What steps should be taken to safely inspect and potentially replace the drive belts on Volkswagen Cabrio?

Unconnect the battery negative cable and lay it out of the terminal making sure you have the correct activation code to the stereo in case it has an anti-theft system. Park the car on a flat ground, set the parking brake and block the back wheels. Relax the lug bolts of the wheel, lift the front end of the car, and place it on solid footing with jackstands and then loosen the wheels. To lower the engine undercover, turn the steering to the full right hand lock, and then use screws and clips to remove the steering. With a socket and ratchet or breaker bar on the bolt in the crankshaft sprocker, turn the crankshaft to check the entire length of the drivebelts: any cracks, splitting, fraying, glazing, or separation of the belt plies must be visible: in this case the belt is to be replaced.

What is the significance of Drive Belts in vehicle operation and how should they be inspected and replaced on Volkswagen Jetta?

The drivebelt(s) which are situated in the front of the engine are very important in the functioning of the vehicle and its parts and because of the work they perform, their components are prone to failure with time and it is because of this that they need regular check and adjustment so as to prevent serious damage to the engine. Four-cylinder engines normally use a serpentine type of drivebelt that is self-adjusting and is used to power all other accessory-related components, compared to five-cylinder engines that are fitted with two serpentine type drivebelts with the outer belt driving the air conditioning compressor and the inner belt driving the alternator and water pump. Things to check to inspect the drivebelt: make sure the engine is not on, open the hood, and look at both sides of the belt to check the cracks, separation, fraying and glazing of the belt as well as the ribbons on the underside to ensure that they are of the same depth. The tensioner also automatically adjusts the belt tension and does not need any manual adjustments. To change it, unscrew the splash shield under-vehicle fasteners then draw the shield. On 1.8L and 2.0L timing chain motors and 1.4L timing belt motors, clockwise rotation of the tensioner and attaching it with a drill bit to retain it in place then routing the new belt over the pulleys and releasing the tensioner. In the case of five-cylinder engines, an outer air conditioning compressor belt is changed, then an inner alternator and water pump belt, the engagement under the pulley grooves should be made. Replacement of tensioner would entail removal of drivebelt, attach the tensioner to the engine and re-attach it to the engine with the necessary torque. Two tensioners are required with the 2.5L models, with the air conditioning tensioner belt being removed first so that the alternator and water pump tensioner can be accessed and then installed in the same order as the belt was removed.

