How to remove and inspect the sway bar and sway bar bushing on Volkswagen Jetta?

The steps include loosening the rear wheel bolts, lifting the rear part of the vehicle and holding it in place on jackstands and blocking the front wheels to ensure they do not roll over. Disassemble the rear wheels and the lower control arm stone trim protector when installed. The second step is to remove the mounting fasteners of the stabilizer bar links and dissociate the links to the bar, where the right-hand part is depicted as the left one. Pull out the stabilizer bar and remove stabilizer bar clamp mounting fasteners. Check the stabilizer bar bushings and linking bushings to any cracks, tears, or signs of wear and tear, replacing them where necessary, inspecting the ballstuds at the ends of the links when needed and checking them to be loose. To install, simply revert the steps undertaken during the removal process and all fixtures should be tightened to the recommended torque levels after which the wheel bolts should be tightened to the intended torque.

How to remove and replace the front sway bar and front sway bar bushing and its components on Volkswagen Passat?

Lift the front of the car and place it firmly on jackstands and then take off the under-vehicle splash shield. Connect the stabilizer bar links to the stabilizer bar by loosening the nuts, and removing the nut and bolt holding the link to the bar (and removing bolt B in the event of removing the control arm). The initial models might demand the total removal of the connection between the control arm and the link. Then, take the nuts out and loosen the stabilizer bar bushing clamps on the subframe and lastly face out the stabilizer bar, unbolstering the links of the control arms as needed. Check the clamps bushings and link bushings, to see whether they have any cracks, hardening, or wear, and replace when necessary. Lastly, install the parts in the order of their removal with all the fasteners tightened at the required torque.

