How can broken Valve Spring, Valve Spring Retainer and Valve Stem Oil Seal be replaced without removing the cylinder heads for V6 engines on Volkswagen Passat?

Defective valve stem seals and broken valve springs can be changed by removing the cylinder heads, normally with 2 special tools and a source of compressed air. Start with the removal of the valve cover, camshaft, and lifters, followed by the removal of the spark plug in the affected cylinder or all the spark plugs in case of replacing all the valve stem seals. Rotate the crankshaft until the piston reaches TDC where the first cylinder starts and the firing sequence should be followed, or in DOHC engines, the second cylinder should start. Insert a threaded air hose adapter into the spark plug hole and attach it to a source of compressed air and spray air into the engine to hold the valves open. Wrap rags on stuff around the valve holes to allow nothing to fall into it then carefully strike the valve spring retainers with a blow to sever the connection between the retainers and the keepers. Compress the spring using a valve spring compressor and remove the keepers using pliers or magnet, be sure to use the matching type of compressor; Import type. Unscrew the valve spring and retainer, and be careful to leave the valve held in the closed position by air pressure so as not to break it. Take off old valve stem seals, be careful of the intake and exhaust seal differences and press the valve stem in place with a rubber band or tapes and then release the air pressure. Check the valve stem, make sure that it slides freely in the guide; otherwise the head must be taken off to be repaired. Once more, apply air pressure to hold the valve, rub the stem with engine oil and fit a fresh seal, being careful that a protective sleeve is put on to prevent damage. Install the valve spring and retainer, push the spring and fit the keepers with grease to keep in place. Take the spring tool off, disconnect the air hose and take off the adapter. Lastly, re-fit the camshaft, lifters, timing belt, valve cover, spark plug(s), and wires, and start engine and investigate any oil leaks and abnormal sounds.

Genuine Volkswagen Valve Stem Oil Seal

Engine Valve Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Valve Stem Oil Seals found

View related parts
Volkswagen Valve Seals Part Number: 04E-109-675-A
$5.28 MSRP: $8.66
You Save: $3.38 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Seal
- Replaces: 04E-109-675-L
Fits the following Volkswagen Models:
- Golf | 2019-2021 | S, SE, TSi | 4 Cyl 1.4 L GAS
- Jetta | 2016-2021 | Hybrid SEL Premium, R-Line, S, SE, SEL, SEL Premium, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS
View related parts
Volkswagen Valve Seals Part Number: 026-109-675
$14.26 MSRP: $23.38
You Save: $9.12 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Seal
Fits the following Volkswagen Models:
- Cabrio | 1995-1997 | Base, High Line | 4 Cyl 2.0 L GAS
- Cabriolet | 1991-1993 | Base, Carat, Classic, Etienne Aigner, Wolfsburg Edition | 4 Cyl 1.8 L GAS
- Corrado | 1991-1992 | G60 | 4 Cyl 1.8 L GAS
- EuroVan | 1995, 1993 | Base, Camper, CL, GL, GLS, MV, Transport | 5 Cyl 2.5 L GAS
- Fox | 1991-1993 | Base, GL | 4 Cyl 1.8 L GAS
- Golf | 1991-1997 | Base, Celebration Edition, City, CL, GL, GTI, GTI 16-Valve, GTI 8-Valve, Jazz, K2, Limited Edition, Sport, Trek | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Jetta | 1991-1997 | Carat, Celebration Edition, City, GL, GLI 16-Valve, GLS, GT, Jazz, Limited Edition, Trek, Wolfsburg Edition | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Passat | 1995-1996, 1991-1993 | CL, GL, GLS | 4 Cyl 2.0 L GAS
- Vanagon | 1984 | Campmobile, GL, L | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.9 L GAS
View More
View related parts
Volkswagen Valve Seals Part Number: 05E-109-675
$0.94 MSRP: $1.55
You Save: $0.61 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Seal
Fits the following Volkswagen Models:
- Jetta | 2022-2023 | S, SE, SEL, Sport | 4 Cyl 1.5 L GAS
- Taos | 2022 | S, SE, SEL | 4 Cyl 1.5 L GAS
View related parts
Volkswagen Valve Seals Part Number: 06K-109-675-B
$0.43 MSRP: $0.70
You Save: $0.27 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Seal
Fits the following Volkswagen Models:
- Tiguan | 2018-2022 | S, SE, SE R-Line Black, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Valve Seals Part Number: 05E-109-675-D
$1.17 MSRP: $1.92
You Save: $0.75 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Seal
Fits the following Volkswagen Models:
- Jetta | 2022-2023 | S, SE, SEL, Sport | 4 Cyl 1.5 L GAS
- Taos | 2022 | S, SE, SEL | 4 Cyl 1.5 L GAS
View related parts
Volkswagen Valve Seals Part Number: 027-109-675
$13.77 MSRP: $22.58
You Save: $8.81 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Seal
Fits the following Volkswagen Models:
- Beetle | 1998-2006 | Base, GL, GLS, GLS TDI, Sport, TDI | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS
- Cabrio | 1998-2002 | Base, GL, GLS, GLX | 4 Cyl 2.0 L GAS
- Cabriolet | 1991-1993 | Base, Carat, Classic, Etienne Aigner, Wolfsburg Edition | 4 Cyl 1.8 L GAS
- Corrado | 1991-1994 | G60, SLC | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS
- EuroVan | 1999-2000, 1997 | Camper, GLS, MV | 6 Cyl 2.8 L GAS
- Fox | 1991-1993 | Base, GL | 4 Cyl 1.8 L GAS
- Golf | 1995-2006, 1987-1993 | Base, CL, GL, GL TDI, GLS, GLS TDI, GTI, GTI 16-Valve, GTI 8-Valve, GTI GLS, GTI GLX, GTI VR6, K2, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
- Jetta | 2011-2015, 1995-2006, 1987-1993 | Base, Carat, GL, GLI, GLI 16-Valve, GLS, GLX, GT, K2, S, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
- Passat | 2004-2005, 1996-1997, 1990-1994 | CL, GL, GL TDI, GLS TDI, GLX, TDI | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
- Scirocco | 1986-1988 | 16-Valve | 4 Cyl 1.8 L GAS
View More
View related parts
Volkswagen Valve Seals Part Number: 057-109-675
$26.40 MSRP: $44.00
You Save: $17.60 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Seal
Fits the following Volkswagen Models:
- Arteon | 2022-2023 | SE R-Line, SEL Premium R-Line, SEL R-Line | 4 Cyl 2.0 L GAS
- GTI | 2022-2023 | 40th Anniversary Edition, Autobahn, S, SE | 4 Cyl 2.0 L GAS
- Golf R | 2022, 2018-2019 | Base | 4 Cyl 2.0 L GAS
View More
View related parts
Volkswagen Valve Seals Part Number: 7B0-109-675-B
$9.49 MSRP: $12.94
You Save: $3.45 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Seal
Fits the following Volkswagen Models:
- Routan | 2011-2014 | S, SE, SEL, SEL Premium | 6 Cyl 3.6 L FLEX
View related parts
Volkswagen Valve Seals Part Number: 7B0-109-675
$10.52 MSRP: $14.37
You Save: $3.85 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Seal
Fits the following Volkswagen Models:
- Routan | 2009-2010 | S, SE | 6 Cyl 3.8 L GAS
View related parts
Volkswagen Valve Seals Part Number: 7B0-109-675-A
$14.24 MSRP: $19.45
You Save: $5.21 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Seal
Fits the following Volkswagen Models:
- Routan | 2009-2010 | SEL, SEL Premium | 6 Cyl 4.0 L GAS

