How to remove and install a window switch on a window winder motor on Volkswagen Cabrio?

The regulator assembly must be removed to remove the window winder motor. Then take off two small Torx-headed screws that hold the motor, and apply them to hold the bottomplate to the regulator assembly. Then loosen the retaining screws remaining and the five larger Torx-headed retaining screws, to detach the motor and the regulator, making sure to retrieve the shim, but leaving the baseplate on the regulator. Wipe the motor assembly during this process. To install a new motor, begin by removing the fitting cover and first of all ensure the parts of the motor drive gears are well oiled and dust free. Make sure that the regulator and baseplate are clean, next place the shim on the motor shaft and make sure that the motor is centered properly on the regulator. Install the retaining bolts of the motor loosely, and replace the two bolts holding the baseplate and connect them to the motor. After the bolts have been placed loosely, attach the bigger bolts firmly in the mentioned order afterward the smaller bolts that will hold the retaining made. Lastly, fit the regulator assembly again.

Genuine Volkswagen Cabrio Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Window Switches found

View related parts
Volkswagen Cabrio Switch Part Number: 1E0-959-855-B-01C
$69.02 MSRP: $96.67
You Save: $27.65 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Window Switch
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1999-2002 Volkswagen Cabrio | Base, GL, GLS, GLX | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Cabrio Window Switch Part Number: 1H0-959-855-C-01C
$48.84 MSRP: $67.83
You Save: $18.99 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1995-2000 Volkswagen Cabrio | Base, GL, GLS, High Line | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Cabrio Window Switch Part Number: 1E0-959-855-A-01C
$64.26 MSRP: $90.00
You Save: $25.74 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
- Position: Right
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1999-2002 Volkswagen Cabrio | Base, GL, GLS, GLX | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Cabrio Window Switch Part Number: 1E0-959-855-A-Q70
$64.26 MSRP: $90.00
You Save: $25.74 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
- Position: Right
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1999-2002 Volkswagen Cabrio | Base, GL, GLS, GLX | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Cabrio Switch Part Number: 1H0-959-728-H50
$77.83 MSRP: $109.00
You Save: $31.17 (29%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1996-2000 Volkswagen Cabrio | Base, GL, GLS, High Line | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Cabrio Window Switch Part Number: 1E1-959-855-Q70
$85.68 MSRP: $120.00
You Save: $34.32 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
- Position: Left
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1999-2002 Volkswagen Cabrio | Base, GL, GLS, GLX | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Cabrio Window Switch Part Number: 1E1-959-855-01C
$117.44 MSRP: $164.48
You Save: $47.04 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
- Position: Left
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1999-2002 Volkswagen Cabrio | Base, GL, GLS, GLX | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Cabrio Window Switch Part Number: 1H0-959-855-01C
$122.44 MSRP: $171.49
You Save: $49.05 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
- Warranty: This genuine part is guaranteed by Volkswagen's factory warranty.
Fits the following Vehicles:
- 1995-2000 Volkswagen Cabrio | Base, GL, GLS, High Line | 4 Cyl 2.0 L GAS

Volkswagen Cabrio Window Switch

Choose OEM Window Switch for superior quality and long-lasting durability. They match the Volkswagen's factory specifications exactly and pass strict quality control. If you plan to replace Window Switch on your Cabrio, put OEM at the top of your list. You'll get the right fit, reliable performance, and peace of mind. We stock an extensive inventory of genuine Volkswagen Cabrio parts. It is easy to find what you need. You will love our competitive prices that help you save. No more hassle with returns or guesswork. Every part includes a warranty straight from the manufacturer. Get trusted quality, strong durability, and real value today.

Volkswagen Cabrio Window Switch Parts and Q&A

Switch
1E0-959-855-B-01C
Q: How to remove and install a window switch on a window winder motor on Volkswagen Cabrio?
A:
The regulator assembly must be removed to remove the window winder motor. Then take off two small Torx-headed screws that hold the motor, and apply them to hold the bottomplate to the regulator assembly. Then loosen the retaining screws remaining and the five larger Torx-headed retaining screws, to detach the motor and the regulator, making sure to retrieve the shim, but leaving the baseplate on the regulator. Wipe the motor assembly during this process. To install a new motor, begin by removing the fitting cover and first of all ensure the parts of the motor drive gears are well oiled and dust free. Make sure that the regulator and baseplate are clean, next place the shim on the motor shaft and make sure that the motor is centered properly on the regulator. Install the retaining bolts of the motor loosely, and replace the two bolts holding the baseplate and connect them to the motor. After the bolts have been placed loosely, attach the bigger bolts firmly in the mentioned order afterward the smaller bolts that will hold the retaining made. Lastly, fit the regulator assembly again.