Genuine Volkswagen Sway Bar

Sway Bar Kit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

110 Sway Bars found

View related parts
Volkswagen Lower Ball Joint Part Number: 1H0-411-309-C
$34.20 MSRP: $57.00
You Save: $22.80 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer; Lower Ball Joint
- Replaces: 1H0-411-309
Fits the following Volkswagen Models:
- Cabrio | 1995-1997 | Base, High Line | 4 Cyl 2.0 L GAS
- Corrado | 1992-1994 | SLC | 6 Cyl 2.8 L GAS
- Golf | 1993-1995 | Celebration Edition, City, GL, GTI, Limited Edition, Sport | 4 Cyl 2.0 L GAS
- Jetta | 1985-1995 | Base, Carat, Celebration Edition, City, GL, GLI, GLI 16-Valve, GLS, Limited Edition, Wolfsburg Edition | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Passat | 1993-1994 | GL, GLX | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View More
View related parts
Volkswagen Stabilizer Bar Part Number: 1J0-411-305-Q
$75.37 MSRP: $105.56
You Save: $30.19 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- Golf | 2002-2006 | GL, GL TDI, GLS, GLS TDI, GTI 1.8T, GTI VR6, TDI | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Stabilizer Bar Part Number: 5QN-511-305-A
$80.65 MSRP: $112.95
You Save: $32.30 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer; Stabilizer Bar
Fits the following Volkswagen Models:
- Tiguan | 2018-2024 | S, SE, SE R-Line Black, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Jet Black | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Stabilizer Bar Part Number: 5Q0-511-305-AT
$84.49 MSRP: $118.33
You Save: $33.84 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer; Stabilizer Bar
Fits the following Volkswagen Models:
- GTI | 2022-2024 | 40th Anniversary Edition, Autobahn, S, SE | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Stabilizer Bar Part Number: 561-411-303-G
$199.71 MSRP: $279.70
You Save: $79.99 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- Passat | 2018-2022 | GT, Limited Edition, R-Line, S, SE, SE R-Line, SEL, SEL Premium, Wolfsburg Edition | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Stabilizer Bar Part Number: 5Q0-511-305-AR
$98.77 MSRP: $138.33
You Save: $39.56 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer; Stabilizer Bar
Fits the following Volkswagen Models:
- GTI | 2022-2023 | 40th Anniversary Edition, Autobahn, S, SE | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Stabilizer Bar Part Number: 3Q0-411-303-T
$104.68 MSRP: $146.62
You Save: $41.94 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- Arteon | 2019-2023 | SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Stabilizer Bar Part Number: 1J0-511-409-H
$90.44 MSRP: $126.66
You Save: $36.22 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- Golf | 2004 | GL, GL TDI, GLS, GLS TDI, GTI 1.8T, GTI VR6 | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
- R32 | 2004 | Base | 6 Cyl 3.2 L GAS
View related parts
Volkswagen Stabilizer Bar Part Number: 5QM-511-305-C
$91.15 MSRP: $127.66
You Save: $36.51 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- GTI | 2015-2021 | Autobahn, Rabbit Edition, S, SE, Sport | 4 Cyl 2.0 L GAS
- Golf | 2015-2021 | Base, Launch Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL, TSi, Wolfsburg Edition | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
- Golf Alltrack | 2017-2019 | S, SE, SEL | 4 Cyl 1.8 L GAS
- Golf R | 2015-2019 | Base | 4 Cyl 2.0 L GAS
- Golf SportWagen | 2015-2019 | Limited Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
- e-Golf | 2015-2019 | Limited Edition, SE, SEL Premium | BATTERY EV (EV/BEV)
View More
View related parts
Volkswagen Stabilizer Bar Part Number: 5Q0-411-303-AC
$98.57 MSRP: $138.05
You Save: $39.48 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer; Stabilizer Bar
Fits the following Volkswagen Models:
- Golf Alltrack | 2017-2019 | S, SE, SEL | 4 Cyl 1.8 L GAS
- Golf R | 2022-2023, 2018-2019 | 20th Anniversary Edition, Base | 4 Cyl 2.0 L GAS
- Golf SportWagen | 2015-2019 | Limited Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
View More
View related parts
Volkswagen Stabilizer Bar Part Number: 1EA-511-305-M
$96.91 MSRP: $135.72
You Save: $38.81 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- ID.4 | 2021-2022 | 1st Edition, Pro, Pro S | BATTERY EV (EV/BEV)
View related parts
Volkswagen Stabilizer Bar Part Number: 1K0-511-409-BH
$98.18 MSRP: $137.50
You Save: $39.32 (29%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- Golf R | 2012-2013 | Base | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Stabilizer Bar Part Number: 1EA-511-305-J
$111.37 MSRP: $155.98
You Save: $44.61 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- ID.4 | 2021-2023 | 1st Edition, Pro, Pro S, Pro S Plus, S, Standard | BATTERY EV (EV/BEV)
View related parts
Volkswagen Stabilizer Bar Part Number: 5QM-411-303-C
$73.45 MSRP: $102.86
You Save: $29.41 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- Taos | 2022 | S, SE, SEL | 4 Cyl 1.5 L GAS
View related parts
Volkswagen Stabilizer Bar Part Number: 3QF-511-305-L
$115.22 MSRP: $161.36
You Save: $46.14 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- Atlas | 2018-2024 | Launch Edition, Peak Edition SE, Peak Edition SEL, S, SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Atlas Cross Sport | 2020-2024 | S, SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black, Trendline | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Stabilizer Bar Part Number: 5Q0-511-305-BD
$119.06 MSRP: $166.74
You Save: $47.68 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- Golf | 2015-2019 | Base, Launch Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL, Wolfsburg Edition | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
- Golf R | 2022, 2015-2019 | Base | 4 Cyl 2.0 L GAS
- e-Golf | 2015-2019 | Limited Edition, SE, SEL Premium | BATTERY EV (EV/BEV)
View More
View related parts
Volkswagen Stabilizer Bar Part Number: 7D0-511-407
$110.67 MSRP: $155.00
You Save: $44.33 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- EuroVan | 1999-2003 | GLS, MV | 6 Cyl 2.8 L GAS
View related parts
Volkswagen Stabilizer Bar Part Number: 5QM-511-305
$121.62 MSRP: $170.33
You Save: $48.71 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- Golf | 2015-2021 | Base, Launch Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL, TSi, Wolfsburg Edition | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
- Golf Alltrack | 2017-2019 | S, SE, SEL | 4 Cyl 1.8 L GAS
- Golf R | 2015-2019 | Base | 4 Cyl 2.0 L GAS
- Golf SportWagen | 2015-2019 | Limited Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
- e-Golf | 2015-2019 | Limited Edition, SE, SEL Premium | BATTERY EV (EV/BEV)
View More
View related parts
Volkswagen Stabilizer Bar Part Number: 3B0-511-409-C
$113.05 MSRP: $158.33
You Save: $45.28 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- Passat | 1999-2005 | 4 Motion, GL, GLS, GLS 4 Motion, GLX, GLX 4 Motion, W8 | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 4.0 L GAS
View related parts
Volkswagen Stabilizer Bar Part Number: 251-411-025
$114.24 MSRP: $160.00
You Save: $45.76 (29%)
ADD TO CART
Product Specifications
- Other Name: Stabilizer
Fits the following Volkswagen Models:
- Transporter | 1985-1991 | Base | 4 Cyl 1.9 L GAS, 4 Cyl 2.1 L GAS
- Vanagon | 1984-1991 | Base, Campmobile, Carat, GL, L, Syncro | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.9 L GAS, 4 Cyl 2.1 L GAS

