How to remove and replace the front sway bar and front sway bar bushing and its components on Volkswagen Passat?

Lift the front of the car and place it firmly on jackstands and then take off the under-vehicle splash shield. Connect the stabilizer bar links to the stabilizer bar by loosening the nuts, and removing the nut and bolt holding the link to the bar (and removing bolt B in the event of removing the control arm). The initial models might demand the total removal of the connection between the control arm and the link. Then, take the nuts out and loosen the stabilizer bar bushing clamps on the subframe and lastly face out the stabilizer bar, unbolstering the links of the control arms as needed. Check the clamps bushings and link bushings, to see whether they have any cracks, hardening, or wear, and replace when necessary. Lastly, install the parts in the order of their removal with all the fasteners tightened at the required torque.

How to replace the rear Sway Bar and rear Sway Bar Bushing on Volkswagen Passat?

In 2WD models, the rear stabilizer bar extends along the axle beam length and is part and parcel of the axle assembly and therefore cannot be removed, damaged in any way and will force replacement of the complete axle assembly. In all-wheel drives, one should first loosen the rear wheel bolts, raise the rear of the vehicle and support it safely on jack stands without rolling the front wheels. Then take off the rear wheels, then unscrew the nuts of the stabilizer bar connections, and detach the connections of the bar and the links. Then loosen the stabilizer bar with the help of stabilizer bar clamp nuts and bolts. Check the stabilizer bar bushings and link bushings, looking at them with respect to cracks, tears, or any other sign of wear, replacing where necessary, and inspecting the ball studs at the end of the links at the same time, replacing the links as necessary. The installation process is in the opposite sequence of the unloading sequence and in this process all the fasteners are tightened to the required torque and the last step is to tighten the wheel bolts to the required torque.

Genuine Volkswagen Passat Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Sway Bar Bushings found

View related parts
Volkswagen Passat Bushings Part Number: 8D0-511-327-D
$11.09 MSRP: $18.19
You Save: $7.10 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mounting; Bushing
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1999-2005 Volkswagen Passat | 4 Motion, GL, GLS, GLS 4 Motion, GLX, GLX 4 Motion, W8 | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 4.0 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 1K0-511-327-AP
$12.92 MSRP: $21.18
You Save: $8.26 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mounting; Bushing
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2012-2015, 2006-2007 Volkswagen Passat | 2.0T, 3.6, Limited Edition, S, SE, SEL, SEL Premium, Sport, TDI SE, TDI SEL, TDI SEL Premium, Value Edition, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 1K0-511-327-AQ
$12.92 MSRP: $21.18
You Save: $8.26 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mounting; Bushing
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2018-2022 Volkswagen Passat | GT, Limited Edition, R-Line, S, SE, SE R-Line, SEL, SEL Premium, Wolfsburg Edition | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 1K0-511-327-AR
$12.92 MSRP: $21.18
You Save: $8.26 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mounting; Bushing
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2016-2022, 2006-2010 Volkswagen Passat | 2.0T, 3.6, GT, Komfort, Limited Edition, Lux, R-Line, S, SE, SE R-Line, SEL, SEL Premium, Turbo, Value Edition, VR6, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 3B7-511-327
$22.08 MSRP: $36.20
You Save: $14.12 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mounting; Bushing
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2002-2004 Volkswagen Passat | W8 | 8 Cyl 4.0 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 4D0-411-327-H
$13.29 MSRP: $21.77
You Save: $8.48 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mounting
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1998-2005 Volkswagen Passat | 4 Motion, GL, GL TDI, GLS, GLS 4 Motion, GLS TDI, GLX, GLX 4 Motion, W8 | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 6 Cyl 2.8 L GAS, 8 Cyl 4.0 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 3C0-199-867-B
$69.96 MSRP: $97.99
You Save: $28.03 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mount; Bushing
- Position: Lower
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2006-2008 Volkswagen Passat | 2.0T, Komfort, Lux, Turbo, Value Edition, Wolfsburg Edition | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 3C0-199-867-C
$69.96 MSRP: $97.99
You Save: $28.03 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mount; Bushing
- Position: Lower
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2006-2008 Volkswagen Passat | 3.6, VR6 | 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 3C0-199-867-D
$69.96 MSRP: $97.99
You Save: $28.03 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mount; Bushing
- Position: Lower
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2006-2008 Volkswagen Passat | 3.6, VR6 | 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 3C0-199-868-B
$69.96 MSRP: $97.99
You Save: $28.03 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mount; Bushing
- Position: Upper
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2006-2008 Volkswagen Passat | 2.0T, Komfort, Lux, Turbo, Value Edition, Wolfsburg Edition | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 3C0-199-868-C
$69.96 MSRP: $97.99
You Save: $28.03 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mount; Bushing
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2006-2008 Volkswagen Passat | 3.6, VR6 | 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 3C0-199-868-D
$9.60 MSRP: $15.73
You Save: $6.13 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mount; Bushing
- Position: Upper
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2006-2008 Volkswagen Passat | 3.6, VR6 | 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 1K0-199-867-Q
$72.46 MSRP: $101.49
You Save: $29.03 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mount; Bushing, Engine Cradle Lower Insulator
- Position: Lower
- Replaces: 1K0-199-867-B, 1K0-199-867, 1K0-199-867-A, 1K0-199-867-P
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2009-2010 Volkswagen Passat | Komfort | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 1K0-199-868-Q
$72.46 MSRP: $101.49
You Save: $29.03 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rubber Mount; Bushing, Engine Cradle Upper Insulator
- Position: Upper
- Replaces: 1K0-199-868, 1K0-199-868-C, 1K0-199-868-A, 1K0-199-868-P
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2006-2010 Volkswagen Passat | 3.6, Komfort, VR6 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Stabilizer Bar Bushing Part Number: 171-511-413
$8.32 MSRP: $13.64
You Save: $5.32 (39%)
ADD TO CART
Product Specifications
- Other Name: Mounting; Inner Bushing, Stabilizer Bar Bushing
- Position: Center
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1990-1993 Volkswagen Passat | CL, GL, GLX | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 357-411-313-A
$7.75 MSRP: $12.70
You Save: $4.95 (39%)
ADD TO CART
Product Specifications
- Other Name: Mounting; Bushing
- Position: Left
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1990-1997 Volkswagen Passat | CL, GL, GLS, GLX, TDI | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Passat Bushings Part Number: 357-411-314-A
$10.52 MSRP: $17.24
You Save: $6.72 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mounting; Bushing
- Position: Right
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1990-1997 Volkswagen Passat | CL, GL, GLS, GLX, TDI | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS

