How to re-learn several systems after disconnecting the battery related to the Ignition Lock Cylinder and Ignition Switch on Volkswagen Jetta?

In case of battery disconnection, a number of systems have to be learnt again before they can properly operate. The steering lock housing is installed under the steering column electronic control module which is composed of a cast-metal lock housing, ignition lock cylinder, ignition switch and electronic immobilizer induction coil. Start by removing the cable on the negative terminal of the battery. Then take out the steering column covers, steering wheel, clock-spring and steering column switch assembly. In models that have automatic transaxles, make sure that the shift linkage is in Park when taking the lock cylinder out or when reinstalling the lock cylinder. Insert a key into the lock and switch the key to the On position, and unconnect the electrical connector with the electronic immobilizer induction coil. To unlock the key lock cylinder, leave the key in the On position and position the mark on the trim with the access hole. Take a straightened metal clip and insert it in the hole of the cylinder and draw the key and lock cylinder together with the induction coil out of the housing, taking care not to lose the electronic immobilizer induction coil which is part of the lock cylinder and cannot be removed separately. Installation of the key lock cylinder follows the same procedure whereby it should be placed in its original position and pushed in until it clips into place. Flip the Lock position key and take out the key. In the case of the ignition switch without the keyless entry system, loosen the steering column mounting bolts and make the steering column lower and disconnect the electrical connector to ignition switch, unlock the ignition switch by pushing the tabs in the lock housing and pull out the ignition switch. In cars that have the keyless entry system, remove the center console, disconnect the electrical connector on the switch, open the tabs on the switch, and remove the switch out of the console. To remove the lock housing, remove the steering column covers, trim, and steering column electrical connections, loosen the mounting bolts of the steering column and lower the steering column. Unscrew electrical connector to ignition switch and electronic immobilizer induction coil and find then head of sheare bolts on top of steering column bracket, drill holes in all of these, do not damage mounting brackets. Installation is the opposite of removal, screwing the new shear bolts till they explode their heads.

What potential issues and necessary steps are involved in disconnecting the battery and replacing the ignition lock cylinder and ignition switch on Volkswagen Passat?

The detachment of the battery can cause the problems in the driveability, which will be solved only with the help of a scan tool, and it can also cause the appearance of warning lights on the instrument panel, which will also have to be turned off with the help of a scan tool. The majority of the public scan tools cannot do all these functions and this implies that a dealer service department or an appropriately equipped service repair centre will have to be visited after any service performance. Moreover, the models with an anti-theft radio have to be properly activated with a code prior to disconnecting the battery. The ignition switch is a cast metal housing, an ignition lock cylinder, and an electrical part, which is placed under the steering column. Check the switch, reach inside it and de-connect the electrical connector, then back probe with an ohmmeter, making sure that continuity exists between the corresponding terminals in various positions on the switch. In case continuity is wrong, then the switch ought to be changed. To change it, first of all, disconnect the negative battery cable and open the steering column covers and ignition switch shroud. On automatic transmission models, it is important to make sure that the shift linkage is in the Park position before moving on. Disconnect the park/lock cable and disconnect the ignition switch by disconnecting the large electrical connector and unscrewing the mounting screws, which may contain a locking coating which has to be chipped off. In order to complete this task, push the key into the key lock cylinder, then turn it to the Start position and then use a piece of paper clip to force the key out. To remove the ignition assembly, chisel the steering column bracket shear bolts. Installation of the key lock cylinder should be done with the On position facing the correct direction and pushed in until it clips. All the remaining part of the installation is in the opposite order of removal.