Genuine Volkswagen Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

89 Drive Belts found

View related parts
Volkswagen Belt Part Number: 357-119-137
$8.24 MSRP: $13.50
You Save: $5.26 (39%)
ADD TO CART
Product Specifications
- Other Name: V-Belt
Fits the following Volkswagen Models:
- Passat | 1990-1991 | GL | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Alternator Belt Part Number: 027-903-137
$10.07 MSRP: $16.50
You Save: $6.43 (39%)
ADD TO CART
Product Specifications
- Other Name: V-Belt; Power Steering Belt
Fits the following Volkswagen Models:
- Cabriolet | 1985-1993 | Base, Bestseller, Boutique, Carat, Classic, Etienne Aigner, Wolfsburg Edition | 4 Cyl 1.8 L GAS
- Golf | 1985-1992 | Base, GL, GT, GTI, GTI 16-Valve, GTI 8-Valve | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Jetta | 1985-1992 | Base, Carat, GL, GLI, GLI 16-Valve | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Passat | 1990-1993 | CL, GL | 4 Cyl 2.0 L GAS
- Scirocco | 1985-1988 | 16-Valve, Base | 4 Cyl 1.8 L GAS
View More
View related parts
Volkswagen Belt Part Number: 06B-903-137-E
$25.70 MSRP: $35.70
You Save: $10.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt; Belt
- Replaces: 06B-903-137
Fits the following Volkswagen Models:
- Passat | 1998-2005 | GL, GLS, GLS 4 Motion | 4 Cyl 1.8 L GAS
View related parts
Volkswagen Serpentine Belt Part Number: 038-903-137-G
$26.40 MSRP: $36.67
You Save: $10.27 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt
Fits the following Volkswagen Models:
- Beetle | 1998-2001 | GL, GLS, Sport, TDI | 4 Cyl 1.9 L DIESEL
- Golf | 1999-2003 | GL, GLS, TDI | 4 Cyl 1.9 L DIESEL
- Jetta | 1999-2001 | TDI | 4 Cyl 1.9 L DIESEL
View More
View related parts
Volkswagen Serpentine Belt Part Number: 07K-145-933-G
$26.51 MSRP: $36.82
You Save: $10.31 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt
Fits the following Volkswagen Models:
- Beetle | 2012-2014, 2006-2010 | 2.5, Base, S, SE | 5 Cyl 2.5 L GAS
- Jetta | 2011-2013 | S, SE, SEL | 5 Cyl 2.5 L GAS
- Passat | 2012-2014 | S, SE, SEL, SEL Premium, Wolfsburg Edition | 5 Cyl 2.5 L GAS
View More
View related parts
Volkswagen Serpentine Belt Part Number: 06F-260-849-L
$28.67 MSRP: $39.82
You Save: $11.15 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt
Fits the following Volkswagen Models:
- Eos | 2007-2008 | 2.0T, Base, Komfort, Lux, Turbo | 4 Cyl 2.0 L GAS
- GTI | 2006-2008 | Base, Fahrenheit | 4 Cyl 2.0 L GAS
- Golf R | 2012-2013 | Base | 4 Cyl 2.0 L GAS
- Jetta | 2006-2009 | 2.0T, GLI, SEL, Wolfsburg Edition | 4 Cyl 2.0 L GAS
- Passat | 2006-2008 | 2.0T, Komfort, Lux, Turbo, Value Edition, Wolfsburg Edition | 4 Cyl 2.0 L GAS
View More
View related parts
Volkswagen Drive Belt Part Number: 04E-121-605-E
$29.39 MSRP: $40.82
You Save: $11.43 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tooth Belt; Water Pump Belt
Fits the following Volkswagen Models:
- Golf | 2019-2021 | S, SE, TSi | 4 Cyl 1.4 L GAS
- Golf SportWagen | 2019 | S, SE | 4 Cyl 1.4 L GAS
- Jetta | 2016-2021 | Hybrid SEL Premium, R-Line, S, SE, SEL, SEL Premium, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS
View More
View related parts
Volkswagen Serpentine Belt Part Number: 03G-903-137-B
$29.51 MSRP: $40.99
You Save: $11.48 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt
Fits the following Volkswagen Models:
- Jetta | 2005-2006 | GL TDI, GLS TDI, TDI | 4 Cyl 1.9 L DIESEL
View related parts
Volkswagen Serpentine Belt Part Number: 03L-903-137-T
$29.51 MSRP: $40.99
You Save: $11.48 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt
- Replaces: 03L-903-137, 03L-903-137-G
Fits the following Volkswagen Models:
- Beetle | 2013-2015 | TDI | 4 Cyl 2.0 L DIESEL
- Golf | 2010-2014 | TDI | 4 Cyl 2.0 L DIESEL
- Jetta | 2009-2015 | S, TDI, TDI Cup Edition, TDI Premium, Wolfsburg Edition | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
- Passat | 2012-2015 | TDI SE, TDI SEL, TDI SEL Premium | 4 Cyl 2.0 L DIESEL
View More
View related parts
Volkswagen Serpentine Belt Part Number: 06L-903-137-A
$29.51 MSRP: $40.99
You Save: $11.48 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt
Fits the following Volkswagen Models:
- Arteon | 2019-2023 | SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line | 4 Cyl 2.0 L GAS
- Atlas | 2018-2023 | S, SE, SEL, SEL Premium | 4 Cyl 2.0 L GAS
- Atlas Cross Sport | 2020-2023 | S, SE, SEL, SEL R-Line, SEL R-Line Black | 4 Cyl 2.0 L GAS
- GTI | 2015-2024 | 40th Anniversary Edition, Autobahn, Rabbit Edition, S, SE, Sport | 4 Cyl 2.0 L GAS
- Golf | 2015-2018 | Base, Launch Edition, S, SE, SEL, Wolfsburg Edition | 4 Cyl 1.8 L GAS
- Golf Alltrack | 2017-2019 | S, SE, SEL | 4 Cyl 1.8 L GAS
- Golf R | 2015-2019 | Base | 4 Cyl 2.0 L GAS