| Page 1 of 6 |Next >

1-20 of 110 Results

Volkswagen Sway Bar

Volkswagen Sway Bar holds every car steady by minimizing body roll. The VW appeal starts with its history as the original people car that evolved from iconic Beetle and versatile Type 2 van to sleek sedans and groundbreaking electric ID models, all united by clean design, reliable TSI turbo power and cost-saving MQB platform that means spacious cabins, digital cockpits. Smart technology such as park assist and MIB infotainment are spreading through the lineup, so drivers enjoy friendly prices, good fuel efficiency and a friendly driving feel that makes every car easy to trust in daily life or long road trips. At the heart of that confident handling is the Sway Bar, a torsion spring connecting the left and right suspension arms, which can twist as the car corners and immediately push back against lean, allowing the chassis to keep level without requiring stiff springs to do so, giving a smooth ride over bumps. This simple yet tough steel bar functions exactly the same in compact hatchbacks, roomy SUVs and electric models, providing universal value through the VW family by making steering response sharper, enhancing tire grip and providing drivers with clear feedback during quick lane changes. Routine checking of bushings and end links ensures that the Sway Bar continues to operate at optimal levels, ensuring that every VW enjoy the balanced road manners that are becoming synonymous with the brand.

Buying OEM parts is a smart move to keep your long-term repair costs low. These components are built to last because VW uses such strict factory standards. At VWPartsGiant.com, it is easy to find genuine Volkswagen Sway Bar at prices that actually beat the competition. You get a real manufacturer's warranty with every single part, so you know your purchase is safe. Plus, forget about return headaches since our policy is easy and worry-free. We ship your order fast, too. If you have questions, our team of parts experts is ready to help. Why wait? Start shopping now!

Volkswagen Sway Bar Parts and Q&A

Stabilizer Bar
1K0-411-303-AS
Q: How to remove and inspect the sway bar and sway bar bushing on Volkswagen Jetta?
A:
The steps include loosening the rear wheel bolts, lifting the rear part of the vehicle and holding it in place on jackstands and blocking the front wheels to ensure they do not roll over. Disassemble the rear wheels and the lower control arm stone trim protector when installed. The second step is to remove the mounting fasteners of the stabilizer bar links and dissociate the links to the bar, where the right-hand part is depicted as the left one. Pull out the stabilizer bar and remove stabilizer bar clamp mounting fasteners. Check the stabilizer bar bushings and linking bushings to any cracks, tears, or signs of wear and tear, replacing them where necessary, inspecting the ballstuds at the ends of the links when needed and checking them to be loose. To install, simply revert the steps undertaken during the removal process and all fixtures should be tightened to the recommended torque levels after which the wheel bolts should be tightened to the intended torque.
Stabilizer Bar
3B0-511-409-C
Q: How to remove and replace the front sway bar and front sway bar bushing and its components on Volkswagen Passat?
A:
Lift the front of the car and place it firmly on jackstands and then take off the under-vehicle splash shield. Connect the stabilizer bar links to the stabilizer bar by loosening the nuts, and removing the nut and bolt holding the link to the bar (and removing bolt B in the event of removing the control arm). The initial models might demand the total removal of the connection between the control arm and the link. Then, take the nuts out and loosen the stabilizer bar bushing clamps on the subframe and lastly face out the stabilizer bar, unbolstering the links of the control arms as needed. Check the clamps bushings and link bushings, to see whether they have any cracks, hardening, or wear, and replace when necessary. Lastly, install the parts in the order of their removal with all the fasteners tightened at the required torque.