How to improve access to the vehicle's rear bumper for inspection and removal on Volkswagen Cabrio?

Jack the rear of the car and rest it on axle stands to chock the front wheels in order to improve access. Unscrew and take the bolts on the bottom of the bumper out. Gingerly remove the trim caps at the top of the bumper to access the retaining bolts that are at the top. Take off the top retaining bolts and loosen them and then push the bumper off the vehicle at the rear. Check the bumper shock absorbers that are attached at the back of the vehicle to check whether they are damaged or deformed and replace them in case of damage. Installation is an inversion of the removal process, whereby the correct functionality of the bumper ends to the slides is taken care of as the bumper is correctly respecified.

What are the steps involved in removing and reinstalling front and rear bumpers, including considerations for the support beams and electrical components on Volkswagen Jetta?

Front and rear bumpers are made up of fascia or bumper cover and metal structural beam with some minor differences in some models in the sequences of removal. In order to take off the front bumper cover, lift the car and undo the negative battery connection. Unscrew the bottom bumper cover mounting screws and then unscrew the hood from the top to get to the top mounting screws. The fenderwell splash shield has lower section which can be peeled back to reach the fenderwell bumper fasteners on each side. In case of the presence of a front spoiler, dismount its mounting fasteners and pull off the spoiler. With caution, stiffen the edges of the bumper cover at the rear, unclip them of the fenderwell, and draw the grille forward to loosen the retaining tabs at the bottom. Unplug any electrical connectors of the bumper-mounted parts, and then push the bumper assembly out and be careful of the paint and any headlight wiper hoses. Installation is done in the same order but in a reverse manner, to make sure that the alignment occurs, and the parking assist system can require calibration after the installation. In the case of the bumper support beam, take off the bolts joining the beam to the frame and put the beam back by attaching all the fasteners and then tightening them loosely. In the case of the rear bumper cover, first take out the taillight housing fitted into the body, then operate in the rear wheelwells, unscrewing fasteners in the liner and the evaporator canister shield. Take out the lower fasteners, which are under the bumper, release the sides of the bumper cover and release the upper tabs out of the taillight housing recess. Unscrew any electrical connectors that have attached to bumper-mounted parts, and then push the bumper assembly out with care. Removal is the opposite of reinstallation, making sure that everything is properly aligned and then tightened after which the parking assist system may be calibrated as well. In the case of the rear bumper support beam, the bolts attaching it to the frame are removed, where certain models might have brackets to the blind-spot detection system which must be removed before the support beam itself is removed, and then replaced by loosely fitting all the fasteners before tightening.