- Golf SportWagen | 2015-2019 | Limited Edition, S, SE, SEL | 4 Cyl 1.8 L GAS
- Jetta | 2019-2024 | GLI 35th Anniversary Edition, GLI Autobahn, GLI S | 4 Cyl 2.0 L GAS
- Tiguan | 2018-2024 | S, SE, SE R-Line Black, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Jet Black | 4 Cyl 2.0 L GAS
View More
View related parts
Volkswagen Serpentine Belt Part Number: 038-903-137-T
$29.99 MSRP: $41.65
You Save: $11.66 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt
- Replaces: 038-903-137-H
Fits the following Volkswagen Models:
- Passat | 2004-2005 | GL TDI, GLS TDI | 4 Cyl 2.0 L DIESEL
View related parts
Volkswagen Drive Belt Part Number: 06E-903-137-S
$29.99 MSRP: $41.65
You Save: $11.66 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt
Fits the following Volkswagen Models:
- Touareg | 2011-2015 | Hybrid | 6 Cyl 3.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Volkswagen Alternator Belt Part Number: 028-903-137-AM
$32.16 MSRP: $44.67
You Save: $12.51 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt
Fits the following Volkswagen Models:
- Golf | 1999 | GL | 4 Cyl 1.9 L DIESEL
- Jetta | 1997-1999 | TDI | 4 Cyl 1.9 L DIESEL
View related parts
Volkswagen Drive Belt Part Number: 06H-121-605-E
$33.11 MSRP: $45.99
You Save: $12.88 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tooth Belt; Water Pump Belt
Fits the following Volkswagen Models:
- Beetle | 2012-2013 | R-Line, Turbo | 4 Cyl 2.0 L GAS
- CC | 2009-2017 | Executive, Lux, Lux Limited, Lux Plus, Luxury, R-Line, R-Line Executive, Sport, Sport Plus, Trend | 4 Cyl 2.0 L GAS
- Jetta | 2012-2018 | Base, GLI, GLI SE, GLI SEL, S | 4 Cyl 2.0 L GAS
- Tiguan | 2009-2017 | R-Line, S, SE, SEL, Sport, Wolfsburg Edition | 4 Cyl 2.0 L GAS
- Tiguan Limited | 2017-2018 | Base | 4 Cyl 2.0 L GAS
View More
View related parts
Volkswagen Serpentine Belt Part Number: 022-145-933-AP
$41.39 MSRP: $57.49
You Save: $16.10 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt
- Replaces: 022-145-933-AG, 022-145-933-T
Fits the following Volkswagen Models:
- Atlas | 2018-2023 | Launch Edition, S, SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black | 6 Cyl 3.6 L GAS
- Atlas Cross Sport | 2020-2023 | SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black | 6 Cyl 3.6 L GAS
- CC | 2009-2016 | 4 Motion, Executive, Executive 4 Motion, Lux, V6 Executive 4Motion, VR6, VR6 4Motion, VR6 4Motion Executive, VR6 Sport | 6 Cyl 3.6 L GAS
- Eos | 2007-2008 | 3.2, VR6 | 6 Cyl 3.2 L GAS
- Passat | 2012-2018, 2006-2008 | 3.6, GT, SE, SEL Premium, VR6 | 6 Cyl 3.6 L GAS
- R32 | 2008 | Base | 6 Cyl 3.2 L GAS
View More
View related parts
Volkswagen Serpentine Belt Part Number: 04E-145-933-AG
$39.59 MSRP: $54.99
You Save: $15.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt; Serpentine Belt
- Replaced by: 04E-145-933-AL
Fits the following Volkswagen Models:
- Golf | 2019-2021 | S, SE, TSi | 4 Cyl 1.4 L GAS
- Golf SportWagen | 2019 | S, SE | 4 Cyl 1.4 L GAS
- Jetta | 2016-2024 | Hybrid SEL Premium, R-Line, S, SE, SEL, SEL Premium, Sport, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS, 4 Cyl 1.5 L GAS
- Taos | 2022-2024 | S, SE, SEL | 4 Cyl 1.5 L GAS
View More
View related parts
Volkswagen Serpentine Belt Part Number: 074-260-849-J
$42.00 MSRP: $58.33
You Save: $16.33 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt
Fits the following Volkswagen Models:
- EuroVan | 1995, 1993 | Camper, CL, GL, MV | 5 Cyl 2.5 L GAS
View related parts
Volkswagen Serpentine Belt Part Number: 06E-903-137-AB
$49.20 MSRP: $68.33
You Save: $19.13 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt
Fits the following Volkswagen Models:
- Touareg | 2011-2015 | Hybrid | 6 Cyl 3.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Volkswagen Alternator Belt Part Number: 028-260-849-L
$44.39 MSRP: $61.66
You Save: $17.27 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt
- Replaces: 028-260-849-D
Fits the following Volkswagen Models:
- Golf | 1999 | GL | 4 Cyl 1.9 L DIESEL
- Jetta | 1997-1999 | TDI | 4 Cyl 1.9 L DIESEL
View related parts
Volkswagen Serpentine Belt Part Number: 037-260-849-C
$44.39 MSRP: $61.66
You Save: $17.27 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ribbed Belt; Serpentine Belt
Fits the following Volkswagen Models:
- Cabrio | 1995-2002 | Base, GL, GLS, GLX, High Line | 4 Cyl 2.0 L GAS
- Golf | 1993-1999 | Celebration Edition, City, GL, GTI, Jazz, K2, Limited Edition, Sport, Trek, Wolfsburg Edition | 4 Cyl 2.0 L GAS
- Jetta | 1993-1999 | Celebration Edition, City, GL, GLS, GT, Jazz, K2, Limited Edition, Trek, Wolfsburg Edition | 4 Cyl 2.0 L GAS
- Passat | 1995-1997 | GLS, TDI | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS
View More

