How to remove and reinstall the trunk lid with lift support struts on Volkswagen Cabrio?

In order to remove the trunk lid, you must first open it and unplug the negative terminal of the battery, make sure to have the right activation code to the anti-theft system of the stereo just in case. The second step is to unclip the plastic covers so as to expose the rear lights, to unscrew the wiring connectors, and tie a strip of string to both ends of the wiring. Record adequate routing of the wiring harness, release the rubber grommets, and pull out the wiring which should be reinstalled with the strings intact. Draw the outline of every hinge using a marker, loosen and detach the hinge holding bolts to detach the trunk lid. Check the hinges to see whether they are worn or damaged and replace them should the need be. To take off the support struts, hold the trunk lid in the open posture, with the help of a small flat-bladed screwdriver, lift the spring clip and disconnect the strut on the upper and lower bases. To install, reverse the steps used in removal and position the hinges along the marks made earlier and once the trunk lid is closed, ensure it fits with the other panels and slightly adjust measures needed. Lastly, make sure that the support struts are firmly clipped in place.

How to access and replace the hood latch and lift support assembly on Volkswagen Jetta?

To open the latch, first open the hood and take off the front bumper cover, depending on the model it might not be necessary. By opening the release coupling disconnected the hood latch cable between the mid-way point of disconnection and the main disconnection point. For this step, remove the latch fasteners, detach the electrical connector to the latch assembly, and lift the latch assembly off the radiator support, be sure to unlock the hood latch release cable and the latch wiring harness off the clips along the radiator support. After taking off the latch, separate the release cable and hood latch switch out of the latch assembly by pressing the tab and pushing out the parts. Take any required parts and make them available to the new latch and install it by following the same steps in the reverse order. With a support strut fitted, open the hood and place it firmly; a small screwdriver is then needed to raise the retaining springs at one end of the support strut on one end and the same on the other end and then remove the support strut by unscrewing the same. The support strut as well is installed in the reverse of being removed.