Volkswagen Passat Sway Bar Bushing

Choose OEM Sway Bar Bushing for superior quality and long-lasting durability. They match the Volkswagen's factory specifications exactly and pass strict quality control. If you plan to replace Sway Bar Bushing on your Passat, put OEM at the top of your list. You'll get the right fit, reliable performance, and peace of mind. We stock an extensive inventory of genuine Volkswagen Passat parts. It is easy to find what you need. You will love our competitive prices that help you save. No more hassle with returns or guesswork. Every part includes a warranty straight from the manufacturer. Get trusted quality, strong durability, and real value today.

Volkswagen Passat Sway Bar Bushing Parts and Q&A

Bushings
3B7-511-327
Q: How to remove and replace the front sway bar and front sway bar bushing and its components on Volkswagen Passat?
A:
Lift the front of the car and place it firmly on jackstands and then take off the under-vehicle splash shield. Connect the stabilizer bar links to the stabilizer bar by loosening the nuts, and removing the nut and bolt holding the link to the bar (and removing bolt B in the event of removing the Control Arm). The initial models might demand the total removal of the connection between the control arm and the link. Then, take the nuts out and loosen the stabilizer bar bushing clamps on the subframe and lastly face out the stabilizer bar, unbolstering the links of the control arms as needed. Check the clamps bushings and link bushings, to see whether they have any cracks, hardening, or wear, and replace when necessary. Lastly, install the parts in the order of their removal with all the fasteners tightened at the required torque.
Bushings
4D0-411-327-H
Q: How to replace the rear Sway Bar and rear Sway Bar Bushing on Volkswagen Passat?
A:
In 2WD models, the rear stabilizer bar extends along the axle beam length and is part and parcel of the axle assembly and therefore cannot be removed, damaged in any way and will force replacement of the complete axle assembly. In all-wheel drives, one should first loosen the rear wheel bolts, raise the rear of the vehicle and support it safely on jack stands without rolling the front wheels. Then take off the rear wheels, then unscrew the nuts of the stabilizer bar connections, and detach the connections of the bar and the links. Then loosen the stabilizer bar with the help of stabilizer bar clamp nuts and bolts. Check the stabilizer bar bushings and link bushings, looking at them with respect to cracks, tears, or any other sign of wear, replacing where necessary, and inspecting the ball studs at the end of the links at the same time, replacing the links as necessary. The installation process is in the opposite sequence of the unloading sequence and in this process all the fasteners are tightened to the required torque and the last step is to tighten the wheel bolts to the required torque.