Question 1

How does the TPMS Sensor contribute to preventing being stranded with a flat tire and provide vital information about potential issues in the steering and suspension systems on Volkswagen Jetta?

Accepted Answer

Routine checking of the tires would help to avoid the pain and inconvenience of getting stuck with the flat tire and reveal crucial details about any troubles in the steering and suspension mechanisms before significant damage may happen. The tires that are installed on the car have width bands of 1/2-inch which can be seen when the treads of the tires become 1/16-inch in depth, that is, they are worn out. A simple, cheap tread depth indicator which can be purchased in auto parts stores can be used to monitor tread wear. Abnormality in tread wear e.g. cupping or uneven wear can indicate alignment or balance issues in the front end, and a visit to a tire shop is required to rectify. Also, carefully look at the cuts, puncture, and embedded objects such as nails because they may create slow leaks. In case of being aware of slow leak, make sure that the stem core of a valve is tight and the tread does not contain any foreign object. The bubbles will also make the solution of soapy water identify any leaks because the solution will have some bubbles in case of a puncture. Check the inside of the tires of each tire in case there is a leakage of brake fluid, this is something that has to be attended to. It is important to keep the air pressure at the right level to prolong the life of tires, increase the mileage of the vehicle, and improve the quality of the ride; thus, a proper tire pressure gauge is necessary since it can be unreliable at gas stations. A cold tire pressure should be checked and preferably after the vehicle has not travelled more than one mile in the preceding three hours as hot tires may indicate an increase in pressure of four to eight pounds. To measure the pressure, loosen the valve cap and strongly press the gauge on the valve stem and record the reading and compare with the required tire pressure. Install back the valve cap to keep dirt and moisture out and also make sure all four tires are inflated including the spare tire which should also be inflated to the required pressure.

Question 2

How does a TPMS Sensor help in preventing inconvenience and identifying potential issues on Volkswagen Rabbit?

Accepted Answer

Regular checking of the tires can help you avoid the inconvenience of having to sit there with a flat tire and also give you the information on potential issues in the steering and suspension system before it could cause a significant amount of damage. The tires used on this vehicle have bands in them which are 1/2-inch wide and they will form when the tread depth becomes 1/16-inch which is a sign that they are worn off. A tread depth indicator is a simple, low-cost device that can be used to monitor tread wear. Record any unusual tread wear, any front end problem like cupping, flat spots and uneven wear may be signs of front end alignment or balance problem and needs to be addressed at a tire shop or service station. Be on the alert to check the cuts, punctures, and embedded nails or tacks because a tire can contain the air pressure temporarily, or can leak after a nail has lodged in the tread. In case of a slow leak and it continues, inspect the valve stem core at the top to make sure it is tight and the tread to check whether it has objects or plugs which might be leaking. The presence of a suspected puncture can be confirmed by sprinkling soapy water solution on the puncture since the presence of bubbles will indicate a leak; a tire shop is normally able to fix the puncture unless there is something wrong with the puncture. Check the inner sidewall of every tire to indicate the possible leakage of brake fluid and in case it has any, examine the brakes immediately. The proper air pressure will not only prolong the life of the tires, but will also increase the miles per gallon and the overall ride quality and therefore a tire pressure gauge is necessary because no one can be able to estimate the air pressure using the look of the tire. Never check tire pressure when tires are hot that is, the vehicle has not traveled more than a mile during the three hours before checking the pressure because it is normal to find a four to eight pound pressure increase when hot. Cut the valve top off the wheel or hubcap and insert the gauge firmly on the valve stem and record the reading and compare it to the recommended tire pressure indicated on the tire placard on the door that is at the driver side. Install the valve cap again to ensure the valve stem mechanism is kept out of the dirt and moisture, inspect the four tires, and put in more air as needed to bring the pressure up to the recommended amount. Also maintain the spare tire to the pressure that is announced on the tire sidewall.

Genuine Volkswagen TPMS Sensor

10 TPMS Sensors found

Volkswagen Valve Part Number: 5Q0-601-361-A

Volkswagen TPMS Sensor Part Number: 1K0-907-253-E

Volkswagen Antenna Part Number: 7PP-907-283

Volkswagen Amplifier Part Number: 4F0-907-283

Volkswagen TPMS Sensor Part Number: 7B0-907-253-J

Volkswagen TPMS Sensor Part Number: 1K0-907-253-D

Volkswagen TPMS Sensor Part Number: 5Q0-907-275-F

Volkswagen TPMS Sensor Part Number: 4D0-907-275-E

Volkswagen TPMS Sensor Part Number: 3AA-907-275-F

Volkswagen TPMS Sensor Part Number: 7L0-907-275-D

Volkswagen TPMS Sensor

Volkswagen TPMS Sensor Parts and Q&A

Related Volkswagen Parts

Browse by Model