Genuine Volkswagen Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

32 Ignition Lock Cylinders found

View related parts
Volkswagen Cylinder & Keys Part Number: 191-905-855
$32.56 MSRP: $45.22
You Save: $12.66 (28%)
ADD TO CART
Product Specifications
- Other Name: Cylinder
Fits the following Volkswagen Models:
- Cabriolet | 1985-1987 | Base, Wolfsburg Edition | 4 Cyl 1.8 L GAS
- Golf | 1985-1987 | Base, GL, GT, GTI, GTI 16-Valve | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.8 L GAS
- Jetta | 1985-1989 | Base, Carat, GL, GLI, GLI 16-Valve, Wolfsburg Edition | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.8 L GAS
- Rabbit | 1984 | L | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.7 L GAS
- Scirocco | 1985-1988 | 16-Valve, Base | 4 Cyl 1.8 L GAS
View More
View related parts
Volkswagen Lock Cylinder Part Number: 7B0-857-113-A
$54.95 MSRP: $76.58
You Save: $21.63 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder
Fits the following Volkswagen Models:
- Routan | 2009-2014 | S, SE, SEL, SEL Premium | 6 Cyl 3.6 L FLEX, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Volkswagen Cylinder & Keys Part Number: 1EM-905-855
$99.51 MSRP: $139.37
You Save: $39.86 (29%)
ADD TO CART
Product Specifications
- Other Name: Cylinder
Fits the following Volkswagen Models:
- Cabrio | 1999 | Base, GLS | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Cylinder & Keys Part Number: 357-905-855-B
$109.63 MSRP: $153.55
You Save: $43.92 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder
- Replaces: 1HM-905-855
Fits the following Volkswagen Models:
- Cabrio | 1995-1999 | Base, GL, GLS, High Line | 4 Cyl 2.0 L GAS
- Cabriolet | 1987-1993 | Base, Bestseller, Boutique, Carat, Classic, Etienne Aigner, Wolfsburg Edition | 4 Cyl 1.8 L GAS
- Corrado | 1990-1994 | G60, SLC | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS
- EuroVan | 1999-2001, 1997, 1995, 1993 | Camper, CL, GL, GLS, MV | 5 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
- Golf | 1988-1999 | Base, Celebration Edition, City, GL, GT, GTI, GTI 16-Valve, GTI 8-Valve, GTI VR6, Jazz, K2, Limited Edition, Sport, Trek, Wolfsburg Edition | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
- Jetta | 1988-1999 | Base, Carat, Celebration Edition, City, GL, GLI 16-Valve, GLS, GLX, GT, Jazz, K2, Limited Edition, TDI, Trek, Wolfsburg Edition | 4 Cyl 1.6 L DIESEL, 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
- Passat | 1990-1997 | CL, GL, GLS, GLX, TDI | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View More
View related parts
Volkswagen Lock Cylinder Part Number: 1K0-905-851-D
$83.56 MSRP: $117.03
You Save: $33.47 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Steer Lock; Lock Assembly, Lock Cylinder, Steering Lock
Fits the following Volkswagen Models:
- Atlas | 2018-2021 | Launch Edition, S, SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Atlas Cross Sport | 2020-2023 | S, SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- GTI | 2019-2021 | Autobahn, Rabbit Edition, S, SE | 4 Cyl 2.0 L GAS
- Jetta | 2019-2024 | GLI 35th Anniversary Edition, GLI Autobahn, GLI S, R-Line, S, SE, SEL, SEL Premium, Sport | 4 Cyl 1.4 L GAS, 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
- Tiguan | 2019-2021 | S, SE, SE R-Line Black, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Jet Black | 4 Cyl 2.0 L GAS
View More
View related parts
Volkswagen Ignition Lock Cylinder Part Number: 82A-905-855-Y
$113.12 MSRP: $158.43
You Save: $45.31 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder
