cyl 2.0 L GAS
View related parts
Volkswagen GTI Strut Part Number: 1K6-827-550-F
$37.84 MSRP: $52.54
You Save: $14.70 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Strut
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2006-2009 Volkswagen GTI | Base, Fahrenheit | 4 Cyl 2.0 L GAS
View related parts
Volkswagen GTI Strut Part Number: 5K6-827-550-D
$37.84 MSRP: $52.54
You Save: $14.70 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2010-2014 Volkswagen GTI | Base, Driver's Edition, Wolfsburg Edition | 4 Cyl 2.0 L GAS
View related parts
Volkswagen GTI Lift Cylinder Part Number: 5GM-823-359-A
$12.96 MSRP: $21.24
You Save: $8.28 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder, Support Cylinder
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2018-2021 Volkswagen GTI | Autobahn, Rabbit Edition, S, SE | 4 Cyl 2.0 L GAS
View related parts
Volkswagen GTI Lift Cylinder Part Number: 1K0-823-359-A
$26.32 MSRP: $43.85
You Save: $17.53 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2006-2009 Volkswagen GTI | Base, Fahrenheit | 4 Cyl 2.0 L GAS
View related parts
Volkswagen GTI Strut Part Number: 5GM-827-550-B
$46.43 MSRP: $64.47
You Save: $18.04 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder, Strut
- Replaces: 5GM-827-550
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2015-2021 Volkswagen GTI | Autobahn, Rabbit Edition, S, SE, Sport | 4 Cyl 2.0 L GAS
View related parts
Volkswagen GTI Strut Part Number: 5H6-827-550-K
$53.57 MSRP: $74.40
You Save: $20.83 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2022-2024 Volkswagen GTI | 40th Anniversary Edition, Autobahn, S, SE | 4 Cyl 2.0 L GAS
View related parts
Volkswagen GTI Lift Cylinder Part Number: 5K0-823-359-E
$58.74 MSRP: $81.57
You Save: $22.83 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder, Support Cylinder
- Replaces: 5K0-823-359-D
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2010-2014 Volkswagen GTI | Base, Driver's Edition, Wolfsburg Edition | 4 Cyl 2.0 L GAS

Volkswagen GTI Lift Support

Choose OEM Lift Support for superior quality and long-lasting durability. They match the Volkswagen's factory specifications exactly and pass strict quality control. If you plan to replace Lift Support on your GTI, put OEM at the top of your list. You'll get the right fit, reliable performance, and peace of mind. We stock an extensive inventory of genuine Volkswagen GTI parts. It is easy to find what you need. You will love our competitive prices that help you save. No more hassle with returns or guesswork. Every part includes a warranty straight from the manufacturer. Get trusted quality, strong durability, and real value today.

Volkswagen GTI Lift Support Parts and Q&A

Lift Cylinder
5GM-823-359
Q: How to replace the lift support and trunk lid latch integrated into the latch release actuator for coupe and wagon on Volkswagen GTI?
A:
On models that have a liftgate lock cylinder that is built into the latch release actuator, the whole component cannot be replaced individually and it has to be replaced. The first thing to do is to open the liftgate and unplug the cable in the negative battery terminal and then remove the trim panel. In the case of a lock that fails, the liftgate may be manually unlocked using the emergency access lever that is located inside the car and possibly requires removal of a trim panel to access. Then, loosen up the wiring on the latch, strip it, and detach the latch out of the liftgate, and it is the same process when putting it back. Should it ever be necessary and may prevent access, then remove the tailgate wiper motor, followed by unloading the wiring of the handle/release unit. Take out the holding fasteners that hold the unit to the liftgate and locking brackets, then swing the unit clockwise to take it out and loose the drain hose (when present). Reinstatement is done in the same sequence as the removal is done keeping in mind to verify the functionality of the lock components before installing the trim panel once again. The liftgate support struts are taken off on all the models just like the hood support struts.