Genuine Volkswagen Lift Support

Lift Support Shocks

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

108 Lift Supports found

View related parts
Volkswagen Lift Cylinder Part Number: 5N0-827-550-E
$32.54 MSRP: $54.23
You Save: $21.69 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder, Support Cylinder
- Replaces: 5N0-827-550-D, 5N0-827-550
Fits the following Volkswagen Models:
- Tiguan | 2009-2017 | R-Line, S, SE, SEL, Sport, Wolfsburg Edition | 4 Cyl 2.0 L GAS
- Tiguan Limited | 2017-2018 | Base | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Lift Cylinder Part Number: 2GJ-827-550
$33.86 MSRP: $56.43
You Save: $22.57 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut
Fits the following Volkswagen Models:
- Taos | 2022-2024 | S, SE, SEL | 4 Cyl 1.5 L GAS
View related parts
Volkswagen Lift Cylinder Part Number: 1C0-827-550-G
$30.96 MSRP: $51.60
You Save: $20.64 (40%)
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Support Cylinder
Fits the following Volkswagen Models:
- Beetle | 2002-2010 | 2.5, Base, GL, GLS, GLS TDI, GLX, S, SE, Sport, TDI, Turbo S | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Lift Cylinder Part Number: 1K5-827-550-C
$34.78 MSRP: $57.96
You Save: $23.18 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder
- Replaces: 1K5-827-550-B
Fits the following Volkswagen Models:
- Jetta | 2005-2010 | 2.0T, 2.5, GLI, S, SE, SEL, TDI, TDI Cup Edition, Value Edition, Wolfsburg Edition | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Lift Cylinder Part Number: 5GM-823-359
$35.84 MSRP: $59.73
You Save: $23.89 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder
Fits the following Volkswagen Models:
- GTI | 2015-2017 | Autobahn, S, SE, Sport | 4 Cyl 2.0 L GAS
- Golf | 2015-2018 | Base, Launch Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
- Golf Alltrack | 2017 | S, SE, SEL | 4 Cyl 1.8 L GAS
- Golf SportWagen | 2015-2017 | Limited Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
View More
View related parts
Volkswagen Strut Part Number: 1J6-827-550-B
$36.50 MSRP: $50.70
You Save: $14.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Strut
Fits the following Volkswagen Models:
- Golf | 2002-2006 | GL, GL TDI, GLS, GLS TDI, GTI 1.8T, GTI 20th Anniversary, GTI 337, GTI VR6, TDI | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Strut Part Number: 1K6-827-550-F
$37.84 MSRP: $52.54
You Save: $14.70 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Strut
Fits the following Volkswagen Models:
- GTI | 2006-2009 | Base, Fahrenheit | 4 Cyl 2.0 L GAS
- R32 | 2008 | Base | 6 Cyl 3.2 L GAS
- Rabbit | 2006-2009 | 2.5, S | 5 Cyl 2.5 L GAS
View More
View related parts
Volkswagen Lift Cylinder Part Number: 1K9-827-550-B
$37.84 MSRP: $52.54
You Save: $14.70 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder
- Replaces: 1K9-827-550-A
Fits the following Volkswagen Models:
- Jetta | 2009-2014 | S, SE, SEL, TDI | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Strut Part Number: 5K6-827-550-D
$37.84 MSRP: $52.54
You Save: $14.70 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder
Fits the following Volkswagen Models:
- GTI | 2010-2014 | Base, Driver's Edition, Wolfsburg Edition | 4 Cyl 2.0 L GAS
- Golf | 2010-2014 | Base, TDI | 4 Cyl 2.0 L DIESEL, 5 Cyl 2.5 L GAS
- Golf R | 2012-2013 | Base | 4 Cyl 2.0 L GAS
View More
View related parts
Volkswagen Lift Cylinder Part Number: 1C0-827-550-E
$38.89 MSRP: $54.01
You Save: $15.12 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Support Cylinder
- Replaces: 1C0-827-550-C, 1C0-827-550-A
Fits the following Volkswagen Models:
- Beetle | 1999-2010 | 2.5, Base, GL, GLS, GLS TDI, GLX, S, SE, Sport, TDI, Turbo S | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
- Cabrio | 1995-2002 | Base, GL, GLS, GLX, High Line | 4 Cyl 2.0 L GAS
- Jetta | 1998-1999, 1993-1995 | Base, GL, GLS, Limited Edition, TDI | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS
View More
View related parts
Volkswagen Support Cylinder Part Number: 1C0-827-550-F
$39.01 MSRP: $54.18
You Save: $15.17 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut
- Replaces: 1C0-827-550-B, 1C0-827-550-D
Fits the following Volkswagen Models:
- Beetle | 1998-2001 | Base, GL, GLS, GLX, Sport, TDI | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Strut Part Number: 3G8-827-550-C
$44.51 MSRP: $61.81
You Save: $17.30 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut
Fits the following Volkswagen Models:
- Arteon | 2019-2023 | SE, SE R-Line, SEL, SEL Premium R-Line, SEL R-Line | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Support Cylinder Part Number: 11K-827-550-A
$3.36 MSRP: $5.50
You Save: $2.14 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut
Fits the following Volkswagen Models:
- ID.4 | 2023 | Pro, Standard | BATTERY EV (EV/BEV)
View related parts
Volkswagen Lift Cylinder Part Number: 3CN-827-550-F
$3.97 MSRP: $6.50
You Save: $2.53 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut
Fits the following Volkswagen Models:
- Atlas | 2024 | SE | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Lift Cylinder Part Number: 3CN-827-550-G
$5.43 MSRP: $8.90
You Save: $3.47 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut
Fits the following Volkswagen Models:
- Atlas | 2023 | SE | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Lift Cylinder Part Number: 3CN-827-550-D
$9.88 MSRP: $16.20
You Save: $6.32 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder
Fits the following Volkswagen Models:
- Atlas | 2018-2019 | Launch Edition, S, SE, SE R-Line, SEL, SEL Premium, SEL R-Line | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Lift Cylinder Part Number: 3CN-827-552-B
$18.52 MSRP: $30.36
You Save: $11.84 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut
Fits the following Volkswagen Models:
- Atlas | 2024 | SE | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Lift Cylinder Part Number: 3CN-827-552-A
$18.62 MSRP: $30.52
You Save: $11.90 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut
Fits the following Volkswagen Models:
- Atlas | 2023 | SE, SEL, SEL Premium R-Line, SEL R-Line Black | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Drive Part Number: 3CN-827-552
$37.24 MSRP: $51.72
You Save: $14.48 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut
Fits the following Volkswagen Models:
- Atlas | 2020-2022 | S, SE, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Lift Cylinder Part Number: 561-827-550-D
$4.55 MSRP: $7.46
You Save: $2.91 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gas Filler Strut; Lift Cylinder, Support Cylinder
Fits the following Volkswagen Models:
- Passat | 2017-2022 | GT, Limited Edition, R-Line, S, SE, SE R-Line, SEL, SEL Premium, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS

| Page 1 of 6 |Next >

1-20 of 108 Results

Volkswagen Lift Support

Volkswagen Lift Support helps to keep trunks and hatches floating upward with little effort and then hold the trunk or hatch steady while you load your gear without using both hands. Since 1937 the VW story has been one of making driving accessible, from the iconic Beetle that crisscrossed continents to the Type 2 van that symbolized freedom. Today the brand combines turbocharged TSI engines, the flexible MQB platform and intuitive digital cockpits to deliver cars that are lively yet easy to use. VW teams integrate park assist, touchscreen MIB infotainment and head-up displays into day-to-day models, while the all-electric ID lineup has a clear route to a cleaner future. Every VW has the same simple, sturdy design language that helped the Beetle win hearts, demonstrating that form and function can exist together without fuss. The same philosophy directs the gas-charged Lift Support found throughout the lineup. Filled with compressed gas, each strut holds energy until the latch pops, which then releases a smooth push that balances out the weight of the panel for controlled motion. A fresh strut prevents sudden drops in cold or hot weather, protecting fingers and cargo alike. It works silently, requires no special tools to check and gives each hatch or trunk a professional, confidence-building feel that lasts mile after mile.

Buying OEM parts is a smart move to keep your long-term repair costs low. These components are built to last because VW uses such strict factory standards. At VWPartsGiant.com, it is easy to find genuine Volkswagen Lift Support at prices that actually beat the competition. You get a real manufacturer's warranty with every single part, so you know your purchase is safe. Plus, forget about return headaches since our policy is easy and worry-free. We ship your order fast, too. If you have questions, our team of parts experts is ready to help. Why wait? Start shopping now!

Volkswagen Lift Support Parts and Q&A

Lift Cylinder
1C0-827-550-E
Q: How to remove and reinstall the trunk lid with lift support struts on Volkswagen Cabrio?
A:
In order to remove the trunk lid, you must first open it and unplug the negative terminal of the battery, make sure to have the right activation code to the anti-theft system of the stereo just in case. The second step is to unclip the plastic covers so as to expose the rear lights, to unscrew the wiring connectors, and tie a strip of string to both ends of the wiring. Record adequate routing of the wiring harness, release the rubber grommets, and pull out the wiring which should be reinstalled with the strings intact. Draw the outline of every hinge using a marker, loosen and detach the hinge holding bolts to detach the trunk lid. Check the hinges to see whether they are worn or damaged and replace them should the need be. To take off the support struts, hold the trunk lid in the open posture, with the help of a small flat-bladed screwdriver, lift the spring clip and disconnect the strut on the upper and lower bases. To install, reverse the steps used in removal and position the hinges along the marks made earlier and once the trunk lid is closed, ensure it fits with the other panels and slightly adjust measures needed. Lastly, make sure that the support struts are firmly clipped in place.
Lift Cylinder
1K9-827-550-B
Q: How to access and replace the hood latch and lift support assembly on Volkswagen Jetta?
A:
To open the latch, first open the hood and take off the front bumper cover, depending on the model it might not be necessary. By opening the release coupling disconnected the hood latch cable between the mid-way point of disconnection and the main disconnection point. For this step, remove the latch fasteners, detach the electrical connector to the latch assembly, and lift the latch assembly off the radiator support, be sure to unlock the hood latch release cable and the latch wiring harness off the clips along the radiator support. After taking off the latch, separate the release cable and hood latch switch out of the latch assembly by pressing the tab and pushing out the parts. Take any required parts and make them available to the new latch and install it by following the same steps in the reverse order. With a support strut fitted, open the hood and place it firmly; a small screwdriver is then needed to raise the retaining springs at one end of the support strut on one end and the same on the other end and then remove the support strut by unscrewing the same. The support strut as well is installed in the reverse of being removed.