Genuine Volkswagen Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

170 Bumpers found

View related parts
Volkswagen Bumper Cover Part Number: 1J5-807-217-J-GRU
$198.19 MSRP: $277.59
You Save: $79.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
Fits the following Volkswagen Models:
- Jetta | 1999-2005 | GL, GL TDI, GLI, GLS, GLS TDI, GLX, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Bumper Cover Part Number: 1K5-807-417-H-GRU
$233.66 MSRP: $327.25
You Save: $93.59 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 1K5-807-417-F-GRU, 1K5-807-417-A-GRU
Fits the following Volkswagen Models:
- Jetta | 2005-2010 | 2.0T, 2.5, GLI, S, SE, SEL, TDI, TDI Cup Edition, Value Edition, Wolfsburg Edition | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Bumper Cover Part Number: 1K0-807-217-A-GRU
$247.06 MSRP: $337.52
You Save: $90.46 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
Fits the following Volkswagen Models:
- GTI | 2006-2007 | Base, Fahrenheit | 4 Cyl 2.0 L GAS
- Jetta | 2005-2010 | 2.0T, 2.5, GL, GL TDI, GLI, GLS, GLS TDI, S, SE, SEL, TDI, TDI Cup Edition, Value Edition, Wolfsburg Edition | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Bumper Cover Part Number: 1Y0-807-421-G-GRU
$232.20 MSRP: $325.22
You Save: $93.02 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 1Y0-807-421-A-GRU
Fits the following Volkswagen Models:
- Beetle | 2003-2005 | GL, GLS, GLX | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Bumper Cover Part Number: 1J5-807-417-B-GRU
$249.97 MSRP: $341.48
You Save: $91.51 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
Fits the following Volkswagen Models:
- Jetta | 1999-2005 | GL, GL TDI, GLI, GLS, GLS TDI, GLX, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Bumper Cover Part Number: 1C0-807-421-J-GRU
$254.20 MSRP: $347.26
You Save: $93.06 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
Fits the following Volkswagen Models:
- Beetle | 1999-2005 | GL, GLS, GLS TDI, GLX, Sport | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Bumper Cover Part Number: 1E0-807-417-A-GRU
$289.07 MSRP: $394.90
You Save: $105.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
Fits the following Volkswagen Models:
- Cabrio | 1999-2002 | Base, GL, GLS, GLX | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Bumper Cover Part Number: 1K9-807-417-B-GRU
$329.39 MSRP: $449.99
You Save: $120.60 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 1K9-807-417-GRU
Fits the following Volkswagen Models:
- Jetta | 2009-2014 | S, SE, SEL, TDI | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Bumper Cover Part Number: 1K6-807-417-C-GRU
$306.11 MSRP: $418.18
You Save: $112.07 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
Fits the following Volkswagen Models:
- GTI | 2006-2009 | Base, Fahrenheit | 4 Cyl 2.0 L GAS
- R32 | 2008 | Base | 6 Cyl 3.2 L GAS
- Rabbit | 2006-2009 | 2.5, S | 5 Cyl 2.5 L GAS
View More
View related parts
Volkswagen Bumper Cover Part Number: 5GM-807-417-GRU
$323.76 MSRP: $442.30
You Save: $118.54 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
Fits the following Volkswagen Models:
- GTI | 2015-2017 | Autobahn, S, SE, Sport | 4 Cyl 2.0 L GAS
- Golf | 2015-2017 | Base, Launch Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
View related parts
Volkswagen Bumper Cover Part Number: 561-807-421-K-GRU
$321.84 MSRP: $439.67
You Save: $117.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
Fits the following Volkswagen Models:
- Passat | 2016-2019 | GT, R-Line, S, SE, SE R-Line, SEL, SEL Premium, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Bumper Cover Part Number: 701-807-417-2BC
$338.54 MSRP: $462.49
You Save: $123.95 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
Fits the following Volkswagen Models:
- EuroVan | 1999-2003, 1997 | Camper, GLS, MV | 6 Cyl 2.8 L GAS
View related parts
Volkswagen Bumper Cover Part Number: 1C0-807-421-P-GRU
$317.48 MSRP: $433.71
You Save: $116.23 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
Fits the following Volkswagen Models:
- Beetle | 2002-2004 | Turbo S | 4 Cyl 1.8 L GAS
View related parts
Volkswagen Bumper Cover Part Number: 5GE-807-217-CL-GRU
$318.19 MSRP: $434.69
You Save: $116.50 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
Fits the following Volkswagen Models:
- e-Golf | 2016 | SE, SEL Premium | BATTERY EV (EV/BEV)
View related parts
Volkswagen Bumper Cover Part Number: 5C5-807-417-AD-GRU
$351.63 MSRP: $480.37
You Save: $128.74 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 5C5-807-417-J-GRU, 5C5-807-417-C-GRU
Fits the following Volkswagen Models:
- Beetle | 2012-2016 | Base, Classic, Denim, Dune, Fleet Edition, GSR, R-Line, R-Line S, R-Line SE, R-Line SEL, S, SE, SEL, TDI, Turbo, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volkswagen Bumper Cover Part Number: 561-807-217-B-GRU
$337.39 MSRP: $460.91
You Save: $123.52 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 561-807-217-A-GRU
Fits the following Volkswagen Models:
- Passat | 2012-2015 | Limited Edition, S, SE, SEL, SEL Premium, Sport, TDI SE, TDI SEL, TDI SEL Premium, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 5 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Bumper Cover Part Number: 1C0-807-421-E-GRU
$324.07 MSRP: $442.71
You Save: $118.64 (27%)
ADD TO CART
Product Specifications
- Other Name: Cover
Fits the following Volkswagen Models:
- Beetle | 1998 | Base, TDI | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Bumper Cover Part Number: 5G6-807-417-BQ-GRU
$381.24 MSRP: $520.82
You Save: $139.58 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover
Fits the following Volkswagen Models:
- Golf R | 2018-2019 | Base | 4 Cyl 2.0 L GAS
- e-Golf | 2017-2019 | Limited Edition, SE, SEL Premium | BATTERY EV (EV/BEV)
View related parts
Volkswagen Bumper Cover Part Number: 5G6-807-417-AP-GRU
$365.99 MSRP: $499.99
You Save: $134.00 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Replaces: 5G6-807-417-AK-GRU, 5G6-807-417-K-GRU
Fits the following Volkswagen Models:
- e-Golf | 2015-2016 | Limited Edition, SE, SEL Premium | BATTERY EV (EV/BEV)
View related parts
Volkswagen Bumper Cover Part Number: 1E0-807-217-B-GRU
Product Specifications
- Other Name: Cover
Fits the following Volkswagen Models:
- Cabrio | 1999-2002 | Base, GL, GLS, GLX | 4 Cyl 2.0 L GAS

