How to replace the Hood Release Cable on Volkswagen Jetta?

The hood latch release cable used on this model has two components which include one that is joined with the hood latch and the other one joins with the release lever located in the vehicle. One should never leave the release cable of the release lever and hood latch locked in place. Firstly, unlock the hood and pull the release cable connector out of the metal support directly over the left-hand side headlamp housing and unpack the plastic cover and loosen the cables. Proceed to use a small screwdriver to lift up the clip on the inside of the vehicle and take out the lever. The second step is to pry up the front part of the sill trim and driver side kick panel, and remove the cable housing in the release lever, and the end of the cable out of the release arm. Disconnect any other retaining points in the engine compartment one of which the release cable is attached to, and connect a wire or string to the end of the old cable. When in the passenger compartment, install the cable by pulling through cowl into passenger compartment, and attaching the new cable to the string or wire and pulling it through cowl into engine compartment. The rest of the installation proceeds in designation with the opposite of the removal process, making sure that all cable holding clips are secured in their respective places. Removing the hood safety lever: This can be done by unbolting it and attaching the bolt positions to the lever on any occasion where it needs to be adjusted, loosening the bolts, and positioning the lever to align perfectly with the latch when the hood is closed and then tightening the bolts back.

How to replace the Hood Latch, Hood Release Cable and Lift Support on Volkswagen Passat?

To replace the latch, begin by opening the hood and removing the nuts or bolts to detach the latch assembly. For Passat models, pry off the retaining clip and detach the safety latch handle. Next, detach the cable from the latch assembly and remove the latch, with installation being the reverse of removal. For the cable, detach the cable case from the bracket and release the cable end from the latch in the engine compartment. In the passenger compartment, remove the driver's side kick panel and the screws securing the hood release handle, then pull the handle downward to release the cable. Attach a wire or string to the end of the old cable, and in the engine compartment, release the cable grommet from the cowl and the clips at the inner edge of the left front fender well until the cable is free. Pull the cable through the cowl into the engine compartment, connect the string or wire to the new cable, and pull it through the cowl into the passenger compartment. Complete the installation by fastening all cable retaining clips in their original location and seating the cable grommet properly. For the support strut, open the hood and support it securely, then use a small screwdriver to detach the retaining clips at both ends of the support strut before prying or pulling sharply to detach it from the vehicle, with installation being the reverse of removal.