Fits the following Volkswagen Models:
- Atlas | 2020-2022 | S, SE, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Atlas Cross Sport | 2020-2022 | S, SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Ignition Switch Part Number: 107-905-855-AF
$173.73 MSRP: $243.32
You Save: $69.59 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder
- Replaces: 107-905-855-AG
Fits the following Volkswagen Models:
- Atlas | 2018-2020 | Launch Edition, S, SE, SE R-Line, SEL, SEL Premium, SEL R-Line | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Jetta | 2019-2023 | GLI 35th Anniversary Edition, GLI Autobahn, GLI S, R-Line, S, SE, SEL, SEL Premium, Sport | 4 Cyl 1.4 L GAS, 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
- Tiguan | 2018-2020 | S, SE, SE R-Line Black, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Jet Black | 4 Cyl 2.0 L GAS
View More
View related parts
Volkswagen Ignition Lock Cylinder Part Number: 107-905-855-CB
$134.46 MSRP: $188.32
You Save: $53.86 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder; Cylinder & Keys, Ignition Cylinder, Lock Cylinder
- Replaces: 107-905-855-CA
Fits the following Volkswagen Models:
- Beetle | 1998-2005 | Base, GL, GLS, GLS TDI, GLX, Sport, TDI, Turbo S | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS
- Cabrio | 1995-1999 | Base, GL, GLS, High Line | 4 Cyl 2.0 L GAS
- Cabriolet | 1991-1993 | Base, Carat, Classic, Etienne Aigner, Wolfsburg Edition | 4 Cyl 1.8 L GAS
- Corrado | 1990-1994 | G60, SLC | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS
- EuroVan | 1999-2000, 1997, 1995, 1993 | Base, Camper, CL, GL, GLS, MV, Transport | 5 Cyl 2.4 L DIESEL, 5 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
- Golf | 1996-1998, 1994, 1991-1992 | GTI, GTI 16-Valve, GTI 8-Valve | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Jetta | 1994-2005, 1991-1992 | Carat, Celebration Edition, City, GL, GL TDI, GLI, GLI 16-Valve, GLS, GLS TDI, GLX, GT, Jazz, K2, TDI, Trek, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
- Passat | 2001-2002, 1990 | GL, GLS, GLS 4 Motion, GLX, GLX 4 Motion, W8 | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 4.0 L GAS
View More
View related parts
Volkswagen Ignition Lock Cylinder Part Number: 107-905-855-CH
$139.22 MSRP: $194.99
You Save: $55.77 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder
- Replaces: 107-905-855-CC
Fits the following Volkswagen Models:
- Beetle | 2003-2005 | GL, GLS, GLS TDI, GLX | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS
- Golf | 1999-2006 | GL, GL TDI, GLS, GLS TDI, GTI, GTI 1.8T, GTI 20th Anniversary, GTI 337, GTI GLS, GTI GLX, GTI VR6, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
- Jetta | 2003-2005 | GL, GL TDI, GLI, GLS, GLS TDI, GLX, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
- Passat | 2003 | GL, GLS, GLX, GLX 4 Motion, W8 | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 4.0 L GAS
- R32 | 2004 | Base | 6 Cyl 3.2 L GAS
View More
View related parts
Volkswagen Ignition Lock Cylinder Part Number: 8E0-905-855
$142.80 MSRP: $200.00
You Save: $57.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder; Lock Cylinder
Fits the following Volkswagen Models:
- Beetle | 2003-2005 | GL, GLS, GLS TDI, GLX, Turbo S | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS
- Jetta | 2003-2004 | GL, GLI, GLS, GLX, TDI, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
- Passat | 2003 | GL, GLS, GLX, GLX 4 Motion, W8 | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 4.0 L GAS
View More
