How to remove and install the clutch cable on Volkswagen Cabrio?

In the event that you have to remove the clutch cable, it is necessary to depress the clutch pedal a couple of times before the automatic adjustment mechanism settles. Position Slide the locking strap to the top of the adjustment mechanism protective boot, hand holding the top and bottom of the adjustment mechanism, compress it and attach the end of the locking strap over the lugs on the side. In case the locking strap does not fit the clutch cable, one can make a homemade one with nylon cable-ties or wire. The next step, which is to lift the clutch release lever and remove the inner clutch cable and locking plates and rubber damper. The next step involves taking the trim panels off below the steering column in the car and the inner cable in the part of the clutch pedal marked with a recess. Pull the clutch cable out of the firewall grommet into the engine bay, and unreach out to the attaching clips. To install, poke the clutch cable under the firewall grommet into the cabin, rub the inner end of the clutch cable with multi-purpose grease and then place the cable into the hole in the top of the clutch pedal and fit the trim panels again. Adjustment mechanism Pretension the adjustment mechanism by pushing the clutch pedal down, and press the adjustment mechanism together until and an assistant pulls the inner clutch cable and compresses the adjustment mechanism, and holds the locking strap to hold the adjustment mechanism compressed. Within the engine compartment insert the inner cable through the release lever and attach the retaining plates and rubber damper. Slide the bottom of the adjustment mechanism to the retaining bracket on the transaxle casing, unattach the lock strap of the lugs, and press the clutch pedal several times until the cable tension is adjusted. Lastly, check the feel of the clutch pedal and look at it to determine whether it is stiff or binding, and look at the cable to make sure that it has no sharp kink or bend, and also test the clutch system by carrying out a road test to make sure that the system functionalities are met.

Genuine Volkswagen Clutch Cable

Clutch Cable Wire

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Clutch Cables found

View related parts
Volkswagen Release Cable Part Number: 191-721-335-M
$24.17 MSRP: $40.28
You Save: $16.11 (40%)
ADD TO CART
Product Specifications
- Other Name: Clutch Cable
Fits the following Volkswagen Models:
- Golf | 1985-1989 | Base, GTI, GTI 16-Valve | 4 Cyl 1.8 L GAS
- Jetta | 1987-1989, 1984-1985 | Base, GL, GLI, GLI 16-Valve | 4 Cyl 1.8 L GAS
View related parts
Volkswagen Release Cable Part Number: 171-721-335-E
$27.18 MSRP: $45.30
You Save: $18.12 (40%)
ADD TO CART
Product Specifications
- Other Name: Clutch Cable
Fits the following Volkswagen Models:
- Cabriolet | 1985-1993 | Base, Bestseller, Boutique, Carat, Classic, Etienne Aigner, Wolfsburg Edition | 4 Cyl 1.8 L GAS
- Scirocco | 1985-1988 | 16-Valve, Base | 4 Cyl 1.8 L GAS
View related parts
Volkswagen Release Cable Part Number: 307-721-335-5
$30.53 MSRP: $50.88
You Save: $20.35 (40%)
ADD TO CART
Product Specifications
- Other Name: Clutch Cable
Fits the following Volkswagen Models:
- Fox | 1991-1993 | Base, GL | 4 Cyl 1.8 L GAS
View related parts
Volkswagen Release Cable Part Number: 321-721-335-E
$63.15 MSRP: $88.45
You Save: $25.30 (29%)
ADD TO CART
Product Specifications
- Other Name: Clutch Cable
Fits the following Volkswagen Models:
- Quantum | 1984-1988 | Base, GL, Syncro | 4 Cyl 1.6 L DIESEL, 5 Cyl 2.2 L GAS
View related parts
Volkswagen Release Cable Part Number: 533-721-335-C
$64.26 MSRP: $90.00
You Save: $25.74 (29%)
ADD TO CART
Product Specifications
- Other Name: Clutch Cable
Fits the following Volkswagen Models:
- Scirocco | 1984-1988 | 16-Valve, Base | 4 Cyl 1.8 L GAS
View related parts
Volkswagen Release Cable Part Number: 531-721-335-C
$69.02 MSRP: $96.67
You Save: $27.65 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Cable
Fits the following Volkswagen Models:
- Scirocco | 1984-1988 | 16-Valve, Base | 4 Cyl 1.8 L GAS
View related parts
Volkswagen Release Cable Part Number: 191-721-335-AB
$134.20 MSRP: $187.96
You Save: $53.76 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Cable
Fits the following Volkswagen Models:
- Golf | 1990-1992, 1985-1988 | Base, GTI 16-Valve, GTI 8-Valve | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Jetta | 1989-1992, 1984-1987 | Base, GL, GLI, GLI 16-Valve | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Release Cable Part Number: 1H1-721-335-A
$142.23 MSRP: $199.19
You Save: $56.96 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Cable
Fits the following Volkswagen Models:
- Cabrio | 1995-2002 | Base, GL, GLS, GLX, High Line | 4 Cyl 2.0 L GAS
- Golf | 1996-1999, 1994 | GTI | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
- Jetta | 1994-1999 | Base, Celebration Edition, City, GL, GLS, GLX, GT, Jazz, K2, TDI, Trek, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View More
View related parts
Volkswagen Release Cable Part Number: 307-721-335-2
$20.45 MSRP: $27.93
You Save: $7.48 (27%)
ADD TO CART
Product Specifications
- Other Name: Clutch Cable
Fits the following Volkswagen Models:
- Fox | 1987-1990 | Base, GL, GL Sport | 4 Cyl 1.8 L GAS

