What steps should be taken prior to removing the piston and connecting rod assemblies on Volkswagen Jetta?

Before the removal of the piston and connecting rod, make sure that you remove the cylinder head, oil pans, oil pump, and windage tray provided. Test the ridges on the top of the ring movement with a fingernail, and in case there are any, clean with a ridge reamer as directed by the manufacturers not to break the piston. Once the ridges have been removed, position the engine in such a way that the crankshaft is facing upward. Test the connecting rod endplay by feeler gauges and it should be within the service range of 0.005 to 0.015 inch; otherwise replacement of connecting rods might be required. Locate connecting rods and caps by making sure that marks are focused to drivebelt end and are marked. Bend connecting rod cap bolt progressively enough to be able to loosen it with a hand until it is clear enough to remove the old one to check the oil clearance. Install Take off first connecting rod cap and bearing insert, but do not drop the bearing insert, and force the connecting rod/piston assembly out with a wooden or plastic hammer handle. Check on other cylinders, reassemble caps and inserts and avoid damaging them. In case of piston ring installation, check ring end gaps, make sure that they are within specified limits and make the necessary adjustment. Install the oil control ring with the middle and top rings on top of it keeping in mind the proper direction. Wipe down cylinder walls and chamfer edges before assemblies have been installed and make sure that the crankshaft is in place. Install new bearing inserts, not lubricated, and make sure that they fit. Intervals between position piston rings are 90 degrees between, lubricate the piston and rings, and install with a ring compressor. Test oil clearance between check connecting rod and Plastigage and replace bearings where necessary. Once installed, remove any residues of Plastigage, apply grease to bearing faces and install new bolts, tightening in stages. Repeat on the rest of the assemblies keeping them clean and in a proper orientation. Last, turn the crankshaft to ensure it does not bind and check endplay of the connecting rods; remedies to any problem to be made.

Genuine Volkswagen Jetta Piston

Engine Pistons

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

31 Pistons found

View related parts
Volkswagen Jetta Piston Part Number: 03L-107-065-N-001
$168.55 MSRP: $236.07
You Save: $67.52 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2010-2014 Volkswagen Jetta | TDI, TDI Premium | 4 Cyl 2.0 L DIESEL
View related parts
Volkswagen Jetta Pistons Part Number: 037-107-065-M
$128.52 MSRP: $180.00
You Save: $51.48 (29%)
ADD TO CART
Product Specifications
- Other Name: Piston; Pistons
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1993-1997 Volkswagen Jetta | Celebration Edition, City, GL, GLS, GT, Jazz, Limited Edition, Trek, Wolfsburg Edition | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Piston Part Number: 07K-107-065-F
$167.78 MSRP: $234.98
You Save: $67.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 07K-107-065-B
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2005-2014 Volkswagen Jetta | 2.5, S, SE, SEL, Value Edition, Wolfsburg Edition | 5 Cyl 2.5 L GAS
View related parts
Volkswagen Jetta Pistons Part Number: 049-107-065-AD
$179.21 MSRP: $251.00
You Save: $71.79 (29%)
ADD TO CART
Product Specifications
- Other Name: Piston
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1984 Volkswagen Jetta | Base, GL, GLI | 4 Cyl 1.7 L GAS
View related parts
Volkswagen Jetta Pistons Part Number: 026-107-065-Q
$202.78 MSRP: $284.00
You Save: $81.22 (29%)
ADD TO CART
Product Specifications
- Other Name: Piston
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1984-1989 Volkswagen Jetta | Base, Carat, GL, GLI, Wolfsburg Edition | 4 Cyl 1.8 L GAS
View related parts
Volkswagen Jetta Piston Part Number: 06K-107-065-BS
$263.26 MSRP: $359.65
You Save: $96.39 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2019-2023 Volkswagen Jetta | GLI 35th Anniversary Edition, GLI Autobahn, GLI S | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Piston Part Number: 071-107-065-C
$208.25 MSRP: $291.67
You Save: $83.42 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 071-107-065-B
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1995-2002 Volkswagen Jetta | GLI, GLS, GLX | 6 Cyl 2.8 L GAS
View related parts
Volkswagen Jetta Pistons Part Number: 026-107-065-R
$214.20 MSRP: $300.00
You Save: $85.80 (29%)
ADD TO CART
Product Specifications
- Other Name: Piston
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1990-1992, 1985-1987 Volkswagen Jetta | Carat, GL, GLI | 4 Cyl 1.8 L GAS
View related parts
Volkswagen Jetta Pistons Part Number: 06A-107-065-F
$226.10 MSRP: $316.67
You Save: $90.57 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston; Pistons
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2000-2001 Volkswagen Jetta | GL, GLS | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Pistons Part Number: 06A-107-065-AE
$246.44 MSRP: $336.67
You Save: $90.23 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Piston; Pistons
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2001-2003 Volkswagen Jetta | GL, GLS | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Pistons Part Number: 027-107-065
$255.86 MSRP: $349.53
You Save: $93.67 (27%)
ADD TO CART
Product Specifications
- Other Name: Piston
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1987-1989 Volkswagen Jetta | GLI 16-Valve | 4 Cyl 1.8 L GAS
View related parts
Volkswagen Jetta Pistons Part Number: 053-107-065-F
$255.86 MSRP: $349.53
You Save: $93.67 (27%)
ADD TO CART
Product Specifications
- Other Name: Piston
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1991-1993 Volkswagen Jetta | Carat, GL, GLI 16-Valve | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Piston Part Number: 068-107-065-AQ-001
$260.59 MSRP: $356.00
You Save: $95.41 (27%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1991-1992 Volkswagen Jetta | GL | 4 Cyl 1.6 L DIESEL
View related parts
Volkswagen Jetta Piston Part Number: 068-107-065-BA-001
$260.59 MSRP: $356.00
You Save: $95.41 (27%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1984-1986 Volkswagen Jetta | Base, GL | 4 Cyl 1.6 L DIESEL
View related parts
Volkswagen Jetta Piston Part Number: 037-107-065-N
$278.16 MSRP: $380.00
You Save: $101.84 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1998-1999 Volkswagen Jetta | GL, GLS, GT, K2, Wolfsburg Edition | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Jetta Piston Part Number: 038-107-065-GQ-001
$295.24 MSRP: $403.33
You Save: $108.09 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2004-2005 Volkswagen Jetta | GL TDI, GLS TDI, TDI | 4 Cyl 1.9 L DIESEL
View related parts
Volkswagen Jetta Piston Part Number: 038-107-065-GR-001
$295.24 MSRP: $403.33
You Save: $108.09 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2004-2005 Volkswagen Jetta | GL TDI, GLS TDI, TDI | 4 Cyl 1.9 L DIESEL
View related parts
Volkswagen Jetta Piston Part Number: 068-107-065-BC-003
$314.83 MSRP: $430.10
You Save: $115.27 (27%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1984-1986 Volkswagen Jetta | Base, GL | 4 Cyl 1.6 L DIESEL
View related parts
Volkswagen Jetta Piston Part Number: 04E-107-065-GF
$350.74 MSRP: $479.15
You Save: $128.41 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 04E-107-065-AN
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2013-2016 Volkswagen Jetta | Hybrid, Hybrid SE, Hybrid SEL, Hybrid SEL Premium | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Volkswagen Jetta Piston Part Number: 04E-107-065-GN
$350.74 MSRP: $479.15
You Save: $128.41 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2016-2018 Volkswagen Jetta | Hybrid SEL Premium, S, SE, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS

| Page 1 of 2 |Next >

1-20 of 31 Results

Volkswagen Jetta Piston

Choose OEM Piston for superior quality and long-lasting durability. They match the Volkswagen's factory specifications exactly and pass strict quality control. If you plan to replace Piston on your Jetta, put OEM at the top of your list. You'll get the right fit, reliable performance, and peace of mind. We stock an extensive inventory of genuine Volkswagen Jetta parts. It is easy to find what you need. You will love our competitive prices that help you save. No more hassle with returns or guesswork. Every part includes a warranty straight from the manufacturer. Get trusted quality, strong durability, and real value today.

Volkswagen Jetta Piston Parts and Q&A

Piston
03L-107-065-N-001
Q: What steps should be taken prior to removing the piston and connecting rod assemblies on Volkswagen Jetta?
A:
Before the removal of the piston and connecting rod, make sure that you remove the cylinder head, Oil Pans, Oil Pump, and windage tray provided. Test the ridges on the top of the ring movement with a fingernail, and in case there are any, clean with a ridge reamer as directed by the manufacturers not to break the piston. Once the ridges have been removed, position the engine in such a way that the Crankshaft is facing upward. Test the connecting rod endplay by feeler gauges and it should be within the service range of 0.005 to 0.015 inch; otherwise replacement of connecting rods might be required. Locate connecting rods and caps by making sure that marks are focused to drivebelt end and are marked. Bend connecting rod cap bolt progressively enough to be able to loosen it with a hand until it is clear enough to remove the old one to check the oil clearance. Install Take off first connecting rod cap and bearing insert, but do not drop the bearing insert, and force the connecting rod/piston assembly out with a wooden or plastic hammer handle. Check on other cylinders, reassemble caps and inserts and avoid damaging them. In case of piston ring installation, check ring end gaps, make sure that they are within specified limits and make the necessary adjustment. Install the oil control ring with the middle and top rings on top of it keeping in mind the proper direction. Wipe down cylinder walls and chamfer edges before assemblies have been installed and make sure that the crankshaft is in place. Install new bearing inserts, not lubricated, and make sure that they fit. Intervals between position piston rings are 90 degrees between, lubricate the piston and rings, and install with a ring compressor. Test oil clearance between check connecting rod and Plastigage and replace bearings where necessary. Once installed, remove any residues of Plastigage, apply grease to bearing faces and install new bolts, tightening in stages. Repeat on the rest of the assemblies keeping them clean and in a proper orientation. Last, turn the crankshaft to ensure it does not bind and check endplay of the connecting rods; remedies to any problem to be made.