How should the hood be removed and installed safely and correctly on Volkswagen Passat?

The hood is heavy and somewhat awkward to remove and install, so at least two people should perform this procedure. Begin by using blankets or pads to cover the cowl area of the body and the fenders to protect the body and paint during the hood lift. Scribe alignment marks around the hinge plate to ensure proper alignment during installation, using a permanent-type felt-tip marker or a marking pen. Disconnect the windshield washer hoses from the jets at the rear of the hood and the underhood light if applicable. Have an assistant support the weight of the hood while detaching the upper end of the hood support strut. Remove the hinge-to-hood bolts and lift off the hood, with installation being the reverse of removal. For adjustment, fore-and-aft and side-to-side alignment of the hood can be achieved by moving it in relation to the hinge plates after loosening the bolts. Scribe or trace a line around the entire hinge plate to judge the amount of movement, then loosen the bolts and adjust the hood into the correct alignment, tightening the hinge bolts or nuts and carefully lowering the hood to check the alignment. Adjust the hood bumpers on the front edge so the hood is flush with the fenders when closed, and adjust the safety latch assembly up-and-down and side-to-side after loosening the nuts. Periodically lubricate the hood latch assembly and hinges with white lithium-base grease to prevent sticking and wear.

Genuine Volkswagen Passat Hood

Engine Hood

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Hoods found

View related parts
Volkswagen Passat Hood Part Number: 3B0-823-031-K
$231.03 MSRP: $323.56
You Save: $92.53 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2001-2005 Volkswagen Passat | GL, GL TDI, GLS, GLS 4 Motion, GLS TDI, GLX, GLX 4 Motion, W8 | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 6 Cyl 2.8 L GAS, 8 Cyl 4.0 L GAS
View related parts
Volkswagen Passat Hood Part Number: 3C0-823-031-B
$236.61 MSRP: $331.38
You Save: $94.77 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2006-2007 Volkswagen Passat | 2.0T, 3.6, Value Edition, Wolfsburg Edition | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Hood Part Number: 3C0-823-031-A
$246.40 MSRP: $336.62
You Save: $90.22 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 3C0-823-031
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2006 Volkswagen Passat | 2.0T, 3.6, Value Edition | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Hood Part Number: 3C0-823-031-C
$267.73 MSRP: $365.75
You Save: $98.02 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2007-2010 Volkswagen Passat | 2.0T, 3.6, Komfort, Lux, Turbo, Value Edition, VR6, Wolfsburg Edition | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Hood Part Number: 3B0-823-031-E
$370.15 MSRP: $505.66
You Save: $135.51 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1998-2001 Volkswagen Passat | 4 Motion, GLS, GLS 4 Motion, GLX, GLX 4 Motion | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Passat Hood Part Number: 561-823-031-E
$519.22 MSRP: $709.31
You Save: $190.09 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 561-823-031-D, 561-823-031-C, 561-823-031-B, 56D-823-031-A
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2012-2015 Volkswagen Passat | Limited Edition, S, SE, SEL, SEL Premium, Sport, TDI SE, TDI SEL, TDI SEL Premium, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 5 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Hood Part Number: 561-823-031-F
$564.71 MSRP: $771.47
You Save: $206.76 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2016-2019 Volkswagen Passat | GT, R-Line, S, SE, SE R-Line, SEL, SEL Premium, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Passat Hood Part Number: 561-823-031-G
$624.55 MSRP: $853.21
You Save: $228.66 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 2020-2022 Volkswagen Passat | Limited Edition, R-Line, S, SE, SEL | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Passat Hood Part Number: 3A0-823-033-A
$175.45 MSRP: $245.73
You Save: $70.28 (29%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1995-1997 Volkswagen Passat | GLS, GLX, TDI | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Passat Hood Part Number: 357-823-031-C
$367.90 MSRP: $502.57
You Save: $134.67 (27%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1990-1994 Volkswagen Passat | CL, GL, GLX | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS

Volkswagen Passat Hood

Volkswagen Passat Hood is essentially a durable hinged cover that keeps the engine bay dry during bad weather, as well as during the blowing of road debris, and also allows easy access for owners of the car so that they can perform routine servicing. Constructed of steel, aluminum or lightweight fiberglass, the cover will crumple in an impact, reducing the force of impact before it reaches any critical parts. In addition to protection, some versions are also shaped into vents and scoops to provide the vehicle with additional airflow and add a unique design that will make the sedan stand out among the traffic. Over the years there have been seen to emerge two broad styles namely the plain smooth panel standard on most trims and the performance inspired with venting which is differentiated by external openings that direct air besides their more sporty appearance. Replacement parts supplied in original equipment gauge steel perfectly fit, and Passat owners can replace a damaged part without leaving visible seams or gaps to ensure that the general shape of a Passat is factory true to any silhouette on the road. All Volkswagen branded options retain the same latch and hinge system that is very easy to install using common hand tools. Frequent checking is important since the protective barrier may be destroyed by dents or corrosion, which leaves the sensitive wiring and belts open to moisture and grime. A prompt replacement of the Hood will not only restore both desired crumple areas but will also ensure resale value of the Volkswagen sedan as the Hood is much more than a lid, it is in fact a safety feature, a styling canvas and a practical window into the underbody that every Volkswagen owner would want to keep in good condition.

Choose OEM Hood for superior quality and long-lasting durability. They match the Volkswagen's factory specifications exactly and pass strict quality control. If you plan to replace Hood on your Passat, put OEM at the top of your list. You'll get the right fit, reliable performance, and peace of mind. We stock an extensive inventory of genuine Volkswagen Passat parts. It is easy to find what you need. You will love our competitive prices that help you save. No more hassle with returns or guesswork. Every part includes a warranty straight from the manufacturer. Get trusted quality, strong durability, and real value today.

Volkswagen Passat Hood Parts and Q&A

Hood
3B0-823-031-E
Q: How should the hood be removed and installed safely and correctly on Volkswagen Passat?
A:
The hood is heavy and somewhat awkward to remove and install, so at least two people should perform this procedure. Begin by using blankets or pads to cover the cowl area of the body and the Fenders to protect the body and paint during the hood lift. Scribe alignment marks around the hinge plate to ensure proper alignment during installation, using a permanent-type felt-tip marker or a marking pen. Disconnect the windshield washer hoses from the jets at the rear of the hood and the underhood light if applicable. Have an assistant support the weight of the hood while detaching the upper end of the hood support strut. Remove the hinge-to-hood bolts and lift off the hood, with installation being the reverse of removal. For adjustment, fore-and-aft and side-to-side alignment of the hood can be achieved by moving it in relation to the hinge plates after loosening the bolts. Scribe or trace a line around the entire hinge plate to judge the amount of movement, then loosen the bolts and adjust the hood into the correct alignment, tightening the hinge bolts or nuts and carefully lowering the hood to check the alignment. Adjust the hood bumpers on the front edge so the hood is flush with the fenders when closed, and adjust the safety latch assembly up-and-down and side-to-side after loosening the nuts. Periodically lubricate the Hood Latch assembly and hinges with white lithium-base grease to prevent sticking and wear.