Volkswagen Valve Stem Oil Seal

A total system failure could result from a malfunctioning Volkswagen Valve Stem Oil Seal, reducing driving comfort and posing a danger. It is for this reason that you should conduct regular inspections and replace such components in good time to enable your car to run smoothly and safely. OEM (Original Equipment Manufacturer) Volkswagen Valve Stem Oil Seals are perfect for motorists because they are the best quality parts produced as per the manufacturer's specifications; hence, they perform well and are reliable too, thus helping to retain the car's initial functionality as well as safety features. At VWPartsGiant.com, our genuine Volkswagen Valve Stem Oil Seal supply indicates how much we care about the health of your vehicle. Additionally, our stock is vast, so every product will be easily accessible to you for finding and swapping without fear of making mistakes. With our user-friendly online catalog, it takes no time to identify the right spare part. Therefore, convenience accompanies servicing or maintaining a motorcar. You can rely on our OEM Volkswagen Valve Stem Oil Seal to sustain the performance of your automobile.

Volkswagen Valve Stem Oil Seal Parts and Q&A

Valve Seals
027-109-675
Q: How can broken Valve Spring, Valve Spring Retainer and Valve Stem Oil Seal be replaced without removing the cylinder heads for V6 engines on Volkswagen Passat?
A:
Defective valve stem seals and broken valve springs can be changed by removing the cylinder heads, normally with 2 special tools and a source of compressed air. Start with the removal of the valve cover, camshaft, and lifters, followed by the removal of the spark plug in the affected cylinder or all the spark plugs in case of replacing all the valve stem seals. Rotate the crankshaft until the piston reaches TDC where the first cylinder starts and the firing sequence should be followed, or in DOHC engines, the second cylinder should start. Insert a threaded air hose adapter into the spark plug hole and attach it to a source of compressed air and spray air into the engine to hold the valves open. Wrap rags on stuff around the valve holes to allow nothing to fall into it then carefully strike the valve spring retainers with a blow to sever the connection between the retainers and the keepers. Compress the spring using a valve spring compressor and remove the keepers using pliers or magnet, be sure to use the matching type of compressor; Import type. Unscrew the valve spring and retainer, and be careful to leave the valve held in the closed position by air pressure so as not to break it. Take off old valve stem seals, be careful of the intake and exhaust seal differences and press the valve stem in place with a rubber band or tapes and then release the air pressure. Check the valve stem, make sure that it slides freely in the guide; otherwise the head must be taken off to be repaired. Once more, apply air pressure to hold the valve, rub the stem with engine oil and fit a fresh seal, being careful that a protective sleeve is put on to prevent damage. Install the valve spring and retainer, push the spring and fit the keepers with grease to keep in place. Take the spring tool off, disconnect the air hose and take off the adapter. Lastly, re-fit the camshaft, lifters, timing belt, valve cover, spark plug(s), and wires, and start engine and investigate any oil leaks and abnormal sounds.