View related parts
Volkswagen Lock Cylinder Part Number: 107-857-113-A
$160.64 MSRP: $224.99
You Save: $64.35 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder
Fits the following Volkswagen Models:
- Passat | 2012-2022 | GT, Limited Edition, R-Line, S, SE, SE R-Line, SEL, SEL Premium, Sport, TDI SE, TDI SEL, TDI SEL Premium, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Cylinder Part Number: 107-857-113-JG
$107.09 MSRP: $149.99
You Save: $42.90 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Cylinder
- Replaced by: 5G9-857-113-Y
Fits the following Volkswagen Models:
- Atlas | 2018-2023 | Launch Edition, S, SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Atlas Cross Sport | 2020-2023 | S, SE, SE R-Line, SEL, SEL Premium, SEL Premium R-Line, SEL R-Line, SEL R-Line Black | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Volkswagen Ignition Lock Cylinder Part Number: 7D0-905-855-A
$237.99 MSRP: $333.31
You Save: $95.32 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder; Cylinder & Keys
Fits the following Volkswagen Models:
- EuroVan | 2001-2003 | GLS, MV | 6 Cyl 2.8 L GAS
View related parts
Volkswagen Lock Cylinder Part Number: 3B0-905-855-C
$274.49 MSRP: $374.99
You Save: $100.50 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder; Lock Cylinder
Fits the following Volkswagen Models:
- Beetle | 2006-2007 | 2.5 | 5 Cyl 2.5 L GAS
- Jetta | 2005 | GL, GL TDI, GLI, GLS, GLS TDI | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Volkswagen Lock Cylinder Part Number: 1K0-905-851-B
$253.14 MSRP: $345.82
You Save: $92.68 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Steer Lock; Ignition Lock, Lock Cylinder, Lock Housing
Fits the following Volkswagen Models:
- Atlas | 2018 | Launch Edition, S, SE, SEL, SEL Premium | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- Beetle | 2012-2019 | #PinkBeetle, Base, Classic, Coast, Denim, Dune, Final Edition SE, Final Edition SEL, Fleet Edition, GSR, R-Line, R-Line S, R-Line SE, R-Line SEL, S, SE, SEL, TDI, Turbo, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
- Eos | 2010-2016 | Executive, Final Edition, Komfort, Lux, Sport | 4 Cyl 2.0 L GAS
- GTI | 2011-2018 | Autobahn, Base, Driver's Edition, S, SE, Sport, Wolfsburg Edition | 4 Cyl 2.0 L GAS
- Golf | 2011-2019 | Base, Launch Edition, S, SE, SEL, TDI, TDI S, TDI SE, TDI SEL, Wolfsburg Edition | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 5 Cyl 2.5 L GAS
- Golf Alltrack | 2017-2019 | S, SE, SEL | 4 Cyl 1.8 L GAS
- Golf R | 2015-2019, 2012-2013 | Base | 4 Cyl 2.0 L GAS
- Golf SportWagen | 2015-2019 | Limited Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
- Jetta | 2011-2018 | Base, GLI, GLI SE, GLI SEL, Hybrid SEL Premium, S, SE, SE Sport, SEL, SEL Premium, Sport, TDI, TDI S, TDI SE, TDI SEL, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
- Passat | 2012-2021 | GT, Limited Edition, R-Line, S, SE, SE R-Line, SEL, SEL Premium, Sport, TDI SE, TDI SEL, TDI SEL Premium, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View More
View related parts
Volkswagen Lock Cylinder Part Number: 107-857-113-JD
$295.84 MSRP: $404.15
You Save: $108.31 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder
Fits the following Volkswagen Models:
- CC | 2009-2017 | 4 Motion, Executive, Executive 4 Motion, Lux, Lux Limited, Lux Plus, Luxury, R-Line, R-Line Executive, Sport, Sport Plus, Trend, V6 Executive 4Motion, VR6, VR6 4Motion, VR6 4Motion Executive, VR6 Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