Volkswagen Clutch Cable

Volkswagen Clutch Cable allows for quick and light pedal operation that disconnects engine power so gears change with ease, giving every driver responsive control for less wear on the transmission. Since 1937, VW has been the champion of practical innovation, from the legendary Beetle to modern ID electric cars, all with the same eye for clean lines, solid build quality, and smart technology such as TSI turbo engines, digital cockpits, and MIB infotainment that make daily trips more fun and efficient. The brand's flexible MQB platform keeps costs down while providing consistent handling feel across hatchbacks, vans, and SUVs, and upcoming EV projects demonstrate VW commitment to a cleaner future while still honoring the simple joy found in the original people's car. That same commitment to ease of use influences components like the Clutch Cable, a robust strand of steel inside a smooth sheath, which connects the pedal to the clutch release arm and shuts off torque the moment a foot hits the pedal, allowing the gearbox to slip and go to the next ratio without grinding. Lightweight construction reduces overall weight of the vehicle, manual adjusters allow drivers to adjust free play for the familiar VW pedal feel, and corrosion-resistant materials extend service life so owners spend more time enjoying the drive and less time swapping out parts. Due to its use of simple mechanics, as opposed to fluid lines, this Clutch Cable remains easy to inspect and replace, providing confidence throughout the entire lineup.

Buying OEM parts is a smart move to keep your long-term repair costs low. These components are built to last because VW uses such strict factory standards. At VWPartsGiant.com, it is easy to find genuine Volkswagen Clutch Cable at prices that actually beat the competition. You get a real manufacturer's warranty with every single part, so you know your purchase is safe. Plus, forget about return headaches since our policy is easy and worry-free. We ship your order fast, too. If you have questions, our team of parts experts is ready to help. Why wait? Start shopping now!

Volkswagen Clutch Cable Parts and Q&A

Release Cable
1H1-721-335-A
Q: How to remove and install the clutch cable on Volkswagen Cabrio?
A:
In the event that you have to remove the clutch cable, it is necessary to depress the clutch pedal a couple of times before the automatic adjustment mechanism settles. Position Slide the locking strap to the top of the adjustment mechanism protective boot, hand holding the top and bottom of the adjustment mechanism, compress it and attach the end of the locking strap over the lugs on the side. In case the locking strap does not fit the clutch cable, one can make a homemade one with nylon cable-ties or wire. The next step, which is to lift the clutch release lever and remove the inner clutch cable and locking plates and rubber damper. The next step involves taking the trim panels off below the steering column in the car and the inner cable in the part of the clutch pedal marked with a recess. Pull the clutch cable out of the firewall grommet into the engine bay, and unreach out to the attaching clips. To install, poke the clutch cable under the firewall grommet into the cabin, rub the inner end of the clutch cable with multi-purpose grease and then place the cable into the hole in the top of the clutch pedal and fit the trim panels again. Adjustment mechanism Pretension the adjustment mechanism by pushing the clutch pedal down, and press the adjustment mechanism together until and an assistant pulls the inner clutch cable and compresses the adjustment mechanism, and holds the locking strap to hold the adjustment mechanism compressed. Within the engine compartment insert the inner cable through the release lever and attach the retaining plates and rubber damper. Slide the bottom of the adjustment mechanism to the retaining bracket on the transaxle casing, unattach the lock strap of the lugs, and press the clutch pedal several times until the cable tension is adjusted. Lastly, check the feel of the clutch pedal and look at it to determine whether it is stiff or binding, and look at the cable to make sure that it has no sharp kink or bend, and also test the clutch system by carrying out a road test to make sure that the system functionalities are met.