Genuine Volkswagen Hood Release Cable

Hood Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

65 Hood Release Cables found

View related parts
Volkswagen Release Cable Part Number: 1K1-823-531-B
$29.51 MSRP: $49.18
You Save: $19.67 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
Fits the following Volkswagen Models:
- Jetta | 2005-2010 | 2.0T, 2.5, GL, GLI, GLS, S, SE, SEL, Value Edition, Wolfsburg Edition | 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
- Rabbit | 2006-2009 | 2.5, S | 5 Cyl 2.5 L GAS
View related parts
Volkswagen Release Cable Part Number: 5K1-823-531
$29.51 MSRP: $49.18
You Save: $19.67 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
Fits the following Volkswagen Models:
- GTI | 2010-2014 | Base, Driver's Edition, Wolfsburg Edition | 4 Cyl 2.0 L GAS
- Golf | 2010-2014 | Base, TDI | 4 Cyl 2.0 L DIESEL, 5 Cyl 2.5 L GAS
- Golf R | 2012-2013 | Base | 4 Cyl 2.0 L GAS
- Jetta | 2010-2014 | S, SE, SEL, TDI, TDI Cup Edition, Wolfsburg Edition | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View More
View related parts
Volkswagen Release Cable Part Number: 5G1-823-531-C
$33.71 MSRP: $56.18
You Save: $22.47 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
Fits the following Volkswagen Models:
- GTI | 2015-2021 | Autobahn, Rabbit Edition, S, SE, Sport | 4 Cyl 2.0 L GAS
- Golf | 2015-2021 | Base, Launch Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL, TSi, Wolfsburg Edition | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
- Golf Alltrack | 2017-2019 | S, SE, SEL | 4 Cyl 1.8 L GAS
- Golf R | 2015-2019 | Base | 4 Cyl 2.0 L GAS
- Golf SportWagen | 2015-2019 | Limited Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
- e-Golf | 2015-2019 | Limited Edition, SE, SEL Premium | BATTERY EV (EV/BEV)
View More
View related parts
Volkswagen Release Cable Part Number: 5C7-823-531
$33.83 MSRP: $56.38
You Save: $22.55 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
Fits the following Volkswagen Models:
- Jetta | 2011-2018 | Base, GLI, GLI SE, GLI SEL, Hybrid, Hybrid SE, Hybrid SEL, Hybrid SEL Premium, S, SE, SE Sport, SEL, SEL Premium, Sport, TDI, TDI Premium, TDI S, TDI SE, TDI SEL, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Release Cable Part Number: 561-823-531-A
$36.95 MSRP: $51.32
You Save: $14.37 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
- Replaces: 561-823-531
Fits the following Volkswagen Models:
- Passat | 2012-2022 | GT, Limited Edition, R-Line, S, SE, SE R-Line, SEL, SEL Premium, Sport, TDI SE, TDI SEL, TDI SEL Premium, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Release Cable Part Number: 3C1-823-531
$38.87 MSRP: $53.99
You Save: $15.12 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
Fits the following Volkswagen Models:
- CC | 2009-2017 | 4 Motion, Executive, Executive 4 Motion, Lux, Lux Limited, Lux Plus, Luxury, R-Line, R-Line Executive, Sport, Sport Plus, Trend, V6 Executive 4Motion, VR6, VR6 4Motion, VR6 4Motion Executive, VR6 Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Passat | 2006-2010 | 2.0T, 3.6, Komfort, Lux, Turbo, Value Edition, VR6, Wolfsburg Edition | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Release Cable Part Number: 3G8-823-535
$40.19 MSRP: $55.82
You Save: $15.63 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable; Release Cable
Fits the following Volkswagen Models:
- Arteon | 2019-2023 | SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Release Cable Part Number: 5TB-823-531
$40.91 MSRP: $56.82
You Save: $15.91 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable; Release Cable
Fits the following Volkswagen Models:
- Tiguan | 2018-2024 | S, SE, SE R-Line Black, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Jet Black | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Release Cable Part Number: 7L6-823-531
$42.35 MSRP: $58.82
You Save: $16.47 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
Fits the following Volkswagen Models:
- Touareg | 2004-2015 | Base, Hybrid, TDI, TDI Executive, TDI Lux, TDI R-Line, TDI Sport, V6, V6 Executive, V6 Lux, V6 R-Line, V6 Sport, V8, VR6, X | 10 Cyl 5.0 L DIESEL, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.0 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 4.2 L GAS
View related parts
Volkswagen Cable Part Number: 3CM-823-528
$3.40 MSRP: $5.58
You Save: $2.18 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bowden Cable
Fits the following Volkswagen Models:
- Atlas | 2021-2024 | Peak Edition SE, Peak Edition SEL, S, SE, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Atlas Cross Sport | 2020-2024 | S, SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Cable Part Number: 3CM-823-530
$3.40 MSRP: $5.58
You Save: $2.18 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bowden Cable
Fits the following Volkswagen Models:
- Atlas | 2021-2024 | Peak Edition SE, Peak Edition SEL, S, SE, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Atlas Cross Sport | 2020-2024 | S, SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Release Cable Part Number: 3CM-823-536
$3.87 MSRP: $6.34
You Save: $2.47 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
Fits the following Volkswagen Models:
- Atlas | 2020-2024 | Peak Edition SE, Peak Edition SEL, S, SE, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Atlas Cross Sport | 2020-2022 | S, SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Cover Part Number: 4H0-823-543
$7.02 MSRP: $11.50
You Save: $4.48 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Cable, Release Cable Cover
- Position: Right
Fits the following Volkswagen Models:
- Arteon | 2019-2023 | SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line | 4 Cyl 2.0 L GAS
- Atlas | 2021-2024 | Peak Edition SE, Peak Edition SEL, S, SE, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Atlas Cross Sport | 2020-2024 | S, SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- GTI | 2022-2024 | 40th Anniversary Edition, Autobahn, S, SE | 4 Cyl 2.0 L GAS
- Golf R | 2022-2023 | 20th Anniversary Edition, Base | 4 Cyl 2.0 L GAS
View More
View related parts
Volkswagen Release Cable Part Number: 2GJ-823-531-D
$15.73 MSRP: $25.78
You Save: $10.05 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
Fits the following Volkswagen Models:
- Taos | 2022-2024 | S, SE, SEL | 4 Cyl 1.5 L GAS
View related parts
Volkswagen Release Cable Part Number: 3CM-823-531
$16.58 MSRP: $27.18
You Save: $10.60 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
Fits the following Volkswagen Models:
- Atlas | 2020-2024 | Peak Edition SE, Peak Edition SEL, S, SE, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Atlas Cross Sport | 2020-2022 | S, SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Release Cable Part Number: 3B1-823-535-D
$17.19 MSRP: $28.18
You Save: $10.99 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
Fits the following Volkswagen Models:
- Passat | 1998-2005 | 4 Motion, GL, GL TDI, GLS, GLS 4 Motion, GLS TDI, GLX, GLX 4 Motion, W8 | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 6 Cyl 2.8 L GAS, 8 Cyl 4.0 L GAS
View related parts
Volkswagen Release Cable Part Number: 7B0-823-530
$44.74 MSRP: $62.13
You Save: $17.39 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
Fits the following Volkswagen Models:
- Routan | 2009-2014 | S, SE, SEL, SEL Premium | 6 Cyl 3.6 L FLEX, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Volkswagen Release Cable Part Number: 5H0-823-528-C
$29.87 MSRP: $49.78
You Save: $19.91 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
Fits the following Volkswagen Models:
- GTI | 2022-2024 | 40th Anniversary Edition, Autobahn, S, SE | 4 Cyl 2.0 L GAS
- Golf R | 2022-2023 | 20th Anniversary Edition, Base | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Release Cable Part Number: 5N0-823-531-A
$31.19 MSRP: $51.98
You Save: $20.79 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
- Replaces: 5N0-823-531
Fits the following Volkswagen Models:
- Tiguan | 2009-2017 | R-Line, S, SE, SEL, Sport, Wolfsburg Edition | 4 Cyl 2.0 L GAS
- Tiguan Limited | 2017-2018 | Base | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Release Cable Part Number: 8D1-823-531-C
Product Specifications
- Other Name: Cable
Fits the following Volkswagen Models:
- EuroVan | 1999-2003, 1997, 1995, 1993 | Camper, CL, GL, GLS, MV | 5 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS

| Page 1 of 4 |Next >

1-20 of 65 Results

Volkswagen Hood Release Cable

Volkswagen Hood Release Cable provides quick and reliable access to the engine bay, allowing any driver to pop the hood with a light pull from inside the cabin. VW started in 1937 with the intention of providing dependable mobility for the masses and that dream continues to live on in icons such as the Beetle and the flexible Type 2 van. The brand now combines clean design with TSI turbo engines, direct fuel injection, and the cost-saving MQB platform with touchscreen MIB infotainment, digital cockpits, park assist, and head-up displays for added comfort and safety. Its growing ID family of electric cars demonstrates VW's commitment to sustainable progress and owners value the balanced handling, solid build, and long-term value found in every model. The same emphasis on usability defines the simple yet important Hood Release Cable that joins the inside lever to dual front latches to translate a gentle tug into a smooth two-stage release so both hooks disengage simultaneously and the panel lifts evenly. Built with corrosion-resistant strands and durable sheathing, this type of cable is resistant to fraying and moisture, making it easy to check regularly without any mess. Regular inspection of the part assures against stuck panels and enables drivers to get to fluids, belts, and filters without delay, saving engines and maintaining the confidence people expect from every VW vehicle.

Buying OEM parts is a smart move to keep your long-term repair costs low. These components are built to last because VW uses such strict factory standards. At VWPartsGiant.com, it is easy to find genuine Volkswagen Hood Release Cable at prices that actually beat the competition. You get a real manufacturer's warranty with every single part, so you know your purchase is safe. Plus, forget about return headaches since our policy is easy and worry-free. We ship your order fast, too. If you have questions, our team of parts experts is ready to help. Why wait? Start shopping now!

Volkswagen Hood Release Cable Parts and Q&A

Release Cable
1K1-823-531-C
Q: How to replace the Hood Release Cable on Volkswagen Jetta?
A:
The hood latch release cable used on this model has two components which include one that is joined with the hood latch and the other one joins with the release lever located in the vehicle. One should never leave the release cable of the release lever and hood latch locked in place. Firstly, unlock the hood and pull the release cable connector out of the metal support directly over the left-hand side headlamp housing and unpack the plastic cover and loosen the cables. Proceed to use a small screwdriver to lift up the clip on the inside of the vehicle and take out the lever. The second step is to pry up the front part of the sill trim and driver side kick panel, and remove the cable housing in the release lever, and the end of the cable out of the release arm. Disconnect any other retaining points in the engine compartment one of which the release cable is attached to, and connect a wire or string to the end of the old cable. When in the passenger compartment, install the cable by pulling through cowl into passenger compartment, and attaching the new cable to the string or wire and pulling it through cowl into engine compartment. The rest of the installation proceeds in designation with the opposite of the removal process, making sure that all cable holding clips are secured in their respective places. Removing the hood safety lever: This can be done by unbolting it and attaching the bolt positions to the lever on any occasion where it needs to be adjusted, loosening the bolts, and positioning the lever to align perfectly with the latch when the hood is closed and then tightening the bolts back.
Release Cable
3B1-823-531-D
Q: How to replace the Hood Latch, Hood Release Cable and Lift Support on Volkswagen Passat?
A:
To replace the latch, begin by opening the hood and removing the nuts or bolts to detach the latch assembly. For Passat models, pry off the retaining clip and detach the safety latch handle. Next, detach the cable from the latch assembly and remove the latch, with installation being the reverse of removal. For the cable, detach the cable case from the bracket and release the cable end from the latch in the engine compartment. In the passenger compartment, remove the driver's side kick panel and the screws securing the hood release handle, then pull the handle downward to release the cable. Attach a wire or string to the end of the old cable, and in the engine compartment, release the cable grommet from the cowl and the clips at the inner edge of the left front fender well until the cable is free. Pull the cable through the cowl into the engine compartment, connect the string or wire to the new cable, and pull it through the cowl into the passenger compartment. Complete the installation by fastening all cable retaining clips in their original location and seating the cable grommet properly. For the support strut, open the hood and support it securely, then use a small screwdriver to detach the retaining clips at both ends of the support strut before prying or pulling sharply to detach it from the vehicle, with installation being the reverse of removal.