- GTI | 2012-2017 | Autobahn, Base, Driver's Edition, S, SE, Sport, Wolfsburg Edition | 4 Cyl 2.0 L GAS
- Golf | 2012-2019 | Base, Launch Edition, S, SE, SEL, TDI, TDI S, TDI SE, TDI SEL, Wolfsburg Edition | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 5 Cyl 2.5 L GAS
- Golf R | 2015-2019, 2012-2013 | Base | 4 Cyl 2.0 L GAS
- Golf SportWagen | 2015-2016 | Limited Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
- Passat | 2009-2010 | Komfort | 4 Cyl 2.0 L GAS
- Tiguan | 2012-2017 | R-Line, S, SE, SEL, Sport, Wolfsburg Edition | 4 Cyl 2.0 L GAS
- Tiguan Limited | 2017-2018 | Base | 4 Cyl 2.0 L GAS
- e-Golf | 2015-2019 | Limited Edition, SE, SEL Premium | BATTERY EV (EV/BEV)
View More
View related parts
Volkswagen Lock Cylinder Part Number: 107-857-113-BC
Product Specifications
- Other Name: Cylinder
Fits the following Volkswagen Models:
- Golf | 1996-1998, 1994 | GTI | 4 Cyl 2.0 L GAS
- Jetta | 1994-1998 | Celebration Edition, City, GL, GLS, GLX, GT, Jazz, K2, TDI, Trek, Wolfsburg Edition | 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Volkswagen Ignition Lock Cylinder Part Number: 6N0-905-855-G
Product Specifications
- Other Name: Cylinder; Ignition Lock Cylinder
Fits the following Volkswagen Models:
- Cabrio | 2000-2002 | GL, GLS, GLX | 4 Cyl 2.0 L GAS
View related parts
Volkswagen Ignition Lock Cylinder Part Number: 107-905-855-CF
$172.54 MSRP: $241.65
You Save: $69.11 (29%)
Ships in 1-2 Business Days
Product Specifications
- Other Name: Cylinder; Ignition Cylinder, Lock Cylinder
- Replaces: 107-905-855-CD
Fits the following Volkswagen Models:
- Beetle | 2012-2019, 2006-2010 | #PinkBeetle, 2.5, Base, Classic, Coast, Denim, Dune, Final Edition SE, Final Edition SEL, Fleet Edition, GSR, R-Line, R-Line S, R-Line SE, R-Line SEL, S, SE, SEL, TDI, Turbo, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
- Eos | 2007-2016 | 2.0T, 3.2, Base, Executive, Final Edition, Komfort, Lux, Sport, Turbo, VR6 | 4 Cyl 2.0 L GAS, 6 Cyl 3.2 L GAS
- GTI | 2006-2021 | Autobahn, Base, Driver's Edition, Fahrenheit, Rabbit Edition, S, SE, Sport, Wolfsburg Edition | 4 Cyl 2.0 L GAS
- Golf | 2010-2021 | Base, Launch Edition, S, SE, SEL, TDI, TDI S, TDI SE, TDI SEL, TSi, Wolfsburg Edition | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 5 Cyl 2.5 L GAS
- Golf Alltrack | 2017-2019 | S, SE, SEL | 4 Cyl 1.8 L GAS
- Golf R | 2015-2019, 2012-2013 | Base | 4 Cyl 2.0 L GAS
- Golf SportWagen | 2015-2019 | Limited Edition, S, SE, SEL, TDI S, TDI SE, TDI SEL | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
- Jetta | 2005-2018 | 2.0T, 2.5, Base, GL, GL TDI, GLI, GLI SE, GLI SEL, GLS, GLS TDI, Hybrid, Hybrid SE, Hybrid SEL, Hybrid SEL Premium, S, SE, SE Sport, SEL, SEL Premium, Sport, TDI, TDI Cup Edition, TDI Premium, TDI S, TDI SE, TDI SEL, Value Edition, Wolfsburg Edition | 4 Cyl 1.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
- Passat | 2012-2022, 2004-2005 | GL, GL TDI, GLS, GLS 4 Motion, GLS TDI, GLX, GLX 4 Motion, GT, Limited Edition, R-Line, S, SE, SE R-Line, SEL, SEL Premium, Sport, TDI SE, TDI SEL, TDI SEL Premium, W8, Wolfsburg Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 4.0 L GAS
- R32 | 2008 | Base | 6 Cyl 3.2 L GAS
View More
View related parts
Volkswagen Lock Cylinder Part Number: 1C0-857-113
Product Specifications
- Other Name: Cylinder; Cylinder & Keys
Fits the following Volkswagen Models:
- Beetle | 1998-2010 | 2.5, Base, GL, GLS, GLS TDI, GLX, S, SE, Sport, TDI, Turbo S | 4 Cyl 1.8 L GAS, 4 Cyl 1.9 L DIESEL, 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS

| Page 1 of 2 |Next >

1-20 of 32 Results

Volkswagen Ignition Lock Cylinder

Volkswagen Ignition Lock Cylinder gives the driver a secure yet smooth means of starting the car by sending power to the starter while unlocking components and locking the steering wheel so thieves remain frustrated. This compact Ignition Lock Cylinder routes battery power through distinct positions and modern versions include an embedded chip that allows the engine computer to check the key before fuel or spark flows, a clever layer of defense that works across the entire range. Tough metals combat wear, but when years of turning finally dull the tumblers, owners can replace the unit and enjoy that crisp click that signals dependable mobility and keeps journeys uninterrupted. Since the brand first set out in 1937 to create a people's car, VW has struck a balance between simplicity and engineering prowess, the combination of which you'll find in such classics as the Beetle and the versatile Type 2 van. Today the company's TSI turbo engines, MQB modular chassis, and digital cockpit displays demonstrate how constant refinement increases performance while keeping costs in check. Park assist, MIB touchscreens, and head-up displays make daily driving easier, while the growing ID electric series proves the brand is serious about a cleaner future. Whether a driver opts for a nimble compact or a roomy SUV, every VW bears that legacy of practical design and solid build quality.

Buying OEM parts is a smart move to keep your long-term repair costs low. These components are built to last because VW uses such strict factory standards. At VWPartsGiant.com, it is easy to find genuine Volkswagen Ignition Lock Cylinder at prices that actually beat the competition. You get a real manufacturer's warranty with every single part, so you know your purchase is safe. Plus, forget about return headaches since our policy is easy and worry-free. We ship your order fast, too. If you have questions, our team of parts experts is ready to help. Why wait? Start shopping now!

Volkswagen Ignition Lock Cylinder Parts and Q&A

Ignition Lock Cylinder
107-905-855-CF
Q: How to re-learn several systems after disconnecting the battery related to the Ignition Lock Cylinder and Ignition Switch on Volkswagen Jetta?
A:
In case of battery disconnection, a number of systems have to be learnt again before they can properly operate. The steering lock housing is installed under the steering column electronic control module which is composed of a cast-metal lock housing, ignition lock cylinder, ignition switch and electronic immobilizer induction coil. Start by removing the cable on the negative terminal of the battery. Then take out the steering column covers, steering wheel, clock-spring and steering column switch assembly. In models that have automatic transaxles, make sure that the shift linkage is in Park when taking the lock cylinder out or when reinstalling the lock cylinder. Insert a key into the lock and switch the key to the On position, and unconnect the electrical connector with the electronic immobilizer induction coil. To unlock the key lock cylinder, leave the key in the On position and position the mark on the trim with the access hole. Take a straightened metal clip and insert it in the hole of the cylinder and draw the key and lock cylinder together with the induction coil out of the housing, taking care not to lose the electronic immobilizer induction coil which is part of the lock cylinder and cannot be removed separately. Installation of the key lock cylinder follows the same procedure whereby it should be placed in its original position and pushed in until it clips into place. Flip the Lock position key and take out the key. In the case of the ignition switch without the keyless entry system, loosen the steering column mounting bolts and make the steering column lower and disconnect the electrical connector to ignition switch, unlock the ignition switch by pushing the tabs in the lock housing and pull out the ignition switch. In cars that have the keyless entry system, remove the center console, disconnect the electrical connector on the switch, open the tabs on the switch, and remove the switch out of the console. To remove the lock housing, remove the steering column covers, trim, and steering column electrical connections, loosen the mounting bolts of the steering column and lower the steering column. Unscrew electrical connector to ignition switch and electronic immobilizer induction coil and find then head of sheare bolts on top of steering column bracket, drill holes in all of these, do not damage mounting brackets. Installation is the opposite of removal, screwing the new shear bolts till they explode their heads.
Ignition Lock Cylinder
107-905-855-CB
Q: What potential issues and necessary steps are involved in disconnecting the battery and replacing the ignition lock cylinder and ignition switch on Volkswagen Passat?
A:
The detachment of the battery can cause the problems in the driveability, which will be solved only with the help of a scan tool, and it can also cause the appearance of warning lights on the instrument panel, which will also have to be turned off with the help of a scan tool. The majority of the public scan tools cannot do all these functions and this implies that a dealer service department or an appropriately equipped service repair centre will have to be visited after any service performance. Moreover, the models with an anti-theft radio have to be properly activated with a code prior to disconnecting the battery. The ignition switch is a cast metal housing, an ignition lock cylinder, and an electrical part, which is placed under the steering column. Check the switch, reach inside it and de-connect the electrical connector, then back probe with an ohmmeter, making sure that continuity exists between the corresponding terminals in various positions on the switch. In case continuity is wrong, then the switch ought to be changed. To change it, first of all, disconnect the negative battery cable and open the steering column covers and ignition switch shroud. On automatic transmission models, it is important to make sure that the shift linkage is in the Park position before moving on. Disconnect the park/lock cable and disconnect the ignition switch by disconnecting the large electrical connector and unscrewing the mounting screws, which may contain a locking coating which has to be chipped off. In order to complete this task, push the key into the key lock cylinder, then turn it to the Start position and then use a piece of paper clip to force the key out. To remove the ignition assembly, chisel the steering column bracket shear bolts. Installation of the key lock cylinder should be done with the On position facing the correct direction and pushed in until it clips. All the remaining part of the installation is in the opposite order of removal.