| Page 1 of 5 |Next >

1-20 of 89 Results

Volkswagen Drive Belt

The Volkswagen Drive Belt is responsible for channeling engine power to the vital components to ensure that electricity, cooling, and cabin comfort are maintained on every journey. From the original Beetle to the futuristic ID range, the brand has sought to create the ideal people's car, a car that is fun and easy to approach and has clean shapes, coupled with rock-solid engineering that commands trust the world over. Today, turbocharged TSI engines, the flexible MQB platform, digital cockpits, and intuitive park assist are just a few examples of how VW continues to perfect performance, safety, and style while keeping prices in check. The push of this brand into electric mobility with the ID.3 and ID.4 proves VW is listening to the needs of drivers seeking to drive efficiently yet spiritedly, and its simple dashboards, responsive MIB touchscreens, and head-up displays make many daily journeys easy for new owners getting to grips with the road. Matching that broad vision, the component Drive Belt has a modern multi-rib design that conforms closely to pulleys, which resist slip with up to ninety-eight percent efficiency, allowing alternators, pumps, and compressors to rotate smoothly despite temperatures that range from subzero mornings to summer heat. It tolerates slight misalignment, cushions sudden spikes in load, and usually remains serviceable for about 100,000 miles, providing long stretches of worry-free operation for owners. Regular visual inspections for cracks or glazing help to catch wear early, preserving the strong character drivers expect from every VW.

Buying OEM parts is a smart move to keep your long-term repair costs low. These components are built to last because VW uses such strict factory standards. At VWPartsGiant.com, it is easy to find genuine Volkswagen Drive Belt at prices that actually beat the competition. You get a real manufacturer's warranty with every single part, so you know your purchase is safe. Plus, forget about return headaches since our policy is easy and worry-free. We ship your order fast, too. If you have questions, our team of parts experts is ready to help. Why wait? Start shopping now!

Volkswagen Drive Belt Parts and Q&A

Power Steering Belt
037-145-271-E
Q: What steps should be taken to safely inspect and potentially replace the drive belts on Volkswagen Cabrio?
A:
Unconnect the battery negative cable and lay it out of the terminal making sure you have the correct activation code to the stereo in case it has an anti-theft system. Park the car on a flat ground, set the parking brake and block the back wheels. Relax the lug bolts of the wheel, lift the front end of the car, and place it on solid footing with jackstands and then loosen the wheels. To lower the engine undercover, turn the steering to the full right hand lock, and then use screws and clips to remove the steering. With a socket and ratchet or breaker bar on the bolt in the crankshaft sprocker, turn the crankshaft to check the entire length of the drivebelts: any cracks, splitting, fraying, glazing, or separation of the belt plies must be visible: in this case the belt is to be replaced.
Serpentine Belt
03C-145-933-A
Q: What is the significance of Drive Belts in vehicle operation and how should they be inspected and replaced on Volkswagen Jetta?
A:
The drivebelt(s) which are situated in the front of the engine are very important in the functioning of the vehicle and its parts and because of the work they perform, their components are prone to failure with time and it is because of this that they need regular check and adjustment so as to prevent serious damage to the engine. Four-cylinder engines normally use a serpentine type of drivebelt that is self-adjusting and is used to power all other accessory-related components, compared to five-cylinder engines that are fitted with two serpentine type drivebelts with the outer belt driving the air conditioning compressor and the inner belt driving the alternator and water pump. Things to check to inspect the drivebelt: make sure the engine is not on, open the hood, and look at both sides of the belt to check the cracks, separation, fraying and glazing of the belt as well as the ribbons on the underside to ensure that they are of the same depth. The tensioner also automatically adjusts the belt tension and does not need any manual adjustments. To change it, unscrew the splash shield under-vehicle fasteners then draw the shield. On 1.8L and 2.0L timing chain motors and 1.4L timing belt motors, clockwise rotation of the tensioner and attaching it with a drill bit to retain it in place then routing the new belt over the pulleys and releasing the tensioner. In the case of five-cylinder engines, an outer air conditioning compressor belt is changed, then an inner alternator and water pump belt, the engagement under the pulley grooves should be made. Replacement of tensioner would entail removal of drivebelt, attach the tensioner to the engine and re-attach it to the engine with the necessary torque. Two tensioners are required with the 2.5L models, with the air conditioning tensioner belt being removed first so that the alternator and water pump tensioner can be accessed and then installed in the same order as the belt was removed.