| Page 1 of 9 |Next >

1-20 of 170 Results

Volkswagen Bumper

Volkswagen Bumper is a smart protective shield that absorbs low-speed impacts, maintains the integrity of the cabin, and keeps repair bills low, giving every driver peace of mind. For more than eight decades, the brand has combined practicality with personality, starting with the original people car in Wolfsburg and developing through such icons as the Beetle and the Type 2 van. Today, its lineup features crisp styling, TSI turbo engines, and the flexible MQB platform, so parts fit efficiently across hatchbacks, sedans, SUVs, and the new electric ID family. VW digital cockpits, park assist, and MIB infotainment systems meet solid build quality to produce cars that are advanced yet approachable, while the brand's drive towards battery power demonstrates its eye on the future. Equally forward-thinking, the front and rear Bumper found across VW vehicles use a hidden metal beam teamed with energy-absorbing foam or honeycomb sections to spread crash forces before they reach vital components. Smooth outer covers retain the clean lines fans expect, while lighter materials like aluminum reduce weight without sacrificing strength. Because mounting points adhere to shared VW standards, owners can replace a damaged unit quickly, opt for finishes ranging from chrome to textured black, and restore both style and safety in one simple step.

Buying OEM parts is a smart move to keep your long-term repair costs low. These components are built to last because VW uses such strict factory standards. At VWPartsGiant.com, it is easy to find genuine Volkswagen Bumper at prices that actually beat the competition. You get a real manufacturer's warranty with every single part, so you know your purchase is safe. Plus, forget about return headaches since our policy is easy and worry-free. We ship your order fast, too. If you have questions, our team of parts experts is ready to help. Why wait? Start shopping now!

Volkswagen Bumper Parts and Q&A

Bumper Cover
1E0-807-217-B-GRU
Q: How to improve access to the vehicle's rear bumper for inspection and removal on Volkswagen Cabrio?
A:
Jack the rear of the car and rest it on axle stands to chock the front wheels in order to improve access. Unscrew and take the bolts on the bottom of the bumper out. Gingerly remove the trim caps at the top of the bumper to access the retaining bolts that are at the top. Take off the top retaining bolts and loosen them and then push the bumper off the vehicle at the rear. Check the bumper shock absorbers that are attached at the back of the vehicle to check whether they are damaged or deformed and replace them in case of damage. Installation is an inversion of the removal process, whereby the correct functionality of the bumper ends to the slides is taken care of as the bumper is correctly respecified.
Bumper Cover
1K9-807-417-B-GRU
Q: What are the steps involved in removing and reinstalling front and rear bumpers, including considerations for the support beams and electrical components on Volkswagen Jetta?
A:
Front and rear bumpers are made up of fascia or bumper cover and metal structural beam with some minor differences in some models in the sequences of removal. In order to take off the front bumper cover, lift the car and undo the negative battery connection. Unscrew the bottom bumper cover mounting screws and then unscrew the hood from the top to get to the top mounting screws. The fenderwell splash shield has lower section which can be peeled back to reach the fenderwell bumper fasteners on each side. In case of the presence of a front spoiler, dismount its mounting fasteners and pull off the spoiler. With caution, stiffen the edges of the bumper cover at the rear, unclip them of the fenderwell, and draw the grille forward to loosen the retaining tabs at the bottom. Unplug any electrical connectors of the bumper-mounted parts, and then push the bumper assembly out and be careful of the paint and any headlight wiper hoses. Installation is done in the same order but in a reverse manner, to make sure that the alignment occurs, and the parking assist system can require calibration after the installation. In the case of the bumper support beam, take off the bolts joining the beam to the frame and put the beam back by attaching all the fasteners and then tightening them loosely. In the case of the rear bumper cover, first take out the taillight housing fitted into the body, then operate in the rear wheelwells, unscrewing fasteners in the liner and the evaporator canister shield. Take out the lower fasteners, which are under the bumper, release the sides of the bumper cover and release the upper tabs out of the taillight housing recess. Unscrew any electrical connectors that have attached to bumper-mounted parts, and then push the bumper assembly out with care. Removal is the opposite of reinstallation, making sure that everything is properly aligned and then tightened after which the parking assist system may be calibrated as well. In the case of the rear bumper support beam, the bolts attaching it to the frame are removed, where certain models might have brackets to the blind-spot detection system which must be removed before the support beam itself is removed, and then replaced by loosely fitting all the fasteners before tightening.